2-sec-butylphenol

Toxicity to microorganisms

Link to relevant study record(s)

Reference

Endpoint:

activated sludge respiration inhibition testing

Type of information:

experimental study

Adequacy of study:

key study

Study period:

26/02/1991-05/03/1991

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

other: The study has been conducted according to valid study guidelines. Deviations are in the number and values of concentrations . This is not expected to compromise the quality of the study results.

Qualifier:

equivalent or similar to guideline

Guideline:

OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test

Deviations:

yes

Remarks:

Deviations are in the number and values of concentrations . This is not expected to compromise the quality of the study results.

GLP compliance:

no

Analytical monitoring:

no

Vehicle:

no

Details on test solutions:

Method of preparation: direct dispersion in water

Test organisms (species):

other: mixed population of activated sewage sludge microorganisms

Details on inoculum:

Source: The aeration Stage of Severn Trent PLC Sewage Treatment Plant, Belper, Derbyshire
Preparation: The sample was maintained at 21°C with continuos aeration and used on the day of collection. The pH was buffered to pH 7.0 with sodium hydroxide solution and the uspended solids level adjusted to 3.9 g/l prior to use.

Test type:

not specified

Water media type:

freshwater

Limit test:

yes

Total exposure duration:

3 h

Test temperature:

21°C

pH:

PH 7.0 buffered with sodium hydroxide solution

Dissolved oxygen:

continuos aeration

Nominal and measured concentrations:

Range Finding Study:
- Test: 10, 100 and 1000 mg/l
- Reference: 3.2 and 32 mg/l
Definitive Study:
- Test 10 mg/l R1-R3 replicates
- Reference: 3.2 and 32 mg/l

Details on test conditions:

Areation: continuos
Suspended solids level adjsuted to 3.9 g/l prior to use

Reference substance (positive control):

yes

Remarks:

3,5-dichlorophenol

Duration:

3 h

Dose descriptor:

EC50

Effect conc.:

> 10 mg/L

Nominal / measured:

meas. (arithm. mean)

Conc. based on:

test mat.

Basis for effect:

inhibition of total respiration

Remarks:

respiration rate

Details on results:

R1-R3: replicates R1-R3

Results with reference substance (positive control):

Reference material: EC50 (3 hour contact time) = 12 mg/l

Reported statistics and error estimates:

Range Finding Study: Variation between controls: ± 8%
Definitive Study: Variation between controls: ± 1%

Range Finding Study (26th February 1991):

Concentration (mg/l)		O2 consumption rates mg/O2/l/min	% Inhibition
		3 hour contact time
Control	R1	0.50	-
	R2	0.43	-
Test	10	0.43	8
	100	0.10	78
	1000	0.00	100
Reference	3.2	0.42	10
	32	0.06	87

Variation between controls: ± 8%

Definitive Study (5th March 1991):

Concentration (mg/l)		O2 consumption rates mg/O2/l/min	% Inhibition
		3 hour contact time
Control	R1	0.57	-
	R2	0.56	-
Test	10   R1	0.53	6
	10   R2	0.58	<3>
	10   R3	0.58	<3>
Reference	3.2	0.56	1
	32	0.08	86

<increase>

R1 -R3: replicates R1 -R3

Variation between controls: ± 1%

Validity criteria fulfilled:

yes

Conclusions:

The test substance is toxic to microorganisms.

Executive summary:

A study was performed to assess the effect of the test substance phenol 2 -(1 -methylpropyl) on a mixed population of activated sewage sludge microorganisms. The method used followed that described in the OECD Guidelines for testing of Chemicals / Section 2: Effects on Biotic Systems, Test No. 209 "Activated Sludge, Respiration Inhibition Test". Deviations are in the number and values of concentrations (this is not expected to compromise the quality of the study results).

3,5 -Dichlorophenol was the reference substance at 3.2 and 32 mg/l. O2 consumption rates were measured after 3 h contact time at concentrations of 10, 100 and 1000 mg/l of test substance in the range finding study, and 10mg/l for the 3 replicates in the definitive study. Variation between controls was ± 8% in the range finding study and ± 1% in the definitive study. EC50 value (3h contact time) for reference substance was 12 mg/l. EC50 value (3h contact time) for test substance was >10 mg/l.

Description of key information

 EC50  (3h contact time) >10 mg/L (OECD 209).

Key value for chemical safety assessment

EC50 for microorganisms:

10 mg/L

Additional information

Phenol 2 -(1 -methylpropyl) was evaluated for its toxicity on a mixed population of activated sewage sludge microorganisms. EC50 value (3h contact time) for test substance was>10 mg/l. The test substance is toxic to microorganisms.

Test method:

The method used followed that described in the OECD Guidelines for testing of Chemicals / Section 2: Effects on Biotic Systems, Test No. 209 "Activated Sludge, Respiration Inhibition Test". Deviations are in the number and values of concentrations (this is not expected to compromise the quality of the study results).

3,5 -Dichlorophenol was the reference substance at 3.2 and 32 mg/l. O2 consumption rates were measured after 3 h contact time at concentrations of 10, 100 and 1000 mg/l of test substance in the range finding study, and 10mg/l for the 3 replicates in the definitive study. Variation between controls was ± 8% in the range finding study and ± 1% in the definitive study. EC50 value (3h contact time) for reference substance was 12 mg/l.