Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 231-824-0 | CAS number: 7757-87-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Endpoint summary
Administrative data
Key value for chemical safety assessment
Genetic toxicity in vitro
Description of key information
In vitro:
Gene mutation (Bacterial reverse mutation assay / Ames test): S. typhimurium TA 98, TA 100, TA 1535, TA 1537 and E. Coli WP2 uvrA were all negative with and without metabolic activation (OECD 471)
Cytogenicity (chromosome aberration test): negative (OECD 473)
Gene mutation (mammalian cells / mouse lymphoma assay): negative (OECD 476)
In vivo:
no data available and no further data needed
Link to relevant study records
- Endpoint:
- in vitro gene mutation study in bacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Between 22 December 2009 and 07 February 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 471 (Bacterial Reverse Mutation Assay)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.13/14 (Mutagenicity - Reverse Mutation Test Using Bacteria)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 870.5100 - Bacterial Reverse Mutation Test (August 1998)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- JAPAN: Guidelines for Screening Mutagenicity Testing Of Chemicals
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- bacterial reverse mutation assay
- Target gene:
- Histidine for Salmonella.
Tryptophan for E.Coli - Species / strain / cell type:
- S. typhimurium TA 1535, TA 1537, TA 98 and TA 100
- Details on mammalian cell type (if applicable):
- Not applicable.
- Additional strain / cell type characteristics:
- not applicable
- Species / strain / cell type:
- E. coli WP2 uvr A
- Details on mammalian cell type (if applicable):
- Not applicable.
- Additional strain / cell type characteristics:
- not applicable
- Metabolic activation:
- with and without
- Metabolic activation system:
- phenobarbitone/betanaphthoflavone induced rat liver, S9 mix
- Test concentrations with justification for top dose:
- Preliminary Toxicity Test: 0, 0.15, 0.5, 1.5, 5, 15, 50, 150, 500, 1500 and 5000 µg/plate
main test:
Experiment one: 50, 150, 500, 1500 and 5000 µg/plate
Experiment two: 50, 150, 500, 1500 and 5000 µg/plate - Vehicle / solvent:
- - Vehicle(s)/solvent(s) used: Dimethyl sulphoxide.
- Justification for choice of solvent/vehicle: The test material was fully soluble in sterile distilled water at 50 mg/mL in solubility checks performed in-house - Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation Rate for TA100
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- other: 2-Aminoanthracene at 1 µg/plate
- Remarks:
- With S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous mutation rate for TA100
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- N-ethyl-N-nitro-N-nitrosoguanidine
- Remarks:
- without S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous mutation rate for TA1535
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- other: 2-Aminoanthracene at 2 µg/plate
- Remarks:
- With S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous mutation rate of TA1535
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- N-ethyl-N-nitro-N-nitrosoguanidine
- Remarks:
- without S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation rate of TA1537
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- other: 2-Aminoanthracene at 2 µg/plate
- Remarks:
- with S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous mutation rate of TA1537
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl suphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- 9-aminoacridine
- Remarks:
- without S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation rate of TA98
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- benzo(a)pyrene
- Remarks:
- with S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation rate of TA98
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- 4-nitroquinoline-N-oxide
- Remarks:
- without S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation rate of WP2uvrA-
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- other: 2-Aminoanthracene at 10 µg/plate
- Remarks:
- with S9 mix
- Untreated negative controls:
- yes
- Remarks:
- Spontaneous Mutation rate of WP2uvrA-
- Negative solvent / vehicle controls:
- yes
- Remarks:
- Dimethyl sulphoxide
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- N-ethyl-N-nitro-N-nitrosoguanidine
- Remarks:
- without S9 mix
- Details on test system and experimental conditions:
- METHOD OF APPLICATION: in agar (plate incorporation)
DURATION
- Preincubation period: 10h
- Exposure duration: 48 - 72 hrs
- Expression time (cells in growth medium): Not applicable
- Selection time (if incubation with a selection agent): Not applicable
- Fixation time (start of exposure up to fixation or harvest of cells): 48 -72 hrs
SELECTION AGENT (mutation assays): Not applicable.
NUMBER OF REPLICATIONS: Triplicate plating.
NUMBER OF CELLS EVALUATED: Not applicable.
DETERMINATION OF CYTOTOXICITY
- Method: plates were assessed for numbers of revertant colonies and examined for effects on the growth of the bacterial background lawn. - Evaluation criteria:
- Acceptance Criteria:
The reverse mutation assay may be considered valid if the following criteria are met:
All tester strain cultures exhibit a characteristic number of spontaneous revertants per plate in the vehicle and untreated controls.
The appropriate characteristics for each tester strain have been confirmed, eg rfa cell-wall mutation and pKM101 plasmid R-factor etc.
All tester strain cultures should be in the approximate range of 1 to 9.9 x 109 bacteria per mL.
Each mean positive control value should be at least twice the respective vehicle control value for each strain, thus demonstrating both the intrinsic sensitivity of the tester strains to mutagenic exposure and the integrity of the S9-mix.
There should be a minimum of four non-toxic test material dose levels.
There should not be an excessive loss of plates due to contamination.
Evaluation criteria:
There are several criteria for determining a positive result, such as a dose-related increase in revertant frequency over the dose range tested and/or a reproducible increase at one or more concentrations in at least one bacterial strain with or without metabolic activation. Biological relevance of the results will be considered first, statistical methods, as recommended by the UKEMS can also be used as an aid to evaluation, however, statistical significance will not be the only determining factor for a positive response.
A test material will be considered non-mutagenic (negative) in the test system if the above criteria are not met.
Although most experiments will give clear positive or negative results, in some instances the data generated will prohibit a definitive judgement about the test material activity. Results of this type will be reported as equivocal. - Statistics:
- Standard deviation
- Key result
- Species / strain:
- E. coli WP2 uvr A
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity nor precipitates, but tested up to recommended limit concentrations
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- valid
- Positive controls validity:
- valid
- Key result
- Species / strain:
- S. typhimurium TA 1535, TA 1537, TA 98 and TA 100
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity nor precipitates, but tested up to recommended limit concentrations
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- valid
- Positive controls validity:
- valid
- Additional information on results:
- TEST-SPECIFIC CONFOUNDING FACTORS
-Dimethyl suphoxide solubility: The test material was fully soluble in sdimethyl sulphoxide at 50 mg/ml in solubility checks performed in-house.
- Precipitation: No test material precipitate was observed on the plates at any of the doses tested in either the presence or absence of S9-mix.
RANGE-FINDING/SCREENING STUDIES:
Preliminary Toxicity Test:
The test material was non-toxic to the strains of bacteria used (TA100 and WP2uvrA-). The test material formulation and S9-mix used in this experiment were both shown to be sterile.
COMPARISON WITH HISTORICAL CONTROL DATA:
Prior to use, the master strains were checked for characteristics, viability and spontaneous reversion rate (all were found to be satisfactory).
Results for the negative controls (spontaneous mutation rates) were considered to be acceptable.
All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies thus confirming the activity of the S9-mix and the sensitivity of the bacterial strains.
ADDITIONAL INFORMATION ON CYTOTOXICITY: None - Conclusions:
- Interpretation of results:
negative
The test material was considered to be non-mutagenic under the conditions of this test. This study has been selected as the key study because the results are sufficient in order to derive a reliable conclusion on classification and labelling in accordance with Regulation EC (No.) 1272/2008 (EU CLP). - Executive summary:
Introduction.
The method was designed to conform to the guidelines for bacterial mutagenicity testing published by the major Japanese Regulatory Authorities including METI, MHLW and MAFF. It alsoets the requirents of the OECD Guidelines for Testing of Chemicals No. 471 "Bacterial Reverse Mutation Test", Method B13/14 of Commission Regulation (EC) number 440/2008 of 30 May 2008 and the USA, EPA (TSCA) OPPTS harmonised guidelines.
Methods.
Salmonella typhimurium strains TA1535, TA1537, TA98 and TA100 and Escherichia coli strain WP2uvrA-were treated with suspensions of the test material using both the Ames plate incorporation and pre-incubation methods at five dose levels, in triplicate, both with and without the addition of a rat liver homogenate metabolising system (10% liver S9 in standard co-factors). The dose range for the range-finding test was determined in a preliminary toxicity assay and was 50 to 5000 µg/plate. The experiment was repeated on a separate day (pre-incubation method) using the same dose range as the range-finding test, fresh cultures of the bacterial strains and fresh test material formulations.
Results.
The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated.
In the range-finding test (Experiment 1 – plate incorporation method) the test material caused no visible reduction in the growth of the bacterial background lawn at any dose level in either the absence or presence of S9-mix. However, in the second experiment (pre-incubation methodology) the test material caused a visible reduction in the growth of the bacterial background lawns of all of the tester stains dosed in the absence of S9-mix at 5000 µg/plate. No toxicity was noted to any of the bacterial strains dosed in the presence of S9-mix. The toxicity observed was of insufficient severity to prevent the test material being tested up to the maximum recommended dose level of 5000 µg/plate. No test material precipitate was observed on the plates of any of the doses tested in either the presence or absence of S9-mix.
No significant increases in the frequency of revertant colonies were recorded for any of the bacterial strains, with any dose of the test material, either with or without metabolic activation or exposure method.
Conclusion.
The test material was considered to be non-mutagenic under the conditions of this test.
- Endpoint:
- in vitro cytogenicity / chromosome aberration study in mammalian cells
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- The experimental phases of the study were performed between 7 January 2010 and 20 May 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to other study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 473 (In Vitro Mammalian Chromosome Aberration Test)
- Deviations:
- yes
- Remarks:
- See discussion (deviation does not effect the reliability of the study)
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- other: in vitro mammalian chromosome aberration test
- Target gene:
- Not applicable.
- Species / strain / cell type:
- lymphocytes: human
- Details on mammalian cell type (if applicable):
- For each experiment, sufficient whole blood was drawn from the peripheral circulation of a volunteer who had been previously screened for suitability. The volunteer had not been exposed to high levels of radiation or hazardous chemicals and had not knowingly recently suffered from a viral infection.
- Additional strain / cell type characteristics:
- not applicable
- Metabolic activation:
- with and without
- Metabolic activation system:
- phenobarbitone and beta-naphthoflavone induced rat liver, S9 mix
- Test concentrations with justification for top dose:
- Experiment 1 (preliminary test): 13.0 to 3340 μg/mL
Experiment 2 (main test):
4(20)-hour without S9 0*, 52.2, 104.4*, 208.8, 417.5, 835*, 1670*, MMC 0.4*
4(20)-hour with S9 0*, 52.2, 104.4*, 208.8, 417.5, 835*, 1670*, CP 5*
24-hour without S9 0*, 52.2, 104.4*, 208.8, 417.5*, 835, 1670*, MMC 0.2*
* dose levels selected for metaphase analysis
MMC: mytomycin C
CP: cyclophosphamide - Vehicle / solvent:
- - Vehicle(s)/solvent(s) used: MEM
- Untreated negative controls:
- no
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- cyclophosphamide
- Remarks:
- In the presence of S9 mix
- Untreated negative controls:
- no
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- mitomycin C
- Remarks:
- In the absence of S9 mix
- Details on test system and experimental conditions:
- METHOD OF APPLICATION:
in medium
DURATION
- Preincubation period:
48 hrs
- Exposure duration:
Experiment1: 4 hrs with and without S9. Experiment 2: 24 hrs without S9, 4 hrs with S9.
- Expression time (cells in growth medium):
20 hrs for 4 hrs exposure.
- Selection time (if incubation with a selection agent):
Not applicable.
- Fixation time (start of exposure up to fixation or harvest of cells):
24 hrs.
SELECTION AGENT (mutation assays):
No selection agent.
SPINDLE INHIBITOR (cytogenetic assays):
Demecolcine
STAIN (for cytogenetic assays):
When the slides were dry they were stained in 5% Giemsa for 5 minutes, rinsed, dried and coverslipped using mounting medium.
NUMBER OF REPLICATIONS:
Duplicate cultures
NUMBER OF CELLS EVALUATED:
100/culture
DETERMINATION OF CYTOTOXICITY
- Method:
mitotic index - A total of 2000 lymphocyte cell nuclei were counted and the number of cells in metaphase recorded and expressed as the mitotic index and as a percentage of the vehicle control value.
-Scoring of Chromosome Damage:
Where possible the first 100 consecutive well-spread metaphases from each culture were counted, where there was approximately 50% of cells with aberrations, slide evaluation was terminated at 50 cells. If the cell had 44-48 chromosomes, any gaps, breaks or rearrangements were noted according to the simplified system of Savage (1976) recommended in the 1983 UKEMS guidelines for mutagenicity testing. Cells with chromosome aberrations were reviewed as necessary by a senior cytogeneticist prior to decoding the slides.
OTHER EXAMINATIONS:
- Determination of polyploidy:
Frequency of polyploid cells - Evaluation criteria:
- A positive response was recorded for a particular treatment if the % cells with aberrations, excluding gaps, markedly exceeded that seen in the concurrent control, either with or without a clear dose-relationship. For modest increases in aberration frequency a dose response relationship is generally required and appropriate statistical tests may be applied in order to record a positive response.
- Statistics:
- The frequency of cells with aberrations excluding gaps and the frequency of polyploid cells was compared, where necessary, with the concurrent vehicle control value using Fisher's Exact test.
- Key result
- Species / strain:
- lymphocytes: Human
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- no cytotoxicity, but tested up to precipitating concentrations
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not applicable
- Positive controls validity:
- valid
- Additional information on results:
- TEST-SPECIFIC CONFOUNDING FACTORS
- Effects of pH: There was no significant change in pH when the test material was dosed into media.
- Effects of osmolality: The osmalality did not increase by more than 50 mOsm.
- Evaporation from medium: Not applicable.
- Water solubility: Not applicable, test material suspended in MEM
- Precipitation:
Premlinary toxictiy test: The dose range for the Preliminary Toxicity Test was 13.0 to 3340 μg/ml. The molecular weight of the test material was supplied as 334 and therefore the maximum recommended dose level was 3340 μg/ml, which was equivalent to 10 mM. A precipitate of the test material was observed in the parallel blood-free cultures at the end of the exposure, at and above 52.2 μg/ml, in the 4(20)-hour pulse exposure groups and at and above 208.8 μg/ml in t e 24-hour continuous exposure group. Microscopic assessment of the slides prepared from the exposed cultures showed that metaphase cells were present up to 3340 μg/ml in the 4(20)-hour exposures in the presence and absence of metabolic activation (S9). The maximum dose with metaphases present in the 24-hour continuous exposure was 3340 μg/ml. The mitotic index data are presented in Table 1. The test material induced no evidence of toxicity in any of the exposure groups. With no clear toxicity the selection of the maximum dose level for the main experiment was based on the lowest precipitating dose level and was 1670 μg/ml for both the 4(20)-hour pulse exposure groups and 24-hour continuous exposure group.
RANGE-FINDING/SCREENING STUDIES:
Preliminary Toxicity Test
The dose range for the Preliminary Toxicity Test was 19.53 to 5000 µg/ml. The maximum dose was the maximum recommended dose level. A precipitate of the test material was observed in the parallel blood-free cultures at the end of the exposure period at all dose levels of the test material in both the 4(20)-hour exposure groups. In the 24-hour continuous exposure group precipitate was observed at and above 39.06 µg/ml in the parallel blood-free cultures although it was seen at all dose levels in the blood cultures at the end of exposure. Microscopic assessment of the slides prepared from the exposed cultures showed that metaphase cells were present up to 5000 µg/ml in all three exposure groups although there was toxicity noted in the 24-hour continuous exposure group with reduced numbers of metaphases observed at the maximum dose. Precipitate was present on the slides at all dose levels of the test material, although it did not interfere with the assessment of the metaphases it may account for some variability in the mitotic index data as its presence makes scoring more difficult. The mitotic index data are presented in Table 1 (see attached background material). The test material induced evidence of toxicity in the 24-hour continuous exposure group but only showed moderate toxicity in the 4(20)-hour exposure groups.
The selection of the maximum dose level was based on the maximum recommended dose level and the maximum dose level was 5000 µg/ml for the 4(20)-hour exposure groups. For the 24-hour continuous exposure group used in Experiment 2 the maximum dose was limited by toxicity, and was 1250 µg/ml.
COMPARISON WITH HISTORICAL CONTROL DATA: All of the vehicle control cultures had frequencies of cells with chromosome aberrations within the expected range. The positive control materials induced statistically significant increases in the frequency of cells with aberrations. The metabolic activation system was therefore shown to be functional and the test method itself was operating as expected.
MAIN TEST:
The qualitative assessment of the slides determined that the toxicity was similar to that observed in the Preliminary Toxicity Test and that there were metaphases suitable for scoring present at 1670 μg/ml in all three exposure groups. Precipitate observations were taken and were similar to those taken in the Preliminary Toxicity Test, and a precipitate of the test material was noted at and above 208.8 μg/ml. The mitotic index data are given in Table 2 and Table 3. They confirm the qualitative observations in that no inhibition of mitotic index was observed in any exposure group. The maximum dose level selected for metaphase analysis was 1670 μg/ml, which was
limited by precipitate. The chromosome aberration data are given in Table 4, Table 5 and Table 6. All of the vehicle control cultures had frequencies of cells with chromosome aberrations within the expected range. The positive control materials induced statistically significant increases in the frequency of cells with aberrations. The metabolic activation system was therefore shown to be functional and the test method itself was operating as expected. The test material did not induce any statistically significant increases in the frequency of cells with aberrations either in the absence or presence of metabolic activation. The polyploid cell frequency data are given in Table 8. The test material did not induce a statistically significant increase in the numbers of polyploid cells at any dose level in any of the exposure groups. There was no evidence of a response in the presence of metabolic activation in this study or in the MLA test performed in conjunction on the test material (Harlan Project No. 2920/0082) which can also detect clastogenic activity. In the OECD 473 Guideline, it is recommended that a repeat of the 4(20)-hour exposure with metabolic activation is performed if a negative response is seen in the first experiment, unless there is scientific justification for its omission. The quoted study was performed to meet the requirements of the OECD 476 Guideline and was negative. It was, therefore, considered that referencing this study gave adequate scientific justification for the omission of the repeat of the with metabolic activation exposure group. - Conclusions:
- Interpretation of results:
negative with and without metabolic activation
The test material did not induce a statistically significant increase in the frequency of cells with chromosome aberrations in either the absence or presence of a liver enzyme metabolising system. The test material was therefore considered to be non-clastogenic to human lymphocytes in vitro.
This study has been selected as the key study because the results are sufficient in order to derive a reliable conclusion on classification and labelling in accordance with Regulation EC (No.) 1272/2008 (EU CLP). - Executive summary:
SUMMARY
Introduction.
This report describes the results of an in vitro study for the detection of structural chromosomal aberrations in cultured mammalian cells. It supplements microbial systems insofar as it identifies potential mutagens that produce chromosomal aberrations rather than gene mutations (Scott et al, 1990). The method used followed that described in OECD Guidelines for Testing of Chemicals (1997) No. 473 "Genetic Toxicology: Chromosome Aberration Test" and Method B10 of Commission Regulation (EC) No. 440/2008 of 30 May 2008. The study design also meets the requirements of the UK Department of Health Guidelines for Testing of Chemicals for Mutagenicity.
Methods.
Duplicate cultures of human lymphocytes, treated with the test material, were evaluated for chromosome aberrations at up to three dose levels, together with vehicle and positive controls. Three treatment conditions were used for the study, i.e. 4 hours= exposure in the absence of metabolic activation (S9) with a 20-hour expression period, 4 hours in the presence of an induced rat liver homogenate metabolising system (S9), at a 2% final concentration with cell harvest after a 20-hour expression period and a 24 hours continuous exposure in the absence of metabolic activation.
Results.
All vehicle (solvent) controls had frequencies of cells with aberrations within the range expected for normal human lymphocytes. All the positive control materials induced statistically significant increases in the frequency of cells with aberrations indicating the sensitivity of the assay and the efficacy of the metabolising system. The test material was non-toxic and did not induce any statistically significant increases in the frequency of cells with aberrations, in any of the exposure conditions, using a dose range that was limited by precipitate.
Conclusion.
The test material was considered to be non-clastogenic to human lymphocytes in vitro.
- Endpoint:
- in vitro gene mutation study in mammalian cells
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- The experimental phases of the study were performed between 18 January 2010 and 08 February 2010.
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 476 (In Vitro Mammalian Cell Gene Mutation Test)
- Version / remarks:
- (1997)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.17 (Mutagenicity - In Vitro Mammalian Cell Gene Mutation Test)
- Version / remarks:
- (2008)
- Deviations:
- not specified
- GLP compliance:
- yes
- Type of assay:
- other: mammalian cell gene mutation assay
- Target gene:
- Thymidine kinase, TK +/-, locus of the L5178Y mouse lymphoma cell line.
- Species / strain / cell type:
- mouse lymphoma L5178Y cells
- Details on mammalian cell type (if applicable):
- Type and identity of media:
RPMI 1640 (R0)
Properly maintained:
Yes
Periodically checked for Mycoplasma contamination:
Yes
Periodically checked for karyotype stability:
No
Periodically "cleansed" against high spontaneous background:
Yes - Additional strain / cell type characteristics:
- not applicable
- Metabolic activation:
- with and without
- Metabolic activation system:
- phenobarbital and beta-naphthoflavone induced rat liver, S9 mix
- Test concentrations with justification for top dose:
- The maximum dose level used was equivalent to approximately 12.2 mM corresponding to 4192 mg/mL.
- Vehicle / solvent:
- Vehicle used:
Vehicle (R0 medium) treatment groups were used as the vehicle controls.
Justification for choice of vehicle:
Formed a suspension suitable for dosing at the required concentration.
Vehicle and positive controls were used in parallel with the test material. Solvent (R0 medium) treatment groups were used as the vehicle controls. Ethylmethanesulphonate (EMS) at 400 µg/mL and 150 µg/mL for the 4-hour and 24-hour exposures, respectively, were used as the positive control in the absence of metabolic activation. Cyclophosphamide (CP) at 2 µg/mL was used as the positive control in the presence of metabolic activation. - Untreated negative controls:
- no
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- cyclophosphamide
- Remarks:
- With metabolic activation
- Untreated negative controls:
- no
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- ethylmethanesulphonate
- Remarks:
- Without metabolic activation
- Details on test system and experimental conditions:
- The study was conducted according to a method that was designed to assess the potential mutagenicity of the test material on the thymidine kinase, TK +/-, locus of the L5178Y mouse lymphoma cell line. The method used meets the requirements of the OECD (476) and Method B17 of Commission Regulation (EC) No. 440/2008 of 30 May 2008.
One main experiment was performed. In this main experiment, L5178Y TK +/- 3.7.2c mouse lymphoma cells (heterozygous at the thymidine kinase locus) were treated with the test material at six dose levels, in duplicate, together with vehicle (R0 medium) and positive controls. The exposure groups used were as follows: 4 hour exposures both with and without metabolic activation, and 24 hours without metabolic activation.
The dose range of test material was selected following the results of a preliminary toxicity test and was 262 to 4192 µg/mL for all three of the exposure groups.
The maximum dose level used was equivalent to approximately 12.2 mM. - Evaluation criteria:
- Please see "Any other information on materials and methods incl. tables" section.
- Statistics:
- Please see "Any other information on materials and methods incl. tables" section.
- Key result
- Species / strain:
- mouse lymphoma L5178Y cells
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Remarks:
- non-mutagenic
- Cytotoxicity / choice of top concentrations:
- cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not applicable
- Positive controls validity:
- valid
- Additional information on results:
- RESULTS
Preliminary Toxicity Test
The dose range of the test material used in the preliminary toxicity test was 16.38 to 4192 µg/ml
In the 4-hour exposures, both in the absence and presence of metabolic activation (S9), there was evidence of a modest reduction in the relative suspension growth (%RSG) of cells treated with the test material when compared to the concurrent vehicle controls. In the 24-hour exposure in the absence of metabolic activation there was evidence of a marked reduction in %RSGvalues of cells treated with test material. A precipitate of the test material was observed at and above 32.75 µg/ml in the 4-hour exposure groups, and at and above 262 µg/ml in the 24-hour exposure group. In the subsequent mutagenicity test, the maximum dose level for all three of the exposure groups was 4192 µg/ml.
Mutagenicity Test
A summary of the results from the test is presented in attached Table 1.
4-Hour Exposure With and Without Metabolic Activation
The results of the microtitre plate counts and their analysis are presented in attached Tables 2 to 7.
As was seen in the preliminary toxicity test, there was evidence of modest dose related toxicity following exposure to the test material in both the absence and presence of metabolic activation, as indicated by the % RSG and RTG values (Tables 3 and 6). There was no evidence of any reductions in viability (%V), therefore indicating that no residual toxicity had occurred in either the absence or presence of metabolic activation. Acceptable levels of toxicity were seen with both positive control substances (Tables 3 and 6).
Neither of the vehicle control mutant frequency values were outside the acceptable range of 50 to 200 x 10-6viable cells. Both of the positive controls produced marked increases in the mutant frequency per viable cell indicating that the test system was operating satisfactorily and that the metabolic activation system was functional (Tables 3 and 6).
The test material did not induce any statistically significant or dose related (linear-trend) increases in the mutant frequency x 10-6per viable cell in either the absence or presence of metabolic activation (Tables 3 and 6). A precipitate of test material was observed at and above 262 µg/mL.
The numbers of small and large colonies and their analysis are presented in attached Tables 4 and 7.
24-Hour Exposure Without Metabolic Activation
The results of the microtitre plate counts and their analysis are presented in attached Tables 8 to 10.
As was seen in the preliminary toxicity test, once again there was evidence of marked dose related toxicity following exposure to the test material, as indicated by the %RSGand RTG values (Table 9). There was no evidence of any reductions in viability (%V), therefore indicating that no residual toxicity had occurred. Near optimum levels of toxicity were achieved. The positive control induced acceptable levels of toxicity (Table 9).
The 24-hour exposure without metabolic activation demonstrated that the extended time point had a marked effect on the toxicity of the test material.
The vehicle control mutant frequency value was within the acceptable range of 50 to 200 x 10-6viable cells. The positive control produced marked increases in the mutant frequency per viable cell indicating that the test system was operating satisfactorily (Table 9).
The test material did not induce any statistically significant or dose related (linear-trend) increases in the mutant frequency x 10-6per viable cell (Table 9). A precipitate of test material was observed at and above 262 µg/mL.
The numbers of small and large colonies and their analysis are presented in attached Table 10. - Conclusions:
- Interpretation of results:
negative, non-mutagenic
The test material did not induce any toxicologically significant increases in the mutant frequency at the TK +/- locus in L5178Y cells and is therefore considered to be non mutagenic under the conditions of the test. This study has been selected as the key study because the results are sufficient in order to derive a reliable conclusion on classification and labelling in accordance with Regulation (EC) No. 1272/2008 (EU CLP). - Executive summary:
Introduction.
The study was conducted according to a method that was designed to assess the potential mutagenicity of the test material on the thymidine kinase, TK +/-, locus of the L5178Y mouse lymphoma cell line. The method used meets the requirements of the OECD (476) and Method B17 of Commission Regulation (EC) No. 440/2008 of 30 May 2008.
Methods.
One main experiment was performed. In this main experiment, L5178Y TK +/- 3.7.2c mouse lymphoma cells (heterozygous at the thymidine kinase locus) were treated with the test material at six dose levels, in duplicate, together with vehicle (R0 medium) and positive controls. The exposure groups used were as follows: 4‑hour exposures both with and without metabolic activation, and 24 hours without metabolic activation.
The dose range of test material was selected following the results of a preliminary toxicity test and was 262 to 4192 µg/ml for all three of the exposure groups.
Results.
The maximum dose level used was equivalent to approximately 12.2 mM. A precipitate of the test material was observed at and above 262 µg/ml in all three of the exposure groups. The vehicle (solvent) controls had acceptable mutant frequency values that were within the normal range for the L5178Y cell line at the TK +/- locus. The positive control materials induced marked increases in the mutant frequency indicating the satisfactory performance of the test and of the activity of the metabolising system.
The test material did not induce any toxicologically significant dose-related increases in the mutant frequency at any dose level, either with or without metabolic activation, in any of the three exposure groups.
Conclusion.
The test material was considered to be non-mutagenic to L5178Y cells under the conditions of the test.
Referenceopen allclose all
Preliminary Toxicity Test
The test material was non-toxic to the strains of bacteria used (TA100 and WP2uvrA-). The test material formulation and S9-mix used in this experiment were both shown to be sterile.
The numbers of revertant colonies for the toxicity assay were:
With (+) or without (-) S9-mix |
Strain |
Dose (µg/plate) |
||||||||||
0 |
0.15 |
0.5 |
1.5 |
5 |
15 |
50 |
150 |
500 |
1500 |
5000 |
||
- |
TA100 |
122 |
115 |
116 |
128 |
115 |
106 |
119 |
104 |
107 |
100 |
110 |
+ |
TA100 |
94 |
91 |
99 |
104 |
71 |
90 |
97 |
91 |
98 |
88 |
84 |
- |
WP2uvrA- |
17 |
32 |
25 |
16 |
28 |
32 |
25 |
18 |
19 |
27 |
29 |
+ |
WP2uvrA- |
30 |
33 |
24 |
28 |
31 |
27 |
22 |
32 |
29 |
24 |
32 |
In the range-finding test (Experiment 1 – plate incorporation method) the test material caused no visible reduction in the growth of the bacterial background lawn at any dose level in either the absence or presence of S9-mix. However, in the second experiment (pre-incubation methodology) the test material caused a visible reduction in the growth of the bacterial background lawns of all of the tester stains dosed in the absence of S9-mix at 5000 µg/plate. No toxicity was noted to any of the bacterial strains dosed in the presence of S9-mix. The toxicity observed was of insufficient severity to prevent the test material being tested up to the maximum recommended dose level of 5000 µg/plate. No test material precipitate was observed on the plates of any of the doses tested in either the presence or absence of S9-mix.
No significant increases in the frequency of revertant colonies were recorded for any of the bacterial strains, at any dose level either with or without metabolic activation.
All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies thus confirming the activity of the S9-mix and the sensitivity of the bacterial strains.
The individual plate counts, the mean number of revertant colonies and the standard deviations for the test material, vehicle and positive controls both with and without metabolic activation for the Main test are presented in the tables below:
Table 1 Spontaneous Mutation Rates (Concurrent Negative Controls)
EXPERIMENT 1
Number of revertants (mean number of colonies per plate) |
|||||||||
Base-pair substitution type |
Frameshift type |
||||||||
TA100 |
TA1535 |
WP2uvrA- |
TA98 |
TA1537 |
|||||
104 |
|
21 |
|
19 |
|
19 |
|
9 |
|
104 |
(101) |
20 |
(24) |
21 |
(18) |
9 |
(16) |
13 |
(13) |
95 |
|
32 |
|
13 |
|
21 |
|
16 |
|
EXPERIMENT 2
Number of revertants (mean number of colonies per plate) |
|||||||||
Base-pair substitution type |
Frameshift type |
||||||||
TA100 |
TA1535 |
WP2uvrA- |
TA98 |
TA1537 |
|||||
104 |
|
20 |
|
19 |
|
22 |
|
12 |
|
102 |
(101) |
28 |
(22) |
25 |
(25) |
16 |
(19) |
11 |
(11) |
98 |
|
19 |
|
30 |
|
19 |
|
10 |
|
Table 2 Test Results: Range-Finding Test– Without Metabolic Activation
Test period |
From: 30 January 2010 |
To: 02 February 2010 |
||||||||||
With or without S9-Mix |
Test substance concentration (µg/plate) |
Number of revertants (mean number of colonies per plate) |
||||||||||
Base-pair substitution type |
Frameshift type |
|||||||||||
TA100 |
TA1535 |
WP2uvrA‑ |
TA98 |
TA1537 |
||||||||
- |
0 |
88 92 109 |
(96) 11.2# |
20 23 23 |
(22) 1.7 |
16 16 22 |
(18) 3.5 |
21 18 18 |
(19) 1.7 |
11 14 11 |
(12) 1.7 |
|
- |
50 |
82 70 85 |
(79) 7.9 |
20 16 19 |
(18) 2.1 |
13 24 19 |
(19) 5.5 |
13 12 14 |
(13) 1.0 |
13 9 12 |
(11) 2.1 |
|
- |
150 |
85 84 89 |
(86) 2.6 |
16 21 15 |
(17) 3.2 |
16 22 14 |
(17) 4.2 |
14 14 19 |
(16) 2.9 |
13 8 13 |
(11) 2.9 |
|
- |
500 |
85 77 95 |
(86) 9.0 |
19 16 16 |
(17) 1.7 |
11 22 19 |
(17) 5.7 |
12 16 14 |
(14) 2.0 |
11 13 12 |
(12) 1.0 |
|
- |
1500 |
88 90 86 |
(88) 2.0 |
14 24 24 |
(21) 5.8 |
12 12 20 |
(15) 4.6 |
12 12 12 |
(12) 0.0 |
13 11 15 |
(13) 2.0 |
|
- |
5000 |
87 93 104 |
(95) 8.6 |
20 15 16 |
(17) 2.6 |
16 16 23 |
(18) 4.0 |
15 20 15 |
(17) 2.9 |
8 9 12 |
(10) 2.1 |
|
Positive controls
S9-Mix
- |
Name Concentration (μg/plate) No. colonies per plate |
ENNG |
ENNG |
ENNG |
4NQO |
9AA |
||||||
3 |
5 |
2 |
0.2 |
80 |
||||||||
607 517 531 |
(552) 48.4 |
1683 1649 1740 |
(1691) 46.0 |
397 428 428 |
(418) 17.9 |
113 118 121 |
(117) 4.0 |
544 534 551 |
(543) 8.5 |
|||
ENNG N-ethyl-N'-nitro-N-nitrosoguanidine
4NQO 4-Nitroquinoline-1-oxide
9AA 9-Aminoacridine
# Standard deviation
Table 3 Test Results: Range-Finding Test– With Metabolic Activation
Test period |
From: 30 January 2010 |
To: 02 February 2010 |
||||||||||
With or without S9-Mix |
Test substance concentration (µg/plate) |
Number of revertants (mean number of colonies per plate) |
||||||||||
Base-pair substitution type |
Frameshift type |
|||||||||||
TA100 |
TA1535 |
WP2uvrA‑ |
TA98 |
TA1537 |
||||||||
+ |
0 |
99 102 97 |
(99) 2.5# |
12 12 10 |
(11) 1.2 |
20 19 18 |
(19) 1.0 |
16 24 23 |
(21) 4.4 |
11 15 13 |
(13) 2.0 |
|
+ |
50 |
88 91 109 |
(96) 11.4 |
9 9 11 |
(10) 1.2 |
13 18 23 |
(18) 5.0 |
17 24 15 |
(19) 4.7 |
8 15 14 |
(12) 3.8 |
|
+ |
150 |
84 74 81 |
(80) 5.1 |
12 12 11 |
(12) 0.6 |
19 15 18 |
(17) 2.1 |
17 15 19 |
(17) 2.0 |
13 15 14 |
(14) 1.0 |
|
+ |
500 |
75 76 81 |
(77) 3.2 |
9 9 7 |
(8) 1.2 |
24 16 16 |
(19) 4.6 |
20 19 18 |
(19) 1.0 |
13 13 12 |
(13) 0.6 |
|
+ |
1500 |
75 85 71 |
(77) 7.2 |
9 9 12 |
(10) 1.7 |
21 16 16 |
(18) 2.9 |
18 22 15 |
(18) 3.5 |
15 16 12 |
(14) 2.1 |
|
+ |
5000 |
80 79 95 |
(85) 9.0 |
8 14 13 |
(12) 3.2 |
11 25 24 |
(20) 7.8 |
16 18 17 |
(17) 1.0 |
11 14 16 |
(14) 2.5 |
|
Positive controls
S9-Mix
+ |
Name Concentration (μg/plate) No. colonies per plate |
2AA |
2AA |
2AA |
BP |
2AA |
||||||
1 |
2 |
10 |
5 |
2 |
||||||||
1052 1258 1057 |
(1122) 117.5 |
242 213 217 |
(224) 15.7 |
166 186 223 |
(192) 28.9 |
244 260 289 |
(264) 22.8 |
143 231 96 |
(157) 68.5 |
|||
BP Benzo(a)pyrene
2AA 2-Aminoanthracene
# Standard deviation
Table 4 Test Results: Main Test– Without Metabolic Activation
Test Period |
From: 04 February 2010 |
To: 07 February 2010 |
||||||||||
With or without S9-Mix |
Test substance concentration (µg/plate) |
Number of revertants (mean number of colonies per plate) |
||||||||||
Base-pair substitution type |
Frameshift type |
|||||||||||
TA100 |
TA1535 |
WP2uvrA‑ |
TA98 |
TA1537 |
||||||||
- |
0 |
109 113 80 |
(101) 18.0# |
17 19 19 |
(18) 1.2 |
28 17 17 |
(21) 6.4 |
22 24 21 |
(22) 1.5 |
8 13 13 |
(11) 2.9 |
|
- |
50 |
92 87 97 |
(92) 5.0 |
22 21 21 |
(21) 0.6 |
21 21 21 |
(21) 0.0 |
22 22 20 |
(21) 1.2 |
14 12 12 |
(13) 1.2 |
|
- |
150 |
100 105 81 |
(95) 12.7 |
17 20 18 |
(18) 1.5 |
16 16 21 |
(18) 2.9 |
19 19 15 |
(18) 2.3 |
11 12 12 |
(12) 0.6 |
|
- |
500 |
111 90 94 |
(98) 11.2 |
16 21 21 |
(19) 2.9 |
21 20 20 |
(20) 0.6 |
21 25 19 |
(22) 3.1 |
14 11 11 |
(12) 1.7 |
|
- |
1500 |
110 96 113 |
(106) 9.1 |
16 21 17 |
(18) 2.6 |
24 15 24 |
(21) 5.2 |
18 17 17 |
(17) 0.6 |
13 13 12 |
(13) 0.6 |
|
- |
5000 |
104 * 109 * 104 * |
(106) 2.9 |
21 * 21 * 17 * |
(20) 2.3 |
22 * 22 * 18 * |
(21) 2.3 |
20 * 17 * 18 * |
(18) 1.5 |
13 * 12 * 13 * |
(13) 0.6 |
|
Positive controls
S9-Mix
- |
Name Concentration (μg/plate) No. colonies per plate |
ENNG |
ENNG |
ENNG |
4NQO |
9AA |
||||||
3 |
5 |
2 |
0.2 |
80 |
||||||||
515 613 520 |
(549) 55.2 |
359 359 365 |
(361) 3.5 |
671 690 686 |
(682) 10.0 |
153 116 146 |
(138) 19.7 |
1012 888 1019 |
(973) 73.7 |
|||
ENNG N-ethyl-N'-nitro-N-nitrosoguanidine
4NQO 4-Nitroquinoline-1-oxide
9AA 9-Aminoacridine
* Partial absence of bacterial background lawn
# Standard deviation
Deviation from the test guideline:
In the OECD 473 Guideline, it is recommended that a repeat of the 4(20)-hour exposure with metabolic activation is performed if a negative response is seen in the first experiment, unless there is scientific justification for its omission. This study was run in conjunction with a which has the capability of detecting clastogenic activity. The quoted study was performed to meet the requirements of the OECD 476 Guideline. It was, therefore, considered that referencing a study, such as the Mouse Lymphoma Assay (MLA) using L5178Y cells, gave adequate scientific justification for the omission of the repeat of the with metabolic activation exposure group.
See attached document for tables
Please see Attached "Tables 1 to 10"
Due to the nature and quantity of tables it was not possible to insert them in this section.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (negative)
Genetic toxicity in vivo
Description of key information
Since all in vitro genetic toxicity test were negative no further in vivo testing is required according to Annex VIII (8.4) of the REACh regulation.
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Genetic toxicity of trimagensium bis(orthophosphate)-4 hydrate was evaluated in three different in vitro tests.
Genetic toxicity (mutagenicity) in bacteria in vitro:
A GLP guidline according to OECD 471 is available with trimagnesium bis(orthophosphate) 4 -hydrate (Harlan, 2010).
Salmonella typhimurium strains TA1535, TA1537, TA98 and TA100 and Escherichia coli strain WP2uvrA-were treated with suspensions of the test material using both the Ames plate incorporation and pre-incubation methods at five dose levels, in triplicate, both with and without the addition of a rat liver homogenate metabolising system (10% liver S9 in standard co-factors). The concentrations used were 50 to 5000 µg/plate.
The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated. In the range-finding test (Experiment 1 – plate incorporation method) the test material caused no visible reduction in the growth of the bacterial background lawn at any dose level in either the absence or presence of S9-mix. However, in the second experiment (pre-incubation methodology) the test material caused a visible reduction in the growth of the bacterial background lawns of all of the tester stains dosed in the absence of S9-mix at 5000 µg/plate. No toxicity was noted to any of the bacterial strains dosed in the presence of S9-mix. The toxicity observed was of insufficient severity to prevent the test material being tested up to the maximum recommended dose level of 5000 µg/plate. No test material precipitate was observed on the plates of any of the doses tested in either the presence or absence of S9-mix.
No significant increases in the frequency of revertant colonies were recorded for any of the bacterial strains, with any dose of the test material, either with or without metabolic activation or exposure method. In conclusion, trimagnesium bis(orthophosphate) 4 -hydrate was considered to be non-mutagenic under the conditions of this test.
Genetic toxicity (cytogenicity) in mammalian cells in vitro:
A GLP guidline according to OECD 473 is available with trimagnesium bis(orthophosphate) 4 -hydrate (Harlan, 2010).
Duplicate cultures of human lymphocytes, treated with the test material, were evaluated for chromosome aberrations at up to three dose levels, together with vehicle and positive controls. Three treatment conditions were used for the study, i.e. 4 hours= exposure in the absence of metabolic activation (S9) with a 20-hour expression period, 4 hours in the presence of an induced rat liver homogenate metabolising system (S9), at a 2% final concentration with cell harvest after a 20-hour expression period and a 24 hours continuous exposure in the absence of metabolic activation.
All vehicle (solvent) controls had frequencies of cells with aberrations within the range expected for normal human lymphocytes. All the positive control materials induced statistically significant increases in the frequency of cells with aberrations indicating the sensitivity of the assay and the efficacy of the metabolising system. The test material was non-toxic and did not induce any statistically significant increases in the frequency of cells with aberrations, in any of the exposure conditions, using a dose range that was limited by precipitate.
In conclusion, trimagnesium bis(orthophosphate) 4 -hydrate was considered to be non-clastogenic to human lymphocytes in vitro.
Genetic toxicity (mutagenicity) in mammalian cells in vitro:
A GLP guidline according to OECD 476 is available with trimagnesium bis(orthophosphate) 4 -hydrate (Harlan, 2010)
L5178Y TK +/- 3.7.2c mouse lymphoma cells (heterozygous at the thymidine kinase locus) were treated with the test material at six dose levels, in duplicate, together with vehicle (R0 medium) and positive controls. The exposure groups used were as follows: 4‑hour exposures both with and without metabolic activation, and 24 hours without metabolic activation.
The dose range of test material was selected following the results of a preliminary toxicity test and was 262 to 4192 µg/mL for all three of the exposure groups.
The maximum dose level used was equivalent to approximately 12.2 mM. A precipitate of the test material was observed at and above 262 µg/mL in all three of the exposure groups. The vehicle (solvent) controls had acceptable mutant frequency values that were within the normal range for the L5178Y cell line at the TK +/- locus. The positive control materials induced marked increases in the mutant frequency indicating the satisfactory performance of the test and of the activity of the metabolising system. The test material did not induce any toxicologically significant dose-related increases in the mutant frequency at any dose level, either with or without metabolic activation, in any of the three exposure groups.
In conclusion, trimagnesium bis(orthophosphate) 4 -hydrate was considered to be non-mutagenic to L5178Y cells under the conditions of the test.
Justification for classification or non-classification
In accordance with Regulation (EC) No. 1272/2008 (EU CLP) no classification for genetic toxicity is proposed. As all three in vitro studies were negative no further consideration is required for this endpoint.
In addition, the Mg2+and PO43-ions are essential for life and are not considered to be genotoxic or mutagenic in standard test systems.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)