Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Test procedure in accordance with national standard methods (ASTM) without GLP.
- Qualifier:
- according to guideline
- Guideline:
- ISO No., other: ASTM-D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester
- Deviations:
- not specified
- GLP compliance:
- no
- Type of method:
- closed cup
- Key result
- Flash point:
- 0 °C
- Atm. press.:
- 101.3 kPa
- Remarks on result:
- other: corrected to standard pressure
- Conclusions:
- The flash point of Parafol 610 was determined to be < 0 °C at 101.3 kPa.
- Executive summary:
The Flash point was determined according to ASTM-D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. The flash point was measured in duplicate at 2 different days. The value for the corrected flash point was determined to be < 0 °C.
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2009
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Standard test procedure followed, but no GLP in place
- Principles of method if other than guideline:
- according to ASTM D 93 Procedure A
- GLP compliance:
- no
- Type of method:
- closed cup
- Key result
- Flash point:
- < 0 °C
- Atm. press.:
- 1 atm
- Conclusions:
- Under the conditions of this study a flash point below 0 °C at 1 atm was determined for the test substance, Hydrocarbons, C6-C10 (even numbered), n-alkanes, isoalkanes, >5% n-hexane.
- Executive summary:
Under the conditions of this study a flash point below 0 °C at 1 atm was determined for the test substance, Hydrocarbons, C6-C10 (even numbered), n-alkanes, isoalkanes, >5% n-hexane.
Referenceopen allclose all
Measurement parameters
Rotation speed of the sample stirrer: 100 rpm
Expected Flash point of the sample: 16.0 °C
Measurement
(repeat determination)
Temperature of initial ignition source application: 0 °C / 0 °C
Atmosphreic pressure: 102.3 kPa / 101.2 kPa
Flash point (uncorrrected): < 0 °C / < 0 °C
Falsh point (corrected): < 0 °C / < 0 °C
Description of key information
The flash point of Hydrocarbons, C6-C10 (even numbered), n-alkanes, isoalkanes, >5% n-hexane is below 0°C.Key value for chemical safety assessment
Additional information
A value of <0°C was measured using ASTM D 93 method by Sasol (2009).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
