Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 248-329-0 | CAS number: 27214-38-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to microorganisms
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 4 Sep - 3 Oct 2012
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Data based on the inhibition control of a ready biodegradability study. This approach is in accordance with the Guidance on information requirements and chemical safety assessment (Chapter R.7b: Endpoint specific guidance, ECHA 2008).
- Reason / purpose for cross-reference:
- reference to same study
- Qualifier:
- according to guideline
- Guideline:
- other: OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Landesanstalt für Umwelt, Messungen und Naturschutz Baden-Württemberg, Karlsruhe, Germany
- Test organisms (species):
- activated sludge, domestic
- Details on inoculum:
- - Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure): Municipal wastewater treatment plant, Breisgauer Bucht, sampled on September 3rd, 2012
- Pretreatment: The activated sludge was washed twice by settling the sludge, decanting the supernatant and re-suspending the sludge in tap water
- Concentration of sludge: 30 mg dry solids per litre (dry solid of the activated sludge was 2.9 g/L by weight measurements after 2 h drying at 110 °C - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- yes
- Total exposure duration:
- 29 d
- Details on test conditions:
- TEST CONDITIONS
- Composition of medium:
Solution A (per 1 liter demineralised water):
KH2PO4: 8.50 g
K2HPO4: 21.75 g
Na2HPO4 x 2 H2O: 33.40 g
NH4Cl: 0.50 g
Solution B:
CaCL2 x 2 H2O: 36.40 g
Solution C:
MgSO4 x 7 H2O: 22.50 g
Solution D:
FeCL3 x 6 H2O: 0.25 g
For the preparation of the mineral medium 10 mL of solution A is mixed with 800 mL demineralised water, 1 mL each of solutions B, C, and D are added and the volume is made up to 1L.
- Test temperature: 21 - 24 °C
TEST SYSTEM
- Culturing apparatus: Gas wash bottles (2000 mL) with lateral connecting pieces for butyl rubber septums were used as reactors. The liquid volume was fixed as 1500 mL each. Mixing was perfomred by a magnetic stirrer with 2 cm stir bars. The test item was added into the three test vessels. The reference compound was added to the three reference vessels. Reference compound and test item were added to the toxicity control vessel
- Number of culture flasks/concentration: 2 ( 1 flask was not considered due to preparation problems)
- Method used to create aerobic conditions: The CO2-free air production system consits of an air compressor, three 1000 mL gas wash bottles filled with dry soda lime in series followed by one bottle filled with 0.1 M NaOH. At the end of the system is one gas wash bottle filled with demineralised water, followed by an empty one to catch any drops of condensation water. A colour change of the soda lime from white to blue indicates that the CO2 absorption capacity is depleted. The CO2-free air is passed on to an air distributor with two input and 22 output channels and through PE-tubes.
- Test performed in closed vessels due to significant volatility of test substance: yes
- Details of trap for CO2 and volatile organics if used: The CO2 produced in the reactors was absorbed in two 250 mL gas wash bottles in series filled with 200 mL 0.2 M NaOH
SAMPLING
- Sampling method: Through the lateral connecting pieces through the butyl rubber septum using 5 mL PE syringes
CONTROL AND BLANK SYSTEM
- Inoculum blank: 3 flasks
- Toxicity control: 1 flask (5.15 mL of a stock solution of 10 g/L reference substance and 41.1 mg of the test item were added into the vessel. This corresponds to a concentration of 40.0 mg/L organic carbon)
- Reference: 3 flasks (5.15 mL of a stock solution of 10 g/L sodium benzoate was added into the reference vessels. This corresponds to a concentration of 20 mg/L organic carbon) - Reference substance (positive control):
- yes
- Remarks:
- benzoic acid, sodium salt
- Duration:
- 14 d
- Dose descriptor:
- NOEC
- Effect conc.:
- >= 41.1 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: result of toxicity control from ready biodegradability test
- Details on results:
- - Biodegradation in the toxicity control reached 55% within 14 days, and therefore the substance is not inhibitory of activated sludge microorganisms activity (validity criterion: > 25% biodegradation within 14 days)
- Results with reference substance (positive control):
- The reference compound sodium benzoate reached the pass level fof 60% within 7 days.
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Justification for type of information:
- Please refer to the analogue justification attached to chapter 13.
- Reason / purpose for cross-reference:
- read-across source
- Duration:
- 14 d
- Dose descriptor:
- NOEC
- Effect conc.:
- >= 41.1 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- other: result of toxicity control of ready biodegradability test
- Remarks on result:
- other: source, RA-A, CAS 91744-28-4, Cremer, 2012
Referenceopen allclose all
Biodegradation in the toxicity control vessel reached 55.0% within 14 days.
“If in a toxicity test, containing both the test and reference substance, less than 35% degradation (based on total DOC) or less than 25% (based on total ThOD or ThCO2) occurred within 14 days, the test substance can be assumed to be inhibitory.” (OECD guideline 301)
Since 55% degradation occurred in the toxicity control, the substance is with high probability not toxic to aquatic microorganisms. The test item concentration in the toxicity control of 41.1 mg/L can be used as NOEC value for the toxicity to aquatic microorganisms.
Description of key information
No inhibitory effects on the activity of activated sludge microorganisms.
Key value for chemical safety assessment
Additional information
Data on the toxicity of the target substanceGlycerol monomyristate (CAS 27214-38-6)to aquatic microorganisms are not available. The assessment was therefore based on data available for the structurally similar substance Glycerides, C12-18 di- and tri- (CAS 91744-28-4) as part of a read across approach, which is in accordance with Regulation (EC) No. 1907/2006, Annex XI, 1.5. Further justification is given within the overall summary chapter 6.1 and within the analogue justification in section 13.
The assessment of the toxicity to microorganisms of the source substance Glycerides, C12-18 di- and tri- (CAS 91744-28-4) is based on the inhibition control of the available biodegradation screening test according to OECD 301B. This approach is in accordance with the Guidance on information requirements and chemical safety assessment (Chapter R.7b, ECHA 2017). A substance can be assumed to be not inhibitory of the activity of aquatic microorganisms if, in the toxicity control of a ready biodegradation test, more than 25% biodegradation occurs within a period of 14 days (OECD Guideline 301). For Glycerides, 12-18, di- and tri- the biodegradation screening test according to OECD 301B includes a toxicity control containing 41.1 mg/L of test material. The degradation rate determined for the inhibition control was 55% after 14 days. An inhibition of the microbial activity was not observed. Therefore, the test item concentration of 41.1 mg/L was used as a NOEC (NOEC (14 d) ≥ 41.1 mg/L).
Based on the read across data it is assumed that Glycerol monomyristate (CAS 27214-38-6) has no inhibitory effects on the activity of activated sludge microorganisms.Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.