Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 235-979-5 | CAS number: 13078-36-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Biodegradation in water: screening tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Standard OECD Guideline study, Conducted according to GLP.
- Justification for type of information:
- The target substance (DTPA 3Na) is the trisodium salt of the source substance (DTPA acid). The purity of the source substance used for the ready biodegradation test was 99.47%, with no reported impurities. Since the target substance is > 99.9% pure and contains no detectable impurities, the extrapolation of ready biodegradability potential from the source to the target substance is considered valid. The source material ready biodegradation test was conducted according to OECD test guideline 301F and is considered reliable without restriction (Category1).
- Reason / purpose for cross-reference:
- read-across: supporting information
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test)
- GLP compliance:
- yes (incl. QA statement)
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge, domestic, non-adapted
- Details on inoculum:
- The microbial inoculum consisted of activated sludge mixed liquor, collected from the Midland Municipal Wastewater Treatment Plant (Midland, Michigan). This facility treats an excess of 3.0 x 106 gallons of wastewater daily, of which > 90% is from domestic sources. The mixed liquor inoculum was collected the day before the test was initiated and was continuously aerated until used. Prior to inoculation of the mineral medium, the mixed liquor suspended solids (MLSS) concentration of the mixed liquor was determined. Based on this determination, the sterile mineral medium (neutral and alkaline pH) was inoculated with the activated sludge mixed liquor to yield a final MLSS concentration of 30 ± 1 mg/L. The pH of the inoculated neutral mineral medium was measured and, if necessary, was adjusted to 7.4 ± 0.2. The pH of the inoculated alkaline mineral medium was adjusted to within pH 8.5-9.0 using a concentrated NaOH solution. After two hours of aeration, the pH 7 reaction vessels were filled and dosing was initiated. The remaining inoculated mineral medium was adjusted to pH 8.86 using 5N NaOH and aerated for greater than one hour prior to dispensing into the pH 9 reaction vessels.
Chemicals and Reagents:
Deionized water used in preparation of the mineral medium, analytical reagents, and calibration standards was purified through a MilliQ® (Millipore Corporation, Bedford, Massachusetts) water treatment system. All other chemicals used were of reagent grade and purchased from commercial sources.
Mineral Medium:
The mineral medium specified by OECD Guideline 301F was prepared by dissolving appropriate volumes of concentrated mineral stock solutions in MilliQ® water. Two batches of mineral medium were prepared to evaluate biodegradation under neutral and alkaline pH conditions. After preparation, the medium was sterilized in an autoclave using a 30-minute liquid cycle (121°C/15 p.s.i.). - Duration of test (contact time):
- 28 d
- Initial conc.:
- 54 mg/L
- Based on:
- test mat.
- Parameter followed for biodegradation estimation:
- O2 consumption
- Parameter followed for biodegradation estimation:
- CO2 evolution
- Parameter followed for biodegradation estimation:
- DOC removal
- Details on study design:
- The biodegradation reactions were contained in specially designed 1-liter reaction vessels, each containing a 500-ml portion of the inoculated mineral medium. A total of sixteen (16) reaction mixtures were prepared as described in Table 1. The test and reference materials were added to the appropriate reaction mixtures as concentrated aqueous solutions to give 54 mg/L test material and 100 mg/L Benzoate. Single killed control reactions containing 54 mg/L test material were prepared in chemically-sterilized mineral medium (250 mg/L HgCl2) to verify the absence of O2 consumption and/or CO2 evolution in the absence of biological activity.
After addition of test material, reference compound and chemical sterilant to the appropriate reaction vessels, the pH of each reaction mixture was measured. pH 7 reaction mixtures were adjusted to pH 7.4 ± 0.2 and pH 9 reaction mixtures were adjusted between pH 8.5 and pH 9 with 1N HCl or 1N NaOH as necessary. Twenty-five milliliter aliquots of the reaction mixtures from each vessel were removed to determine the initial concentrations of dissolved organic carbon (DOC), nitrate, and nitrite. After connection to the respirometer system, the reaction vessels were purged with ambient air, and the associated headspace volume of each individual reaction vessel was determined by the respirometer system. Other specific operating parameters for the respirometer system are described below.
No Positive Controls were prepared for the pH 9 sample set as a result of an error in dosing which created two additional Toxicity Controls. Viability of the inoculum was confirmed by the response of the pH 9 Toxicity Controls and correlating the results with the pH 7 Toxicity Control and the pH 7 Positive Controls. The pH 9 reaction vessels (Chambers 1-8) were configured to allow for in study sampling to monitor pH of the reaction mixtures. An in-line valve was placed on the vent line and another valve on the vent port of each reaction vessel cap. The cap was fitted with a special nut to accommodate a Lure Lock syringe adapter. A Teflon® sampling line 3-4” long was attached to the interior vent port of each cap which did not contact the reaction mixture. At each sampling interval, both valves were closed, sequestering the reaction mixture in the bottle, and in the vent line to the expansion units. A 10 mL disposable syringe with a luer Lock adapter was attached to the reaction vessel sampling port and the cap valve was opened. The bottle was then tilted enough so the sampling line was submerged in the reaction mixture. A 10 mL aliquot was removed and transferred to a 20 mL scintillation vial, which was used to measure the pH. Adjustments were made to the subsample such that the pH was within a range of pH 8.5-9 using 0.01
N NaOH. The volume of NaOH required to adjust the pH of the entire reaction mixtures within range was extrapolated from the subsample. The extrapolated volume was added to the 10 mL aliquot and returned to the reaction vessel. The mixture was allowed to mix for several minutes and the pH was monitored again. This process was repeated until a stable pH between 8.5-9 was obtained. The biodegradation reactions were incubated in a darkened room at a target temperature of approximately 22 ± 1.0°C. The reactions were magnetically stirred at 150 r.p.m. over the entire 28-day test period.
Frequency of Sampling
Measurements of gas phase O2 and CO2 in the reaction vessels occurred on six-hour sample intervals over the entire 28-day test period. Upon completion of day 28 gas measurements, the reaction mixtures in each vessel were sampled for final DOC, nitrite, and nitrate measurements. The pH of each reaction mixture was also determined at the end of the 28-day test. The pH 9 reaction mixtures were monitored for pH and adjusted weekly, as necessary, in an effort to maintain a pH between 8.5 to pH 9 for the term of the study. - Reference substance:
- benzoic acid, sodium salt
- Test performance:
- Test performed as expected. The toxicity controls indicated that the test material was not inhibitory to the microbial innoculum, and the positive control confirmed the assay functioned as expected.
- Key result
- Parameter:
- % degradation (O2 consumption)
- Value:
- 0
- St. dev.:
- 0
- Sampling time:
- 28 d
- Remarks on result:
- other: pH 7 reaction mix
- Key result
- Parameter:
- % degradation (CO2 evolution)
- Value:
- 0
- St. dev.:
- 0
- Sampling time:
- 28 d
- Remarks on result:
- other: pH 7 reaction mix
- Key result
- Parameter:
- % degradation (O2 consumption)
- Value:
- 6.6
- Sampling time:
- 28 d
- Remarks on result:
- other: pH 9 reaction mix
- Key result
- Parameter:
- % degradation (CO2 evolution)
- Value:
- 9.3
- Sampling time:
- 28 d
- Remarks on result:
- other: pH 9 reaction mix
- Details on results:
- No biodegradation of the test material was observed. DTPA did not meet the criteria of a “readily biodegradable" classification according to the current guidelines of the OECD 301 F: Manometric Respirometry Test. Increasing the pH of the reaction mixtures from 7 to approximately 9 slightly increased biodegradation (approximately 7% based on O2 consumption).
- Results with reference substance:
- Biodegradation of benzoate based on O2 consumption exceeded 60% after only 1.9 days, and reached > 100% after 28 days.
- Validity criteria fulfilled:
- yes
- Interpretation of results:
- under test conditions no biodegradation observed
- Conclusions:
- No biodegradation of the test material was observed. DTPA did not meet the criteria of a “readily biodegradable" classification according to the current guidelines of the OECD 301 F: Manometric Respirometry Test. Increasing the pH of the reaction mixtures from 7 to approximately 9 slightly increased biodegradation (approximately 7% based on O2 consumption).
- Executive summary:
The ready biodegradability of Diethylenetriaminepentaacetic acid (DTPA) was evaluated using the OECD Guideline 301 F: Manometric Respirometry Test. Biodegradation of the compound was determined at an initial concentration of 54 mg/L in pH 7 and pH 9 reaction mixtures containing a dilute municipal activated sludge inoculum. Oxygen consumption and CO2 evolution resulting from biodegradation of the compound were measured over 28 days using a Columbus Instruments MicroOxymax® respirometer system (Columbus Instruments, Inc., Columbus, Ohio). There was no degradation observed in the pH 7 matrix over the 28-day evaluation period while minimal degradation at pH 9 over the 28-day evaluation period was noted. These results demonstrate that the test material does not meet current OECD criteria for “ready biodegradability” in the Manometric Respirometry Test. Biodegradation as determined from oxygen consumption (compared to the chemical oxygen demand (COD) of the test material) is required to reach the required 60% level within a 10-day period following onset of biodegradation. Net oxygen consumption and mineralization of the test material at pH 7 were both negligible and 6.6 and 9.3%, respectively, after 28 days at pH 9, never reaching onset of biodegradation at either pH. This experiment does demonstrate that increased biodegradation of DTPA is a function of pH. The suitability of the test procedure and microbial inoculum was verified by rapid biodegradation of a positive control compound (sodium benzoate) in a pH 7 reaction mixture. Biodegradation of benzoate based on O2 consumption exceeded 60% after only 1.9 days, and reached > 100% after 28 days. Toxicity control reactions containing a mixture of 100 mg/L benzoate and 54 mg/L test material showed no evidence for inhibition of biodegradation at either pH. The observed O2 consumption and CO2 production in the biodegradation reactions can be attributed solely to biological activity, as no net O2 consumption or CO2 production was observed in biologically inhibited control reactions containing 54 mg/L of the test material.
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Justification for type of information:
- The target substance (DTPA 3Na) is the trisodiun salt of the source substance Diethylenetriaminepentaacetic acid (DTPA), and is therefore structurally very similar. The two substances have high water solubility and would be fully dissociated during the biodegradation test. The target material is neutral (pH 7.5) in solution which is comparable to the test conditions used for the biodegradation test with the acid (pH’s of 7 and 9; adjusted by the addition of sodium hydroxide). The extrapolation of ready biodegradation potential from the source to the target material is therefore considered valid.
- Reason / purpose for cross-reference:
- read-across source
- Key result
- Parameter:
- % degradation (CO2 evolution)
- Value:
- 0
- Sampling time:
- 28 d
- Key result
- Parameter:
- % degradation (O2 consumption)
- Value:
- 0
- Sampling time:
- 28 d
- Conclusions:
- DTPA trisodium salt is predicted to be 'not readily biodegradable'.
- Executive summary:
Using a read-across extrapolation approach from an OECD 301F manometric respirometry guideline study on the structural analogue DTPA acid, DTPA trisodium salt is predicted to be not readily biodegradable. The read-across approach is supported by the very close structural similarity of the two substances, particularly when dissociated in aqueous solution.
Referenceopen allclose all
None.
Description of key information
Using a read-across extrapolation approach from an OECD 301F manometric respirometry guideline study on the structural analogue DTPA acid, DTPA trisodium salt is predicted to be 'not readily biodegradable'. The read-across approach is supported by the very close structural similarity of the two substances, particularly when ionised in aqueous solution.
Key value for chemical safety assessment
- Biodegradation in water:
- under test conditions no biodegradation observed
- Type of water:
- freshwater
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.