Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 844-232-8 | CAS number: 102731-54-4
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
In the study according to OECD 439 the test item was determined to be not irritant to skin.
The test item is not categorized for serious eye damage in the study according to OECD 437.
The test item possesses an eye irritating potential based on a study conducted according to OECD 492.
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-03-16 to 2017-05-05
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Version / remarks:
- 23 July 2009
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Version / remarks:
- July 28, 2015
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- other: donors with stated consent
- Justification for test system used:
- Dermal irritation is generally defined as "the production of reversible inflammatory changes
in the skin". The potential for chemical induced skin irritation is an important consideration
in establishing procedures for the safe handling, packing and transport of chemicals. It is
usually determined in vivo in the Draize rabbit skin irritation test as described in OECD
guideline 404. Because systemic reactions play a minor role in modulating local skin toxicity
potential of chemicals, skin irritation potential may be predicted by in vitro systems, provided
they are sufficiently complex to mimic human skin barrier and cell reactivity. In an
international prevalidation study performed by ECVAM, the in vitro skin irritation test using
the human skin model EpiDerm™ and EpiSkin™ and measurement of cell viability by
dehydrogenase conversion of MTT into a blue formazan salt have turned out as a sufficiently
promising predictor for skin irritancy potential. - Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUE
- Model used: Epi-200 SIT kits, EpiDerm™
- Tissue batch number: 25810
- Delivery date: 2017-05-03
- Date of initiation of testing: 2017-05-03 start of pre-incubation
TEMPERATURE USED FOR TEST SYSTEM
- Temperature used during treatment / exposure: 37 ± 1.5 °C for 35 min, roomt temperature for 25 min
- Temperature of post-treatment incubation: 37 ± 1.5 °C
REMOVAL OF TEST MATERIAL AND CONTROLS
- Number of washing steps: at least 15
- Observable damage in the tissue due to washing: no
- Modifications to validated SOP: no
MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE
- MTT concentration: 1 mg/mL
- Incubation time: 3 h
- Microplate reader: Versamax® Molecular Devices, Softmax Pro, version 4.7.1
- Wavelength: 570 nm
NUMBER OF REPLICATE TISSUES: 3
CONTROL TISSUES USED IN CASE OF MTT DIRECT INTERFERENCE
No MTT interference
NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION: 1
PREDICTION MODEL / DECISION CRITERIA
- The test substance is considered to be irritant to skin if the viability is less or equal to 50 %.
- The test substance is considered to be non-irritant to skin if the viability is greater than 50 % - Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- each 30 μL
- Duration of treatment / exposure:
- 60 min
- Duration of post-treatment incubation (if applicable):
- 42.2 h
- Number of replicates:
- 3
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- mean
- Value:
- 81.8
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Remarks:
- 100
- Positive controls validity:
- valid
- Remarks:
- 4.5
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: no
- Direct-MTT reduction: Optical evaluation of the MTT-reducing capacity of the test item after 1 hour incubation with MTT-reagent showed weakly coloured purple oily drops. The reaction was very poor, therefore, an additional test with freeze-killed tissues was not performed, since the outcome of the test would not have been influenced importantly.
- Colour interference with MTT: no
DEMONSTRATION OF TECHNICAL PROFICIENCY: not specified
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes
- Acceptance criteria met for positive control: yes
- Acceptance criteria met for variability between replicate measurements: yes
- Range of historical values: positive control 4.37 +/- 21.6 % viability; negative control 1.74 +/- 9.4 Absorbance - Interpretation of results:
- GHS criteria not met
- Conclusions:
- In the study according to OECD 439 the test item was determined to be not irritant to skin.
- Executive summary:
The in vitro study was performed to assess the irritation potential of the test item by means of the Human Skin Model Test.
The colourless test item did not change colour when mixed with deionised water (pre-test for colour interference). An additional test with viable tissues (without MTT addition) was not necessary. In the pre-test for direct MTT reduction a few very weak purple coloured oily drops were observed indicating a slight MTT reducing potential of the test item. Since the reaction was extremely poor, it was relinquished to perform an additional test with freezekilled tissues to determine a correction factor for calculating the true viability in the main experiment. Each three tissues of the human skin model EpiDerm™ were treated with the test item, the negative control (DPBS) or the positive control (5% SLS) for 60 minutes. After treatment with the negative control the absorbance values were well within the required range of the acceptability criterion of mean OD ≥ 0.8 and ≤ 2.8 for the 60 minutes treatment interval, thus assuring the quality of the tissues. Treatment with the positive control induced a sufficient decrease in the relative absorbance as compared to the negative control for the 60 minutes treatment interval, and thus assuring the validity of the test system. After treatment with the test item BIO4307/2 the mean relative absorbance value decreased to 81.8 % compared to the relative absorbance value of the negative control. This value is above the threshold for irritancy of ≤ 50%. Therefore, the test item is not considered to possess an irritant potential. In conclusion, it can be stated that in this study and under the experimental conditions reported, the test item is not irritant to skin.
Reference
Results
Dose Group | Tissue No. | Absorbance 570 nm Well 1 | Absorbance 570 nm Well 2 | Absorbance 570 nm Well 3 | Mean Absorbance of 3 Wells | Mean- Absorbance of three Wells Blank corrected | Mean Absorbance of 3 Tissues after Blank Correction | Rel. Absorbance [%] Tissue 1, 2 + 3 | Relative Standard Deviation [%] | Mean Rel. Absorbance [% of Negative Control] |
Blank | 0.038 | 0.038 | 0.036 | 0.037 | 0 | |||||
Negative Control | 1 | 1.567 | 1.518 | 1.537 | 1.541 | 1.504 | 1.38 | 108.9 | 8.6 | 100 |
2 | 1.405 | 1.407 | 1.414 | 1.409 | 1.372 | 99.4 | ||||
3 | 1.294 | 1.308 | 1.307 | 1.303 | 1.266 | 91.7 | ||||
Positive Control | 1 | 0.096 | 0.102 | 0.101 | 0.1 | 0.062 | 0.062 | 4.5 | 5.1 | 4.5 |
2 | 0.097 | 0.095 | 0.095 | 0.096 | 0.059 | 4.3 | ||||
3 | 0.102 | 0.104 | 0.101 | 0.102 | 0.065 | 4.7 | ||||
Test Item | 1 | 1.222 | 1.311 | 1.314 | 1.282 | 1.245 | 1.129 | 90.2 | 10.8 | 81.8 |
2 | 1.043 | 1.044 | 1.032 | 1.04 | 1.002 | 72.6 | ||||
3 | 1.161 | 1.172 | 1.195 | 1.176 | 1.139 | 82.6 |
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- weight of evidence
- Study period:
- 2017-03-27 to 2017-04-06
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- other: MatTek Corporation Protocol: EpiOcular™ Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals; for use with MatTek Corporation’s Reconstructed Human EpiOcular™ Model
- Version / remarks:
- 29 June 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- July, 2015
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Species:
- human
- Details on test animals or tissues and environmental conditions:
- - Justification of the test method and considerations regarding applicability
In a prevalidation study performed by Avon Products Inc. and MatTek Corporation, the in vitro eye test using the human cornea model EpiOcular™ and measurement of cell viability by dehydrogenase conversion of MTT into a blue formazan salt have turned out as a sufficiently promising predictor for eye irritancy potential.
The EpiOcular ™ Eye Irritation Test (EIT) was validated by the European Union Reference laboratory for Alternatives to Animal Testing (EURL ECVAM) and cosmetics Europe between 2008 and 2013. - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount applied: 50 μL - Duration of treatment / exposure:
- 30 min
- Duration of post- treatment incubation (in vitro):
- 120 min
- Number of animals or in vitro replicates:
- 2
- Details on study design:
- - Details of the test procedure used
- RhCE tissue construct used, including batch number: EpiOcular™ tissue, 23774
- Duration and temperature of exposure, post-exposure immersion and post-exposure incubation periods: standard culture conditions (37 ± 1.5 °C, 5 ± 0.5% CO2, 95% RH), only for 12 minute immersion incubation (post-soak) room temperature was used
- Indication of controls used for direct MTT-reducers and/or colouring test chemicals: Test item showed no direct MTT reducing or colouring properties. Therefore, no further controls were needed.
- Wavelength used for quantifying MTT formazan, and information on measuring device: The absorbance at 570 nm (OD570) of each well was measured with a plate reader (Versamax® Molecular Devices, 85737 Ismaning, Germany, Software Softmax Pro, version 4.7.1).
- Description of the method used to quantify MTT formazan: incubation in MTT solution for 180 min, extraction in isopropanol for ca 17 h at 2-8 °C and 2 h at RT with shaking
- Description of evaluation criteria used including the justification for the selection of the cut-off point for the prediction model:
If the test item-treated tissue viability is > 60 % relative to the negative control treated tissue viability, the test item is labeled non-irritant. If the test item-treated tissue viability is ≤ 60 % relative to negative control treated tissue viability, the test item is labeled irritant. A single test composed of at least two tissue replicates should be sufficient for a test chemical, when the result is unequivocal. However, in cases of borderline results, such as non-concordant replicate measurements and/or mean percent tissue viability equal to 60±5 %, a second test should be considered, as well as a third one in case of discordant results between the first two tests.
- Acceptability of assaya:
1) The negative control OD is > 0.8 and < 2.5,
2) The mean relative viability of the positive control is below 50% of the negative control viability.
3) The difference of viability between the two relating tissues of a single test item is < 20% in the same run (for positive and negative control tissues and tissues of test items). - Irritation parameter:
- other: cell viability [%]
- Run / experiment:
- mean
- Value:
- 9
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Remarks:
- 100
- Positive controls validity:
- valid
- Remarks:
- 40
- Remarks on result:
- positive indication of irritation
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: no
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: The negative control OD is > 0.8 and < 2.5 (1.922 and 2.068).
- Acceptance criteria met for positive control: The mean relative viability of the positive control is below 50 % of the negative control viability (40.0 %).
- The difference of viability between the two relating tissues of a single item is < 20 % (values between 0.6 % and 3.3 %) in the same run (for positive and negative control tissues and tissues of single test items). - Interpretation of results:
- Category 2 (irritating to eyes) based on GHS criteria
- Conclusions:
- The test item was possesses an eye irritating potential based on a study conducted according to OECD 492.
- Executive summary:
An in vitro study according to OECD 492 was performed to assess the eye irritation potential of the test item by means of the Human Cornea Model Test. The test item did not prove to be an MTT reducer in the MTT pre-test, and it did not dye water or isopropanol in the colour interference pre-test. Therefore, additional tests with freeze-killed or viable tissues did not have to be performed. Each 50 μL of the test item, the negative control (deionised water) or the positive control (methyl acetate) were applied to each of duplicate tissue for 30 minutes. After treatment with the negative control the absorbance values were well within the required acceptability criterion of OD > 0.8 and < 2.5 thus showing the quality of the tissues. Treatment with the positive control induced a decrease below 50 % compared with the negative control value in the relative absorbance thus ensuring the validity of the test system. The difference of viability between the two relating tissues was < 20 % in the same run (for test item tissues, positive and negative control tissues). Irritating effects were observed following incubation with the test item. Compared with the value of the negative control the relative mean absorption value corresponding to the viability of the tissues decreased below 60 % (9.0 %). In conclusion, it can be stated that in this study and under the experimental conditions reported, the test item possesses an eye irritating potential.
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- weight of evidence
- Study period:
- 2017-09-15
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Version / remarks:
- 9.12.2010
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- July 2013
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Species:
- cattle
- Strain:
- not specified
- Details on test animals or tissues and environmental conditions:
- SOURCE OF COLLECTED EYES
- Source: AB Schlachthof GmbH & Co. KG, 63739 Aschaffenburg, Germany
- Number of animals: not specified
- Characteristics of donor animals: 9 months old
- Storage, temperature and transport conditions of ocular tissue (e.g. transport time, transport media and temperature, and other conditions): stored in HBSS containing 1% (v/v) Penicillin/Streptomycin (100 units/mL penicillin and 100 μg/mL streptomycin); in the cooled slaughter-house until transportation; transport on same morning in Styrofoam box
- Time interval prior to initiating testing: same day
- indication of any existing defects or lesions in ocular tissue samples: eyes with defects were discarded before experiment
- Indication of any antibiotics used: not specified - Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount applied: 0.75 mL - Duration of treatment / exposure:
- 10 min
- Duration of post- treatment incubation (in vitro):
- 2 h
- Number of animals or in vitro replicates:
- 3 each for test substance and positive and negative control
- Details on study design:
- SELECTION AND PREPARATION OF CORNEAS
After check of the of the eyes for defects such as vascularization, pigmentation, opacity and scratches only defect free eyes were further processed. The cornea was carefully removed from the eye using scalpel and rounded scissors. A rim of about 2 mm of tissue (sclera) was left for stability and handling of the isolated cornea. Each isolated cornea was mounted in a specially designed cornea holder according to OECD 437 437, which consists of anterior and posterior compartments, which interface with the epithelial and the endothelial sides of the cornea, respectively. The endothelial side of the cornea was positioned against the sealing ring (O-ring) of the posterior part of the holder. The cornea was gently flattened over the O-ring but stretching was avoided. The anterior part of the holder was positioned on top of the cornea and fixed in place with screws. Both compartments of the holder were filled with incubation medium. The posterior compartment was filled first to return the cornea to its natural convex position. Care was taken to assure that no air bubbles were present within the compartments. For equilibration, the corneae in the holder were incubated in a vertical position for about one hour at 32 ± 1 °C in a water-bath.
QUALITY CHECK OF THE ISOLATED CORNEAS
At the end of the incubation period, the basal opacity was determined. Each cornea with a value of the basal opacity > 7 was discarded.
REMOVAL OF TEST SUBSTANCE
- Number of washing steps after exposure period: 1 (rinsed off from the application side with saline)
- POST-EXPOSURE INCUBATION: 32 ± 1 °C for two hours in a vertical position, followed by a second opacity reading
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity: using opacitometer OP_KiT opacitometer (Electro Design, 63-Riom France)
- Corneal permeability: passage of sodium fluorescein dye measured with the aid of micro plate reader](OD490)
SCORING SYSTEM: In Vitro Irritancy Score (IVIS)
DECISION CRITERIA: The decision criteria as indicated in the TG was used. - Irritation parameter:
- in vitro irritation score
- Run / experiment:
- mean
- Value:
- 0.92
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Remarks:
- 0.53
- Positive controls validity:
- valid
- Remarks:
- 70.24
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: No
DEMONSTRATION OF TECHNICAL PROFICIENCY: not specified
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes
- Acceptance criteria met for positive control: yes
- Range of historical values if different from the ones specified in the test guideline: positive control mean IVIS 88.20 +/- 10.74; negative control mean IVIS 1.0 +/- 0.25 - Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item is not categorized for serious eye damage in the study according to OECD 437.
- Executive summary:
The in vitro study was performed to assess the corneal damage potential of the test item by means of the BCOP assay using fresh bovine corneae.
After a first opacity measurement of the fresh bovine corneae (t0), the neat test item, the positive, and the negative controls were applied to corneae fixed in an incubation chamber in horizontal position for 10 minutes at 32 ± 1 °C. The posterior chamber contained incubation medium. After the incubation phase the test item, the positive, and the negative controls were each rinsed from the corneae. Further, the corneae were incubated for another 120 minutes at 32 ± 1 °C in a vertical position, while the anterior chamber contain incubation medium as well. Afterwards, opacity was measured a second time (t130).
After the opacity measurements permeability of the corneae was determined by measuring spectrophotometrically the transfer of sodium fluorescein after incubation in a horizontal position for 90 minutes at 32 ± 1 °C.
With the negative control (0.9% (w/v) NaCl solution in deionised water) neither an increase of opacity nor permeability of the corneae could be observed.
The positive control (2-Ethoxyethanol) showed clear opacity and distinctive permeability of the corneae corresponding to a classification as serious eye damaging (CLP/EPA/GHS (Cat 1)).
Relative to the negative control, the test item did not cause an increase of the corneal opacity or permeability. The calculated mean in vitro irritancy score was 0.92. According to OECD 437 the test item is not categorized (GHS).
Referenceopen allclose all
Dose Group | Tissue No. | Absorbance 570 nm Well 1 | Absorbance 570 nm Well 2 | Mean Absorbance of 2 Wells | Mean- Absorbance of 2 Wells Blank corrected | Mean Absorbance of 2 Tissues after Blank Correction | Rel. Absorbance [%] Tissue 1 + 2 | Absolute Value of the Difference of the Rel. Absorbances [%] Tissue 1 and 2 | Mean Rel. Absorbance [% of Negative Control] |
Blank | 0.038 | 0.039 | 0.038 | 0 | |||||
Negative Control | 1 | 1.928 | 2.068 | 1.998 | 1.96 | 1.927 | 101.7 | 3.3 | 100 |
2 | 1.922 | 1.946 | 1.934 | 1.895 | 98.3 | ||||
Positive Control | 1 | 0.78 | 0.849 | 0.815 | 0.776 | 0.771 | 40.3 | 0.6 | 40 |
2 | 0.802 | 0.805 | 0.803 | 0.765 | 39.7 | ||||
Test Item | 1 | 0.226 | 0.242 | 0.234 | 0.195 | 0.173 | 10.1 | 2.3 | 9 |
2 | 0.192 | 0.189 | 0.19 | 0.152 | 7.9 |
Results after 10 min treatment time
Test group | Opacity value = Difference (t130-t0) of Opacity | Permeability at 490 nm (OD490) | IVIS | Mean IVIS | Proposed in vitro Irritancy Score | ||
|
| Mean |
| Mean |
|
|
|
Negative control | -1 | -0.33 | 0.05 | 0.058 | -0.25 | 0.53 | No Category |
0 | 0.07 | 1.05 | |||||
0 | 0.053 | 0.8 | |||||
Positive control | 49.33 | 1.323 | 69.18 | 70.24 | Category 1 | ||
53.33 | 1.296 | 72.78 | |||||
53.33 | 1.028 | 68.76 | |||||
Test item | -0.67 | 0.087 | 0.64 | 0.92 | No Category | ||
0.33 | 0.09 | 1.69 | |||||
-0.67 | 0.073 | 0.43 |
Opacity and permeability values of positive control and the test substance are shown as corrected values.
Endpoint conclusion
- Endpoint conclusion:
- adverse effect observed (irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin irritation
The in vitro study was performed to assess the irritation potential of the test item by means of the Human Skin Model Test. The colourless test item did not change colour when mixed with deionised water (pre-test for colour interference). An additional test with viable tissues (without MTT addition) was not necessary. In the pre-test for direct MTT reduction a few very weak purple coloured oily drops were observed indicating a slight MTT reducing potential of the test item. Since the reaction was extremely poor, it was relinquished to perform an additional test with freezekilled tissues to determine a correction factor for calculating the true viability in the main experiment. Each three tissues of the human skin model EpiDerm™ were treated with the test item, the negative control (DPBS) or the positive control (5% SLS) for 60 minutes. After treatment with the negative control the absorbance values were well within the required range of the acceptability criterion of mean OD ≥ 0.8 and ≤ 2.8 for the 60 minutes treatment interval, thus assuring the quality of the tissues. Treatment with the positive control induced a sufficient decrease in the relative absorbance as compared to the negative control for the 60 minutes treatment interval, and thus assuring the validity of the test system. After treatment with the test item BIO4307/2 the mean relative absorbance value decreased to 81.8 % compared to the relative absorbance value of the negative control. This value is above the threshold for irritancy of ≤ 50%. Therefore, the test item is not considered to possess an irritant potential. In conclusion, it can be stated that in this study and under the experimental conditions reported, the test item is not irritant to skin.
Eye irritation
A weight of evidence approach was used to determine the potential of the test item to induce eye irritation or seriouse eye damage. Therefore, studies according to OECD 492 and 437 were conduced.
An in vitro study according to OECD 492 was performed to assess the eye irritation potential of the test item by means of the Human Cornea Model Test. The test item did not prove to be an MTT reducer in the MTT pre-test, and it did not dye water or isopropanol in the colour interference pre-test. Therefore, additional tests with freeze-killed or viable tissues did not have to be performed. Each 50 μL of the test item, the negative control (deionised water) or the positive control (methyl acetate) were applied to each of duplicate tissue for 30 minutes. After treatment with the negative control the absorbance values were well within the required acceptability criterion of OD > 0.8 and < 2.5 thus showing the quality of the tissues. Treatment with the positive control induced a decrease below 50 % compared with the negative control value in the relative absorbance thus ensuring the validity of the test system. The difference of viability between the two relating tissues was < 20 % in the same run (for test item tissues, positive and negative control tissues). Irritating effects were observed following incubation with the test item. Compared with the value of the negative control the relative mean absorption value corresponding to the viability of the tissues decreased below 60 % (9.0 %). In conclusion, it can be stated that in this study and under the experimental conditions reported, the test item possesses an eye irritating potential.
The in vitro study was performed to assess the corneal damage potential of the test item by means of the BCOP assay using fresh bovine corneae.
After a first opacity measurement of the fresh bovine corneae (t0), the neat test item, the positive, and the negative controls were applied to corneae fixed in an incubation chamber in horizontal position for 10 minutes at 32 ± 1 °C. The posterior chamber contained incubation medium. After the incubation phase the test item, the positive, and the negative controls were each rinsed from the corneae. Further, the corneae were incubated for another 120 minutes at 32 ± 1 °C in a vertical position, while the anterior chamber contain incubation medium as well. Afterwards, opacity was measured a second time (t130).
After the opacity measurements permeability of the corneae was determined by measuring spectrophotometrically the transfer of sodium fluorescein after incubation in a horizontal position for 90 minutes at 32 ± 1 °C.
With the negative control (0.9% (w/v) NaCl solution in deionised water) neither an increase of opacity nor permeability of the corneae could be observed.
The positive control (2-Ethoxyethanol) showed clear opacity and distinctive permeability of the corneae corresponding to a classification as serious eye damaging (CLP/EPA/GHS (Cat 1)).
Relative to the negative control, the test item did not cause an increase of the corneal opacity or permeability. The calculated mean in vitro irritancy score was 0.92. According to OECD 437 the test item is not categorized (GHS).
The weight of evidence shows that the test item possesses eye irritation potential (OECD 492) but no potential do induce seriouse eye damage (OECD 437).
Justification for classification or non-classification
Classification, Labelling, and Packaging Regulation (EC) No 1272/2008
Based on available data on skin irritation/corrosion, the test item is not classified according to Regulation (EC) No 1272/2008 (CLP), as amended for the fifteenth time in Regulation (EU) No 2020/1182.
Based on available data on eye irritation/serious eye damage, the test item is classified as causing eye irritation (Cat. 2, H319: Causes serious eye irritation) according to Regulation (EC) No 1272/2008 (CLP), as amended for the fourteenth time in Regulation (EU) 2020/217.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.