Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 944-886-5 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- December 11th to January 17th, 2019
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2019
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- adopted June 25th, 2018
- Deviations:
- no
- Principles of method if other than guideline:
- Additional information was taken from:
- MatTek Protocol: EpiOcularTM Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals, for use with MatTek Corporation’s Reconstructed Human EpiOcularTM Model, 14. July 2014
- Stern M., Klausner M., Alvarado R., Renskers K., Dickens M., 1998. “Evaluation of the EpiOcular Tissue Model as an Alternative to the Draize Eye Irritation Test”. Toxi-cology in Vitro 12, 455-461 - GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Calcium magnesium strontium carbonate hydroxide phosphate (4.3-4.7 : 0.1-0.3: 0.2-0.5 : 0.3-0.5 : 0.2-0.6 : 3)
- EC Number:
- 944-886-5
- Molecular formula:
- Ca4.3-4.7Mg0.1-0.3Sr0.2-0.5(PO4)3(CO3)0.3-0.5(OH)0.2-0.6
- IUPAC Name:
- Calcium magnesium strontium carbonate hydroxide phosphate (4.3-4.7 : 0.1-0.3: 0.2-0.5 : 0.3-0.5 : 0.2-0.6 : 3)
Constituent 1
Test animals / tissue source
- Species:
- human
- Details on test animals or tissues and environmental conditions:
- - Description of the cell system used: the EpiOcularTM tissue consists of normal, human-derived keratinocytes which have been cultured to form a stratified squamous epithelium similar to that found in the human cornea. It consists of highly organized basal cells. These cells are not transformed or transfected with genes to induce an extended life span. The EpiOcularTM tissues are cul-tured in specially prepared cell culture inserts with a porous membrane through which nutrients can pass to the cells. The tissue surface is 0.6 cm2
Test system
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amounts applied: main test: 52.3 mg (tissue 1), 51.6 mg (tissue 2) - additional test: 52.3 mg (tissue 1), 54.1 mg (tissue 2)
POSITIVE AND NEGATIVE CONTROLS
- Amount applied: 50 μl. - Duration of treatment / exposure:
- 6 hours
- Duration of post- treatment incubation (in vitro):
- 17 hours and 45 minutes (main test)
18 hours and 15 minutes (additional test) - Number of animals or in vitro replicates:
- two
- Details on study design:
- CHEMICALS AND MEDIA
- MTT solution: 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide (=MTT), which can be reduced to a blue formazan. A MTT stock solution of 5 mg/ml in DPBS buffer was prepared and stored in aliquots of 2 ml at – 20 ± 5 °C. 2 ml of the stock solution were thawed and diluted with 8 ml of assay medium (resulting in 1 mg/ml). This MTT-solution with the concentration of 1 mg/ml was used in the test. For the pre-test (testing the ability of direct MTT reduction), the stock solution was thawed and diluted with serum-free MEM directly before use. For the main test, the stock solution was thawed and diluted with assay medium directly before use.
- DPBS-Buffer - “Dulbecco`s Phosphate Buffered Saline” (DPBS) was used for the rinsing of the tissues. Composition: KCl 0.2 g, KH2PO4 0.2 g, NaCl 8.0 g, Na2HPO4 * 7H2O 2.16 g, H2O ad 1 litre and Composition: KCl 0.2 g, KH2PO4 0.2 g, NaCl 8.0 g, Na2HPO4 * 2H2O 1.44 g, H2O ad 1 litre. The first buffer was used for rinsing the test item from the tissues. The second buffer was only used for preparing the MTT concentrate.
- MEM with Phenol Red for Pre-Test Serum-free MEM (Minimum Essential Medium)
- Assay Medium for Main Test Serum-free DMEM (Dulbecco’s Modified Eagle’s Medium)
PRE-TESTS
- Assessment of Direct Reduction of MTT by the Test Item: the test item was tested for the ability of direct MTT reduction. To test for this ability, 53.9 mg of the solid test item were added to 1 ml of MTT solution in a 6-well plate and the mixture was incubated in the dark at 37 ± 1 °C, 5.0 ± 1 % CO2 and ≥ 95% relative humidity for 3 hours. 1 ml of MTT solution plus 50 µl of H2O demin. was used as negative control. The MTT solution did not change its colour; therefore, direct MTT reduction had not taken place, and no data correction was necessary.
- Assessment of Coloured or Staining Test Items: 52.5 mg of the test item were added to 2 ml isopropanol, incubated in 6-well plates on an orbital shaker for 3 hours at room temperature. The test item mixture was not soluble and precipitates were visible. For this reason, 1 ml of the mixture was centrifuged for 30 seconds at 16000 * g. Then, two 200 µl aliquots of the supernatant and two 200 µl aliquots of neat isopropanol were transferred into a 96-well plate and measured with a plate reader at 570 nm. After subtraction of the mean OD for isopropanol, the mean OD of the test item solution was 0.556 (>0.08). The test item was is possibly interacting with the photometrical meas-urement and an additional test on colourant controls was performed. The additional test was performed in order to evaluate the amount of colour bound to the tissues. The test item was applied to two additional tissues (= colourant controls) and the test was performed in the same way as described for the main study, but no MTT assay was performed: instead of 300 µl MTT solution, 300 µl assay medium with phenol red was used. The bound colour was extracted and the absorbance of the isopropanol extract was measured in the same fashion as in the MTT assay for coloured test items (without piercing the tissues). A non-specific colour in living tissues (NSCliving) control was generated in this case. True tissue viability was calculated as: the percent tissue viability obtained with living tis-sues exposed to the interfering test chemical and incubated with MTT solution (%Viabil-itytest) minus the percent non-specific colour obtained with living tissues exposed to the interfering test chemical and incubated with medium without MTT, run concurrently to the test being corrected (%NSCliving), i.e., True tissue viability = [%Viabilitytest] - [%NSCliving]. As the colourant control result was ≤ 50 % of the viable negative control, a data correction procedure was performed.
MAIN TEST
- Preparations: on the day of the start of the experiment, the MTT concentrate was thawed. The MTT con-centrate was diluted with assay medium directly before use. The assay medium was warmed in the water bath to 37 ± 1°C. 6-well-plates were labelled with test item, negative control and positive control and filled with 1 ml assay medium in the appropriate wells. All inserts were inspected for viability and the presence of air bubbles between agarose gel and insert. Viable tissues were transferred in the prepared 6-well-plate and incubated at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity for 1 hour. After the pre-incubation, the medium was replaced and the wells were filled with 1 ml fresh assay medium. All 6-well-plates were incubated at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity for 16 hours and 29 minutes.
- Exposure and Post-Treatment: after overnight incubation, the tissues were pre-wetted with 20 µl Ca2+/Mg2+ -free DPBS buffer and the tissues were incubated at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative hu-midity for 29 minutes. After that, 50 µl of the controls and a defined amount of the test item were applied in duplicate in one- minute- intervals.
At the beginning of each experiment (application of negative controls), a stop watch was started. After dosing the last tissue, all plates were transferred into the incubator for 6 hours at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity. At the end of exposure time, the inserts were removed from the plates in one-minute-intervals using sterile forceps and rinsed immediately. The inserts were thoroughly rinsed (at least three times) with Ca2+/Mg2+ -free DPBS. Then, the tissues were immediately transferred into 5 ml of assay medium in pre-labelled 12-well plate for 25 minutes (main test) and 24 minutes (additional test) post soak at room temperature. After that, each insert was blotted on absorbent material and transferred into a pre-labelled 6-well plate, containing 1 mL assay medium. For post-treatment incubation, the tissues were incubated for 17 hours and 45 minutes (main test) and 18 hours and 15 minutes (additional test) at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity. After the post-treatment incubation, the MTT assay was performed.
- MTT Assay and Extraction: a 24-well-plate was prepared with 300 µl freshly prepared MTT solution in each well. The tissue inserts were blotted on absorbent material and then transferred into the MTT solution. The plate was incubated for 180 minutes at 37 ± 1 °C, 5 ± 1 % CO2 and ≥ 95% relative humidity. At last, each insert was thoroughly dried and set into a pre-labelled 6-well-plate, containing 2 ml isopropanol, taking care that no isopropanol was flowing into the tissue insert. The plate was firmly sealed to avoid evaporation of the solvent and then shaken for 2 hours at room temperature, protected from light.
- Measurement: the inserts were removed from the 6-well plate and discarded. The content of each well was thoroughly mixed in order to achieve homogenisation. From each well, two replicates with 200 µl solution (each) were pipetted into a 96-well-plate. Eight wells with 200 µl isopropanol were pipetted also. The plates were read in a plate spectrophotometer at 570 nm.
- Demonstration of the proficiency: the validity of the EpiOcularTM test was demonstrated in a proficiency study. For this purpose, 15 proficiency chemicals (indicated by the OECD 492 guideline) were tested. All of the 15 proficiency chemicals were correctly categorized. Therefore, the proficiency of the EpiOcularTM test was demonstrated.
EVALUATION CRITERIA
- % Viability > 60 %: no category
- % Viability ≤ 60 %: no prediction can be made (category 1 or 2)
Results and discussion
In vitro
Results
- Irritation parameter:
- other: tissue viability %
- Value:
- 90.7
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: OD found 1.7 (main test, additional test), demanded: >0.8 and < 2.5
- Acceptance criteria met for positive control: % mean relative viability of positive control 42.7 % (main test), demanded < 50 % of negative control
- Variation within replicates: 1.3 % (negative control-main test),1.6 % (negative control-additional test) 5.9 % (positive control), 11.8 % (test item, main test), 0.4 % (test item, additional test) demanded < 20 %
- Range of historical values if different from the ones specified in the test guideline: values for negative control and for positive control were within the range of historical data of the test facility
Any other information on results incl. tables
MEASURED VALUES - MAIN TEST
As blank, the optical density of isopropanol was measured in eight wells of the 96-wellplate. The measured values and their mean are given in the following table:
Table: Absorbance Values Blank Isopropanol (OD at 570 nm)
Replicate | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Mean |
Absorbance | 0.032 | 0.033 | 0.033 | 0.033 | 0.034 | 0.033 | 0.033 | 0.033 | 0.033 |
The absorbance values of negative control, test item and positive control are given in the following table:
Table: Absorbance Values Negative Control, Positive Control and Test Item (OD at 570 nm)
Designation | Measurement | Negative Control |
Positive control | Test material |
Tissue 1 | 1 | 1.777 | 0.819 | 1.697 |
2 | 1.762 | 0.820 | 1.714 | |
Tissue 2 | 1 | 1.756 | 0.721 | 1.502 |
2 | 1.738 | 0.716 | 1.503 |
From the measured absorbances, the mean of each tissue was calculated, subtracting the mean absorbance of isopropanol(= corrected values).
Table: Mean Absorbance Negative Control, Positive Control and Test Item
Designation | Negative control | Positive control | Test material |
Mean – blank (tissue 1) | 1.737 | 0.787 | 1.673 |
Mean – blank (tissue 2) | 1.714 | 0.686 | 1.470 |
For the test item and the positive control, the following percentage values of tissue viability were calculated in comparison to the negative control:
Table: % Viability Positive Control and Test Item
Designation | Positive control | Test material |
% Viability (tissue 1) | 45.6 | 97.0 |
% Viability (tissue 2) | 39.7 | 85.2 |
% Viability Mean | 42.7 | 91.1 |
MEASURED VALUES- ADDITIONAL TEST FOR COLOURED TEST ITEMS
As blank, the optical density of isopropanol was measured in eight wells of the 96-wellplate. The measured values and their mean are given in the following table:
Table: Absorbance Values Blank Isopropanol (OD at 570 nm)
Replicate | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Mean |
Absorbance | 0.033 | 0.032 | 0.032 | 0.033 | 0.033 | 0.033 | 0.033 | 0.033 | 0.033 |
The absorbance values of negative control and test item are given in the following table:
Table: Absorbance Values Negative Control and Test Item (OD at 570 nm)
Designation | Measurement | Negative Control |
Test material |
Tissue 1 | 1 | 1.767 | 0.036 |
2 | 1.715 | 0.036 | |
Tissue 2 | 1 | 1.714 | 0.043 |
2 | 1.715 | 0.043 |
From the measured absorbances, the mean of each tissue was calculated, subtracting the mean absorbance of isopropanol (= corrected values).
Table: Mean Absorbance Negative Control and Test Item
Designation | Negative control | Test material |
Mean – blank (tissue 1) | 1.708 | 0.003 |
Mean – blank (tissue 2) | 1.682 | 0.010 |
Comparison of Tissue Viability (Additional Test for Coloured Test Items) For the test item, the following percentage values of mean tissue viability were calculated in comparison to the mean of the negative control:
Table: % Tissue Viability
Designation | Test material |
% Viability (tissue 1) | 0.2 |
% Viability (tissue 2) | 0.6 |
% Viability Mean |
0.4 |
% Viability mean main test: 91.1 %
% Viability mean colourant control of additional test: -0.4 %
% Viability corrected: 90.7 %
Applicant's summary and conclusion
- Interpretation of results:
- other: not classified as eye irritant according to the CLP Regulation (EC) No.1272/2008
- Conclusions:
- Non eye irritant
- Executive summary:
The eye hazard potential of the test material was evaluated according to the OECD 492 in a Reconstructed human Cornea-like Epithelium (RhCE) model in an in vitro study. The test item was applied to a three-dimensional human cornea tissue model in duplicate for an exposure time of 6 hours. After treatment, the respective substance was rinsed from the tissue; then, cell viability of the tissues was evaluated by addition of MTT, which can be reduced to formazan. The formazan production was evaluated by measuring the optical density (OD) of the resulting solution. Demineralised water was used as negative control and methyl acetate was used as positive control. As the test item showed intense coloring in the pre-test, there was the risk to influence the photometric measurement. Therefore, an additional test for intensely coloured test items was performed. The result of the additional test showed, that the test item colour did not influence the result of the study.
The controls showed the following results: after treatment with the test item, the mean value of relative tissue viability was reduced to 90.7%. This value is above the threshold for eye irritation potential (≤ 60 %). All validity criteria were met. The criterion for optical density of the negative control was fulfilled: The OD value was 1.7 (> 0.8 and < 2.5). The positive control induced a decrease in tissue viability as compared to the negative control to 42.7 %. Variation within the replicates of the controls and the test item was acceptable (< 20 %).
This value is well above the threshold for eye irritation potential (≤ 60 %). Test items that induce values above the threshold are considered non-eye irritant. Under the conditions of the test, the substance is considered non- eye irritant in the EpiOcularTM Eye Irritation Test.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.