Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 934-405-7 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water: screening tests
Administrative data
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
- Version / remarks:
- 1992
- Deviations:
- no
- GLP compliance:
- yes
Test material
- Test material form:
- solid: particulate/powder
Constituent 1
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material:070602
- Purity: 92.7% w/w
- Carbon content: 27%
- Expiration date: 6 June 2019
- Purity test date: 31 July 2017
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: The test item is very hygroscopic, it should be stored in the closed original container.
TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: the test item is used via stock solution.
Study design
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge, domestic (adaptation not specified)
- Details on inoculum:
- - Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure): Activated sludge, predominantly municipal wastewater treatment plant AZV Staufener Bucht, 30 mg dry solids per litre
- Storage length: 2 days
- Preparation of inoculum for exposure: washed twice with tap water by settling the sludge, decanting the supernatant and re-suspending the sludge.
- Concentration of sludge: 9.6 ml in 1500 ml of mineral medium corresponding to 30 mg/l dry solids
- Initial cell/biomass concentration: initial dry solid content: 4.7 g/l (mean of 3 measurements) - Duration of test (contact time):
- 28 d
Initial test substance concentration
- Initial conc.:
- 10 g/L
- Based on:
- TOC
Parameter followed for biodegradation estimation
- Parameter followed for biodegradation estimation:
- CO2 evolution
- Details on study design:
- TEST CONDITIONS
- Composition of medium:
A: Potassium dihydrogenphosphate KH2PO4 8.50 g
Dipotassium hydrogenphosphate K2HPO4 21.75 g
Disodium hydrogenphosphate dihydrate Na2HPO4 * 2 H2O 33.40 g
Ammonium chloride NH4Cl 0.50 g
are dissolved in demineralised water and made up to 1 litre.
B: Calcium chloride dihydrate CaCl2 * 2H2O 36.4 g
is dissolved in demineralised water and made up to 1 litre.
C: Magnesium sulfate heptahydrate MgSO4 * 7H2O 22.5 g
is dissolved in demineralised water and made up to 1 litre.
D: Iron (III) chloride hexahydrate FeCl3 * 6H2O 0.25 g
is dissolved in demineralised water, stabilised with one drop of concentrated HCl and made up to 1 litre.
For preparation of the mineral medium 10 mL of solution (A) is mixed with 900 mL demineralised water, 1 mL each of solutions (B), (C) and (D) are added and the volume is made up to 1 litre.
- Additional substrate:
CO2-absorption medium: 64.09 g NaOH was dissolved in 8000 mL deionised water in closed vessels (0.2 M NaOH). The inorganic carbon concentration of the 0.2 M NaOH was determined (IC = 3.229 mg/L).
- Solubilising agent (type and concentration if used): water
- Test temperature: 20.2 – 22.2°C
- Aeration rate: 1-100 ml/min (1.6 – 5.5 bubbles/s)
- Suspended solids concentration: activated sludge, 45 mg/1500 ml
- Continuous darkness: no diffuse light
- Other:
TEST SYSTEM
- Culturing apparatus: reactor (2000 ml) gas wash flasks with GL14 hole-caps and frit pipes
- Number of culture flasks/concentration: 3
- Method used to create aerobic conditions: CO2-free air compressor and a raw of air-tubes (air distributor) with 2 input and 22 output channels, with a specific aeration rate, and through PE-tubes.
- Measuring equipment: inorganic carbon (IC) measurement with a total carbon analyser (TOC-L, Shimadzu) by purging the inorganic carbon with H3PO4 (25%) using a non-dispersive infrared (NDIR) detector.
- Test performed in closed vessels due to significant volatility of test substance: YES Gas wash bottle (2000 ml) with lateral connecting pieces for butyl rubber septa
- Details of trap for CO2 and volatile organics if used:
CO2 trapping for the CO2-free air production: three 1000 mL gas wash bottles filled with dry soda lime in series followed by one bottle filled with 0.1 M NaOH (sodium hydroxide). At the end of the system is one gas wash bottle filled with demineralised water, followed by an empty one to catch any drops of condensation water. A color change of the soda lime from white to blue indicates that the CO2 absorption capacity is depleted.
CO2 trapping during experiments: 2 250 ml gas wash bottles in series each filled with 200ml 0.2 M NaOH.
- Other:
SAMPLING
- Sampling frequency: before the experimentation D0, D4, D7, D11, D14, D21 and D28
- Sampling method: through the butyl rubber septum with a 5 ml PE syringe
- Sample storage before analysis: immediately closed with sealing film
CONTROL AND BLANK SYSTEM
- Inoculum blank: 3 reactors
- Abiotic control: 3 reactors with the reference compound
- Toxicity control: 1 reactor with the test system + the reference compound (corresponding to a concentration of 40 mg/L organic carbon)
Reference substance
- Reference substance:
- benzoic acid, sodium salt
Results and discussion
- Preliminary study:
- None
- Test performance:
- The degradation extent in the toxicity control was 41.5% within 14 days. Hence, the test item had no inhibitory effect on the inoculum at the test concentration of 40 mg TOC/L
% Degradation
- Key result
- Parameter:
- % degradation (CO2 evolution)
- Value:
- -5.9
- St. dev.:
- 1.5
- Sampling time:
- 28 d
- Details on results:
- One hypothesis for the negative result is a problem of CO2 absorption by the test item itself.
Any other information on results incl. tables
Ultimate biodegradation after X days [% of ThCO2]
reactor | day | 0 | 4 | 7 | 11 | 14 | 21 | 28 | 28 (incl. IC dissolved in reactor) |
11 | Test flasks | 0 | -2.6 | -4.4 | -5.9 | -6.4 | -7.5 | -8.2 | -8.0 |
12 | Test flasks | 0 | -1.0 | -1.9 | -3.6 | -4.0 | -4.6 | -4.8 | -4.9 |
13 | Test flasks | 0 | -0.7 | -1.9 | -3.1 | -3.7 | -4.0 | -4.8 | -4.8 |
mean value test flasks | 0.0 | -1.4 | -2.7 | -4.2 | -4.7 | -5.4 | -5.9 | -5.9 | |
standard deviation | 0.0 | 0.8 | 1.2 | 1.2 | 1.2 | 1.5 | 1.6 | 1.5 | |
4 | reference flasks | 0 | 70.6 | 83.7 | 84.8 | 86.7 | 87.3 | 90.3 | 90.9 |
5 | reference flasks | 0 | 73.1 | 84.0 | 86.2 | 87.9 | 88.1 | 89.1 | 89.5 |
6 | reference flasks | 0 | 75.6 | 86.9 | 87.7 | 88.8 | 90.1 | 90.0 | 91.0 |
mean value refrence flasks | 0.0 | 73.1 | 84.9 | 86.2 | 87.8 | 88.5 | 89.8 | 90.5 | |
standard deviation | 0.0 | 2.0 | 1.5 | 1.2 | 0.8 | 1.2 | 0.5 | 0.7 | |
14 | toxicity control test item reference item | 0 | 35.8 | 39.3 | 40.7 | 41.6 | 43.0 | 42.5 | 42.6 |
Mean CO2 -evolution of blank flasks (1 -3) after x days:
Day | 0 | 4 | 7 | 11 | 14 | 21 | 28 | 28 (incl. IC dissolved in reactor) |
CO2 -evolution [mg/l] | 0 | 7.5 | 10.3 | 13.2 | 14.8 | 18.6 | 22.1 | 23.4 |
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Interpretation of results:
- under test conditions no biodegradation observed
- Conclusions:
- There was no degradation of the test item observed during the test duration. The degradation extent of the test item at the end of the test was -5.6% (mean of three replicates, see table 1 and figure 1).
Therefore the test item did not reach the criteria for ready biodegradability (60% of ThCO2 within a 10-day window).
The degradation extent in the toxicity control was 41.5% within 14 days (see table 1). Hence, the test item had no inhibitory effect on the inoculum at the test concentration of 40 mg TOC/L. - Executive summary:
The biodegradability of “X330” was tested in the CO2 Evolution Test according to OECD 301 B (July 1992). The test item was added via stock solution (10 g/l in water) inoculated with activated sludge, municipal wastewater treatment plant AZV Staufener Bucht, 30 mg dry solids per litre during 28 days. Degradation is followed by determining the carbon dioxide produced and absorbed to sodium hydroxide via IC-measurement (IC = inorganic carbon). The amount of carbon dioxide produced from the test item less the amount derived from the blank inoculum is expressed as a percentage of ThCO2 (theoretical amount of CO2). The pass level for ready biodegradability is 60% of ThCO2 and must be reached within a 10-d window. The 10-d window begins when the degree of biodegradation reaches 10%.
There was no degradation of the test item observed during the test duration. The degradation extent of the test item at the end of the test was -5.6% (mean of three replicates, see table 1 and figure 1).
Therefore the test item did not reach the criteria for ready biodegradability (60% of ThCO2 within a 10-day window).
The degradation extent in the toxicity control was 41.5% within 14 days (see table 1). Hence, the test item had no inhibitory effect on the inoculum at the test concentration of 40 mg TOC/L.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)
Deși ECHA oferă o varietate bogată de materiale online în limba dumneavoastră, o parte din conţinutul acestei pagini este disponibil numai în limba engleză. Pentru mai multe informaţii referitoare la practica multilingvă a ECHA.
Bun venit pe site-ul ECHA. Acest site nu este deplin acceptat în Internet Explorer 7 (și versiuni anterioare). Vă rugăm să vă actualizați versiunea de Internet Explorer.
Acest site folosește module cookie pentru a garanta că aveți parte de cea mai bună experiență pe paginile noastre.
Aflați mai multe despre cum folosim modulele cookie.