Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 946-364-2 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2015-04-01 - 2015-04-15
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Guidline study in compliance with GLP
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.19 (Estimation of the Adsorption Coefficient (KOC) on Soil and Sewage Sludge Using High Performance Liquid Chromatography (HPLC))
- Version / remarks:
- of 2008-05-30
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC))
- Version / remarks:
- of 2001-01-22
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- The Department of Health of the Government of the United Kingdom
- Type of method:
- HPLC estimation method
- Media:
- soil/sewage sludge
- Radiolabelling:
- not specified
- Test temperature:
- 30 °C
- Details on study design: HPLC method:
- Solutions of reference standards (Table 3.1) were prepared in methanol.
The dead time was determined by measuring the retention time of formamide (purity*: 99.94%) at 628 mg/L in methanol:water (55:45 v/v).
* value quoted by supplier
Test item (0.1018 g) was diluted to 10 mL with tetrahydrofuran.
The sample, dead time and reference standard solutions were injected in duplicate using the following high performance liquid chromatography (HPLC) parameters:
HPLC System: Agilent Technologies 1200, incorporating workstation and autosampler
Detectors: Agilent variable wavelength detector (VWD) and Polymer Laboratories evaporative light scattering detector 2100 (ELSD)
Column: Water XSelect CN 5 micrometer (150 x 4.6 mm id)
Column temperature: 30 °C
Flow-rate: 1.0 mL/min
Mobile phase: methanol : purified water (55 : 45 v/v)
pH of mobile phase 5.9
Injection volume: 5 microliter
UV detector wavelength (dead time and reference standarts): 210 nm
ELSD parameters (sample): nebuliser temperature: 40 °C
evaporater temperature: 80 °C
gas flow: 1.0 L/min
The mobile phase was ramped to 100% propan-2-ol shortly after the elution of the last reference standard to elute the highly retained test item components. This was carried out for the sample and sample blank injections only.
The capacity factors were determined using the following equation:
k' = ((tr - t0) / (t0))
where: k' = capacity factor
tr = retention time (min)
t0 = dead time (min)
Construction of the calibration curve:
A correlation of log10 k' versus log10 Koc of the calibration standards was plotted using linear regression (Figure 3.1). The capacity factor (k') for the reference standards was calculated from the retention time data of the dead time and reference standard solutions using Equation 3.1. Log10 Koc values of the reference standards are those quoted in OECD Method 121.
Adsorption Coefficient:
The capacity factor of the test item was calculated using Equation above. The Log10 Koc value was calculated using Equation below with reference to the calibration curve (Figure 3.1)
Log10 Koc = ((Log 10 k' - A) / (B))
where: Koc = adsorption coefficient
k' = capacity factor
A = intercept of the calibration curve (Figure 3.1)
B = slope ot the calibration curve (Figure 3.1) - Analytical monitoring:
- not required
- Key result
- Type:
- Koc
- Value:
- > 427 000 dimensionless
- Key result
- Type:
- log Koc
- Value:
- > 5.63 dimensionless
- Details on results (HPLC method):
- Typical Chromatography is shown for Dead time, Reference Standard - Diclofop Methyl and the Sample.
The retention times of the dead time and the retention times, capacity factors and log10 Koc values for the reference standards are shown in Table 3.2 and Table 3.3.
Calibration Curve is shon in Figure 3.1.
The retention times, capacity factor and log10 Koc value determined for the sample are shown in Table 3.4.
The mobile phase's pH was unadjusted as the majority of the components of the test item (products >95%) had no dissociation constant with in the environmentally relevant pH range so they were tested in their non-ionized form. A number of peaks, mostly small, were observed in the sample chromatography which represented other components within the test item but were not included in the test result as they were considered insignificant with respect to the test item as a whole. One of these peaks, occurring at approximately 0.8 minutes, was significant in its peak area but even so, it was not included as part of the overall test result. This was because, the Sponsor's information on the test item detailed water soluble inorganic salts which could explain the peak eluting before the dead time. Also, it explains that although the salt's abundance is not significant its peak area is. This is because the ELSD can have significant sensitivity to nonvolatile inorganic salt. - Adsorption and desorption constants:
- not required
- Validity criteria fulfilled:
- not specified
- Conclusions:
- The adsorption coefficient of the test item has been determined to be greater than 4.27 x 10E5, log10 Koc >5.63, for more than 95% of the test item.
- Executive summary:
This study estimates the adsorbtion coefficient ot the test item: Greater than 4.27 x 10E5, log10 Koc >5.63, for more than 95% of the test item, using the HPLC screening method, designed to be compatible with C 19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 ofthe OECD Guidelines for Testing of Chemicals, 22 January 2001.
Reference
Table 3.2:
Dead Time | Retention Time (mins) | Mean Retention Time (mins) | |
Injection 1 | Injection 2 | ||
Formamide | 1.921 | 1.924 | 1.923 |
Table 3.3:
Standard | Retention Time (mins) | Mean Retention Time (mins) | Capacity Factor (k') | Log10k' | Log 10 Koc | |
Injection 1 | Injection 2 | |||||
Acetanilide | 2.623 | 2.623 | 2.623 | 0.364 | -0.439 | 1.25 |
Atrazine | 3.598 | 3.600 | 3.599 | 0.872 | -5.95 x 10-2 | 1.81 |
Isoproturon | 3.836 | 3.833 | 3.834 | 0.994 | -2.47 x 10-3 | 1.86 |
Triadimenol | 5.085 | 5.087 | 5.086 | 1.65 | 0.216 | 2.40 |
Linuron | 5.199 | 5.201 | 5.200 | 1.71 | 0.232 | 2.59 |
Naphthalene | 4.529 | 4.527 | 4.528 | 1.36 | 0.132 | 2.75 |
Endosulfan-diol | 6.354 | 6.361 | 6.357 | 2.31 | 0.363 | 3.02 |
Fenthion | 7.598 | 7.613 | 7.606 | 2.96 | 0.471 | 3.31 |
cc-Endosulfan | 10.670 | 10.679 | 10.674 | 4.55 | 0.658 | 4.09 |
Diclofop-methyl | 11.492 | 11.487 | 11.490 | 4.98 | 0.697 | 4.20 |
Phenanthrene | 8.290 | 8.292 | 8.291 | 3.31 | 0.520 | 4.09 |
DDT | 22.307 | 22.312 | 22.310 | 10.6 | 1.03 | 5.63 |
Table 3.4:
Injection | Retention Time (mins) | Capacity Factor (k') | Log10k' | Log10Koc | Mean Log10Koc | Adsorption Coefficient |
1 | >=34.577 | >10.6 | >1.03 | >5.63 | >5.63 | >4.27x 105 |
2 | >=34.550 | >10.6 | >1.03 | >5.63 |
Description of key information
This study estimates the adsorbtion coefficient ot the test item: Greater than 4.27 x 10E5, log10 Koc >5.63, for more than 95% of the test item, using the HPLC screening method, designed to be compatible with C 19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
Key value for chemical safety assessment
- Koc at 20 °C:
- 427 000
Additional information
Key values for chemical safety assessment are not at 20 °C, but at 30 °C, because of the HPLC-method and the values are greater than the inscribed estimated values!
An additional QSAR calculation was performed.
The prediction for soil adsorption property of the substance D-glucopyranoside methyl 2,6 -dioleate was determined by the computer program KOCWIN v2.00 (EPIWIN software) by US-EPA (Chemservice S.A., 2017). The program estimates the organic-normalized sorption coefficient for soil, which is designated as Koc. The following two models are used: the Salbjic molecular connectivity (MCI) method as well as the traditional method which is based on the logPow value of the substance. The MCI method is taken more seriously into account, due to the fact that is includes improved correction factors, resulting a Koc value of 4.238E6 L/kg. The traditional method gives a value of 3512 L/kg.
[LogKoc: 5.63]
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.