Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

If inhaled: Fresh air.

On skin contact: Wash affected areas thoroughly with soap and water.

On contact with eyes: In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention if necessary.

On ingestion: Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention. If swallowed, seek medical advice immediately and show this container or label.

Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

1. Extinguishing media
Suitable extinguishing media:
dry powder, alcohol-resistant foam
2. Special hazards arising from the substance or mixture
harmful vapours
The product is combustible. Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
3. Advice for fire-fighters
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. Keep containers cool by spraying with water if exposed to fire.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work. Handle in accordance with good industrial hygiene and safety practice
2. Environmental precautions
Do not discharge into drains/surface waters/groundwater.
3. Methods and material for containment and cleaning up
For small amounts: Pick up with suitable absorbent material.

For large amounts: Dike spillage. Cover with blanket of foam (alcohol-resistant foam). Pump off product.
Dispose of absorbed material in accordance with regulations.

Handling and storage

1. Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice.
Protection against fire and explosion:
The product is combustible. Vapours may form explosive mixture with air. Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame. If exposed to fire, keep containers cool by spraying with water.
2. Conditions for safe storage, including any incompatibilities
Suitable materials for containers: carbon steel (iron)
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place. Protect containers from physical damage.
Storage stability:
Storage temperature: <= 30 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not classified as a dangerous good under transport regulations except ADN bulk transport in inland waterway vessel

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Not needed.
Hand protection:

Suitable are protective gloves with the following specification. The recommendation is valid for laboratory conditions, specific workplace conditions must be taken into consideration separately.
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
fluoroelastomer (Viton)
Eye protection:
Safety glasses
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. No eating, drinking, smoking or tobacco use at the place of work. Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

1. Reactivity
When heated can give off ignitable vapours.
2. Chemical stability
The product is stable if stored and handled as prescribed/indicated.
3. Possibility of hazardous reactions
None if used for intended purpose.
4. Conditions to avoid
See MSDS section 7 - Handling and storage. Avoid all sources of ignition: heat, sparks, open flame.
5. Incompatible materials
Substances to avoid:
No substances known that should be avoided.
6. Hazardous decomposition products
No hazardous decomposition products known.

Disposal considerations

Must be disposed of or incinerated in accordance with local regulations.