Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Symptomatic treatment. Seek medical attention.
Emergency measure - Eyes: Rinse eyes thoroughly for at least 15 minutes with clean
water. Seek medical attention if irritation persists.
Emergency measure - Skin: Remove contaminated clothing (launder before re-use). Rinse
affected area thoroughly for at least 15 minutes. Seek
medical attention if irritation persists.
Emergency measure - Ingestion: Symptomatic treatment. Do not induce vomiting.

Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water fog or foam may be used.

Product arising from burning: Products of combustion may contain oxides of carbon and

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Wear suitable protective clothing (see 2.3.1). Material is
readily dispersible in water which may result in an effluent
discharge with elevated colour and suspended solids. Prevent
material from entering sewers or other waterways.

Absorb spillages of dispersions with a suitable inert
material (eg sand or soil). Carefully transfer the spillage
to labelled waste containers, or use a sealed industrial
vacuum machine. Dispose of waste material by incineration in
accordance with local regulations.

Clean the spillage area with water and detergent.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by
ingestion and skin contact.

Engineering controls are necessary to reduce exposure to the

When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows; Chemical
protective gloves (Standard EN374) Chemical resistant
clothing (Standard EN368) Eye protection (Standard EN166)

When necessary appropriate respiratory protection should be

Storage: Store in tightly closed containers in a dry well-ventilated

Packaging of the substance and or preparation: 1 litre plastic bottles.

10 litre plastic containers.

5, 15 or 55 gallon high density polypropylene containers.

Finished inkjet printer cartridges.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport code: None.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not known.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not possible.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of in
accordance with local regulations. (A650)

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration in
accordance with local regulations. Waste gas treatment to
remove oxides of nitrogen should be fitted. (A661)

Industry - Possibility of destruction - water purification: Direct discharge to the sewage system or aqueous environment
should be avoided. However, adverse effects on sewage
treatment systems would be unlikely.

Public at large - Possibility of recovery/recycling: The substance will only enter the public domain in the form
of articles that can be disposed of as domestic waste.