Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove the person to fresh air. Give oxygen or artificial
respiration if needed. Seek medical attention.
Emergency measure - Eyes: Flush eyes immediately with plenty of water for 15 minutes

Seek medical attention
Emergency measure - Skin: Flush skin immediately with plenty of water for 15 minutes.

Seek medical attention.

Wash soiled clothing before wearing again
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide, dry chemical powder, alcohol and universal
foam, and water spray.

Product arising from burning: Carbon oxides, Sulfonium oxides, hydrogen floride (derived
from the structure).

Product determined by test: N

Protective equipment: Wear appropriate protective clothing.

Fire fighters should wear air supplied respirators.

Accidental release measures

Emergency measures in case of spillage: Evacuate non-essential personnel. Keep personnel removed
from and upwind of spill.

Eliminate all ignition sources. Sweep up into containers
and seal. Dispose of material in accordance with government
requirements and ensure conformity to local disposal

Do not wash into sewer or waterways.

Handling and storage

Handling: The preparation containing the substance will only be used
in the integrated circuits industry by trained personnel.
Exposure is minimal. Inhalation and skin contact are
avoided by the use of impermeable protective gloves and dust
masks. Dust proof filling apparatus and appropriate
ventilation are also used.

Storage: The preparation containing the substance should be kept in
securely closed unbreakable containers. Keep away from
foodstuffs and sources of ignition. Store in a cool and
dark place away from humidity.

Do not expose to any UV light sources.

Packaging of the substance and or preparation: The preparation is packed into either one gallon or one
quart bottles, which are then put in a cardboard box.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: The preparation containing the substance should be kept in
an appropriate, tightly closed container during transport.
Containers should be stored upright and secured against
falling down. Containers should be suitably labelled and

Do not expose to any UV light sources.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Possible dust explosion.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance is used in very small quantities, is a
photoresist and decomposes when used, therefore recycling of
it is not possible.

Any spilled material is not recovered but is disposed of by
incineration or disposal to landfill in accordance with
local regulations.

Industry - Possibility of neutralisation: Not known

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of the preparation
mixed with inert material (e.g. sand or soil) may be
disposed of at an authorised tip in accordance with local

Industry - Possibility of destruction - incineration: Incineration is the preferred method of disposal. The
preparation may be disposed of by burning under controlled
conditions at a licensed waste treatment processor in
accordance with local regulations. Stack gases should be
scrubbed as noxious fumes (e.g. carbon dioxide) could be

Industry - Possibility of destruction - water purification: In the unlikely event that the preparation should enter the
water treatment system, contaminated waste water should be
treated by means of flocculation precipitation. The
precipitated material should then be incinerated.

Industry - Possibility of destruction - other: None known

Public at large - Possibility of recovery/recycling: Not applicable