Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move the victim to fresh air. Aid in breathing if necessary
and seek medical attention.
Emergency measure - Eyes: Immediately flush eyes with plenty of flowing water for at
least 15 minutes. Remove contact lenses if easily possible.
Seek medical attention if irritation occurs.
Emergency measure - Skin: Immediately flush skin with plenty of water. Remove
contaminated clothing and shoes. Wash clothing before re-
use. Seek medical attention if irritation occurs.
Emergency measure - Ingestion: Rinse mouth and then drink plenty of water. In case of
persistent symptoms, consult a doctor.

Fire-fighting measures

Recommended extinguishing agent: No special provisions for extinguishing media are required.
As such, foam, water fog, carbon dioxide or dry powder
extinguishers may be used as appropriate to the conditions
of the fire.

Product arising from burning: The substance is combustible and will burn if involved in

a fire, evolving noxious fumes (eg carbon dioxide, sodium
and phosphate containing compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material

(eg. sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled

in the same way as the original substance containers.


Clean the spillage area with water and detergent.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.

Inhalation of the substance and skin contact should be
avoided and eye contact is excluded. Dust-proof equipment
should be used during filling, transfer and metered feeding
as well as during sam-pling. In the case of handling in open
systems, any dust that can form must be extracted directly
at the point of origin. If technical extraction or
ventilation measures are not possible or are insufficient,
the wearing of respiratory protection (e.g. :::) is
recommended. To avoid skin contact, the wearing of
protective gloves (e.g. :::) and, if applicable, suitable
protective clothing (e.g. :::) is recommended. Safe eye
protection (e.g. :::) is absolutely essential. Eye douches
should be made available in the immediate vicinity of the
work area and their location should be indicated
conspicuously.


Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.


Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling

exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.


If dust can develop, due to the potential dust explosion
risk, potential ignition sources should be removed from the
work area. In addition, measures should be taken to prevent
electrostatic discharges.


These measures should be regarded as a minimum.

Storage: Store in the freezer at approximately -20 °C.

For the storage the original packaging drums or other
unbreakable and correctly labelled containers are to be
used. Keep containers tightly closed when not in use and
secure by suitable measures against falling down. Avoid
product residues on the packing drums.

Packaging of the substance and or preparation: Carton, 1 kg.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None that is hazardous, as the substance is dissolved in
water in the formulation process.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. It is not possible to recover
larger spillages of uncontaminated material for subsequent
use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is an
eye irritant. No chemical treatment is practicable to
neutralise the hazardous health and environmental
properties.


The dust hazard will be minimised by appropriate handling
and storage.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides, sodium and phosphate containing compounds) could be
formed.


No hazards have been envisaged if the material is
incinerated in authorised manner.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly

to the sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Consumer use of cosmetic and hygiene products will result in
release of the substance to the environment via the foul
sewer. This release will be widespread and disperse.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None.