[No public or meaningful name is available]

Guidance on Safe Use

First-aid measures

Emergency measure - Inhalation: If symptomatic, move to fresh air. Treat symptomatically.

Get medical attention if symptoms occur.

Emergency measure - Eyes: Any material that contacts the eye should be washed out

immediately with water. Get medical attention if symptoms

occur.

Emergency measure - Skin: Wash off with soap and water. Get medical attention if

symptoms occur.

Emergency measure - Ingestion: Seek medical attention immediately

Fire-fighting measures

Recommended extinguishing agent: water spray, carbon dioxide (CO2), dry chemical

Product arising from burning: Carbon oxides, nitrogen oxides, sulphur oxides,

oxides of copper

Product determined by test: N

Protective equipment: Wear self-contained breathing apparatus and protective

clothing. Fire or excessive heat may produce hazardous

decomposition products. Use water spray to cool

unopened containers.

Accidental release measures

Emergency measures in case of spillage: Shovel into suitable container for disposal. Avoid dust

formation. Clean contaminated surface thoroughly.

Handling and storage

Handling: Avoid breathing dust.  Avoid contact with eyes, skin,

and clothing.  Ensure adequate ventilation.  Wash

thoroughly after handling.

Storage: Keep container tightly closed.  Keep away from

incompatible substances such as strong oxidizing

agents.

Packaging of the substance and or preparation: For wide format commercial applications, the ink will

be supplied in three formats:

(1) sealed bottles with a septum < 1 litre in volume;

(2) in openable bottles < 1 litre in volume; or

(3) in sealed cartridges < 1 litre in volume.

An additional packaging configuration could be a

solution in a sealed printing system head containing

less than 20 mL of solution.  The concentration in all

four potential applications would likely be less than

or equal to 5% of the notified dye mixture.

For the consumer household use, the ink will be in

sealed cartridges containing less than 50 mL of ink.

The concentration of the notified dye mixture in this

application will likely be at less than or equal to

5% in concentration.  An additional packaging

configuration for the household could be a sealed

printing system head containing < 20 mL of solution.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Transport code: None, not regulated
Transport: Not regulated for all modes of transportation.

SpecialProvisions

Stability and reactivity

Danger other than fire: Fire or high temperatures may cause decomposition.

Dust may form explosive mixture in air.

Keep away from heat. Exercise caution if heating,

especially in a closed container. Dust may form

explosive mixture in air. Minimize dust generation

and accumulation. Ensure adequate ventilation. Keep

away from sources of ignition.

Chemical reaction with water: None reported

Dust explosion: There are no data or experience indicating this

substance presents a dust explosion hazard; however

no testing has been conducted to characterize its

dust explosibility properties.  Fines of this

substance, like those of many organic dusts, may be

capable of forming explosible dust clouds in air.

Minimize dust generation and accumulation.  Keep away

from sources of ignition.  Use adequate ventilation.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: No anticipated direct release to environment.

Industry - Possibility of neutralisation: No anticipated direct release to environment.

Industry - Possibility of destruction: controlled discharge: No anticipated direct release to environment.

Industry - Possibility of destruction - incineration: No anticipated direct release to environment.

Industry - Possibility of destruction - water purification: No anticipated direct release to environment.

Industry - Possibility of destruction - other: The environmental releases of the substance during

relevant life-cycles were estimated using default

release factors and industry information from the EU

Technical Guidance Document (TGD).  Estimated emissions

were based upon the maximum Level VIIB imported tonnage

of 1 tpa.  The substance will be imported as product

units prepared for customer use, therefore environmental

release from production and formulation activities will

not occur.  It is expected that environmental releases,

if any, would result from discarding contaminated

product containers.

Public at large - Possibility of recovery/recycling: No anticipated direct release to environment.

Public at large - Possibility of neutralisation: No anticipated direct release to environment.

Public at large - Possibility of destruction: controlled discharge: No anticipated direct release to environment.

Public at large - Possibility of destruction - incineration: No anticipated direct release to environment.

Public at large - Possibility of destruction - water purification: No anticipated direct release to environment.

Public at large - Possibility of destruction - others: The environmental releases of the substance during

relevant life-cycles were estimated using default

release factors and industry information from the EU

Technical Guidance Document (TGD).  Estimated emissions

were based upon the maximum Level VIIB imported tonnage

of 1 tpa.  The substance will be imported as product

units prepared for customer use, therefore environmental

release from production and formulation activities will

not occur.  It is expected that environmental releases,

if any, would result from discarding contaminated

product containers.