Registration Dossier

Administrative data

First-aid measures

Inhalation: Move to a fresh air atmosphere. In case of persistent symptoms, consult a doctor.
Skin contact: Wash with soap and water.
Eye contact: Rinse immediately with plenty of water. If irritation persists, seek medical attention.
Ingestion: Consult a doctor.

Fire-fighting measures

Specific risks: Product is inert, non flammable and non combustible.
Special intervention methods: Product is inert, non flammable and non combustible.

Accidental release measures

Personal precautions: Wear adequate personal protective equipment.
Environmental precautions: Prevent run-off from entering ground, storm sewers and ditches which lead to natural waterways.
Cleaning Methods: Use any feasible mechanical means (e.g. vacuum, sweeping) but avoid dusting during clean-up. The product can cause slippery conditions if wet. Even at low concentration, the product renders the discharge in liquid effluent highly visible.

Handling and storage

Handling: Avoid cullet to prevent from injury.
Storage conditions: Keep in a dry place. Avoid exposure to moisture/humidity.
Incompatible materials: None.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Remarks:
Glass is not regulated under UN, IMDG, ADR, RID, ICAO/IATA.

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
Glass is not regulated under UN, IMDG, ADR, RID, ICAO/IATA.

Marine transport (IMDG)

Remarks
Glass is not regulated under UN, IMDG, ADR, RID, ICAO/IATA.

Air transport ICAO/IATA

Remarks
Glass is not regulated under UN, IMDG, ADR, RID, ICAO/IATA.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical measures
Control parameters: Ensure sufficient ventilation. Reduce inhalation hazards in minimising the occupational exposure. Comply with the OccupationalExposure Limits found in National Guidance documents.

Protective equipment
Respiratory protection: A respirator must be used if the dust concentration is likely to exceed the occupational exposure limit. An approved dust respirator is recommended as appropriate depending on dust levels and other workplace factors.
Skin protection: Respect main rules concerning the protection clothes for chemicals handling.
Hand protection: Prolonged exposure should be avoided by wearing suitable impervious protective gloves.
Environmental exposure controls: Do not allow material to contaminate ground water system.
Eye protection: The use of dustproof goggles or glasses with side protections is recommended if dust concentrations are likely to exceed the occupational exposure limit.
Hygiene Measures: Individuals having sensitive skin may find it beneficial to use a barrier cream or moisturizer when excessive or prolonged contact with the skin is likely.

Engineering controls and safe systems of work should be used in preference to Personal Protective Equipment (PPE) to minimise the risk of exposure.

Stability and reactivity

Stability: Stable under normal conditions.
Conditions to avoid: None known.
Materials to avoid: None reasonably foreseeable.
Hazardous decomposition products: None known

Disposal considerations

Waste disposal: Dispose of in compliance with local and national regulations.