Registration Dossier

Administrative data

First-aid measures

Move to fresh air, consult doctor if complaint persists.
Skin contact:
Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon, preferably after soaking in
warm soapy water.
Burns should be treated normally after the adhesive has been removed from the skin.
If lips are accidentally stuck together apply warm water to the lips and encourage maximum wetting and pressure from saliva
inside the mouth.
Peel or roll lips apart. Do not try to pull the lips apart with direct opposing action.
Eye contact:
If the eye is bonded closed, release eyelashes with warm water by covering with wet pad.
Cyanoacrylate will bond to eye protein and will cause periods of weeping which will help to debond the adhesive.
Keep eye covered until debonding is complete, usually within 1-3 days.
Do not force eye open. Medical advice should be sought in case solid particles of cyanoacrylate trapped behind the eyelid
cause any abrasive damage.
Ensure that breathing passages are not obstructed. The product will polymerise immediately in the mouth making it almost
impossible to swallow. Saliva will slowly separate the solidified product from the mouth (several hours).

Fire-fighting measures

Suitable extinguishing media:
Foam, extinguishing powder, carbon dioxide.
Fine water spray
Special hazards arising from the substance or mixture
Oxides of carbon, oxides of nitrogen, irritating organic vapors.
Advice for firefighters
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation
Environmental precautions
Do not let product enter drains
Methods and material for containment and cleaning up
Scrape up spilled material and place in a closed container for disposal.

Handling and storage

Precautions for safe handling
Ventilation (low level) is recommended when using large volumes
Hygiene measures:
Good industrial hygiene practices should be observed.
Conditions for safe storage, including any incompatibilities
Store in sealed original container.
Specific end use(s)

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.

Inland waterway transport (ADN(R))

Shippingopen allclose all
Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.

Marine transport (IMDG)

Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.

Air transport ICAO/IATA

Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
Respiratory protection:
Ensure adequate ventilation.
Hand protection:
The use of chemical resistant gloves such as Nitrile are recommended.
Polyethylene or polypropylene gloves are recommended when using large volumes.
Do not use PVC, rubber or nylon gloves.
Please note that in practice the working life of chemical resistant gloves may be considerably reduced as a result of many
influencing factors (e.g. temperature). Suitable risk assessment should be carried out by the end user. If signs of wear and
tear are noticed then the gloves should be replaced.
Eye protection:
Wear protective glasses.

Stability and reactivity

Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
See section reactivity
Conditions to avoid
Stable under normal conditions of storage and use.

Disposal considerations

Waste treatment methods
Product disposal:
Dispose of in accordance with local and national regulations.
Disposal of uncleaned packages:
Disposal must be made according to official regulations.
Waste code
08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances