Registration Dossier

Administrative data

First-aid measures

Inhalation: Move to fresh air, consult doctor if complaint persists.
Skin contact: Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.
Eye contact: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Ingestion: Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting.
Seek medical advice, symptomatic treatment.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: All common extinguishing agents are suitable.
Extinguishing media which must not be used for safety reasons: Water jet (solvent-containing product).
Special hazards arising from the substance or mixture: In case of fire toxic gases can be released.
Advice for firefighters: Wear self-contained breathing apparatus.
Wear protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear protective equipment.
Danger of slipping on spilled product.
Avoid contact with skin and eyes.
Keep unprotected persons away.
Environmental precautions: Do not empty into drains / surface water / ground water.

Handling and storage

Precautions for safe handling
Avoid open flames and sources of ignition.
Take measures to prevent the build-up of electrostatic charges.
Hygiene measures: Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
Conditions for safe storage, including any incompatibilities: Store in sealed original container protected against moisture.
Ensure good ventilation/extraction. Store in a cool, dry place.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls: Ensure good ventilation/extraction.
Respiratory protection: Suitable breathing mask when there is inadequate ventilation.
Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least
protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm
thickness) or natural rubber (NR; >=1 mm thickness) Suitable materials for longer, direct contact (recommended: protection
index 6, corresponding to > 480 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or
natural rubber (NR; >=1 mm thickness) This information is based on literature references and on information provided by
glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of
chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN
374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should
be replaced.
Eye protection: Goggles which can be tightly sealed.
Skin protection: Protective clothing that covers arms and legs.
Advices to personal protection equipment: Use only personal protection that's CE-labelled according to the regulation no. 819 of 19 August 1994.

Stability and reactivity

Reactivity: None if used for intended purpose.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: See section reactivity
Conditions to avoid: None if used for intended purpose.
Incompatible materials: None if used properly.
Hazardous decomposition products: No decomposition if used according to specifications.

Disposal considerations

Waste treatment methods
Product disposal: The valid EEC waste code numbers are not product-related but are largely source-related.
These can be requested from the manufacturer.
In consultation with the responsible local authority, must be subjected to special treatment.