Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove from exposure and keep patient at rest. Seek medical
attention.
Emergency measure - Eyes: Irigate thoroughly with water for at least 15 minutes. Seek
medical attenton immediately.
Emergency measure - Skin: Wash affected areas with water.
Emergency measure - Ingestion: Seek medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Water spray, foam, dry powder or carbon dioxide

Product arising from burning: Oxides of carbon and nitrogen, halogen containing compounds.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: In the event of a large spillage wear an airsuit, rubber
gloves and rubber boots and carefully collect up the solid
and transfer to a sealed container. Wipe up any powder left
with a damp cloth and place in a container for disposal.


In the event of a small spillage wear a laboratory coat, eye
protection, rubber gloves and if the spillage occurs
outside a fume cupboard, a dust respirator to FFP2S
protection. Collect up the solid carefully and transfer to
a sealed container. Wipe up any powder left with a damp
clothand place in a container for disposal.




Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.



Engineering controls are necessary to reduce exposure to the
substance.



When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a dry, well-ventilated area.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 25 kg drum (usually fibreboard), double bagged PE antistatic
liners.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In principle,
it may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is
considered hazardous to health.


No chemical treatment is practicable to neutralise the
hazardous health properties.


The dust hazard will be minimised by appropriate handling
and storage.

Industry - Possibility of destruction: controlled discharge: Not possible.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides and halogen containing compounds) could be
formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.