Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: IF INHALED: Remove individual to fresh air.
Emergency measure - Eyes: IF IN EYES: Flush eyes with plenty of water for at least 15
minutes. Call a physician if irritation develops.
Emergency measure - Skin: IF ON SKIN: Flush skin with water for 15 minutes. Call a
physician if irritation develops.
Emergency measure - Ingestion: IF SWALLOWED: Immediately drink water to dilute. Consult a
physician if symptoms develop. Never give anything by mouth
to an unconscious person.

Fire-fighting measures

Recommended extinguishing agent: Use carbon dioxide, dry chemical or water spray.

Product arising from burning: Carbon monoxide, carbon dioxide, Oxides of nitrogen.

Product determined by test: N

Protective equipment: In case of fire, use normal fire fighting equipment
including an approved self-contained breathing apparatus
(SCBA). Use water to cool containers.

Accidental release measures

Emergency measures in case of spillage: Personal Protection for Emergency Situations: No extra
protection required beyond that listed in Section 2.3.00.
In case of fire, use normal fire fighting equipment.


Spill Mitigation Procedures:


- Air Release: The very fine particles can cause a fire or
explosion, eliminate all ignition sources. Dusting may be
suppressed by the use of local ventilation.

- Water Release: Notify all downstream users of possible
contamination. Divert water flow around spill if possible
and safe to do so. If unable to divert, create a filtration
dam to remove material.

- Land Release: Do not place spill materials back in their
original containers. Vacuum or sweep up material and place
in a disposal container. Decontaminate all clothing and the
spill area using a detergent and flush with large amounts of
water. Contain all contaminated water for disposal and/or
treatment.

- Additional Spill Information: Stop source of spill as
soon as possible and notify appropriate personnel. Utilize
emergency response personal protection equipment prior to
the start of any response. Evacuate all non-essential
personnel.

Waste Disposal Summary: Spent or discarded material is not
expected to be a hazardous waste.

Disposal Methods: Dispose of in a permitted industrial
wastelandfill following National and EU laws, directives and
regulations.

Handling and storage

Handling: - Stable under normal conditions.

- Conditions to Avoid: Avoid direct exposure to sunlight or
ultraviolet (UV) light sources. Sparks, open flame, other
ignition sources, and elevated temperatures.

- Do not take internally. Avoid contact with skin, eyes and
clothing. Upon contact with skin or eyes, wash off with
water. Avoid breathing (dust, vapor, mist, gas). May form
flammable dust-air mixtures. Minimize dust generation and
accumulation.

- Ventilation: Local exhaust ventilation is recommended if
significant dusting occurs. Otherwise use general exhaust
ventilation.

- Protective Equipment for Routine Use of Product:

* Respiratory Protection: Respiratory protection not
normally needed.

* Respirator Type(s): An approved air purifying respirator
with dust/mist filter (P1, EN 143). Air purifying
respirators should not be used in oxygen deficient or IDLH
atmospheres or if exposure concentrations exceed ten (10)
times the published limit.


* Skin: Not normally required.

* Eyes: Use safety glasses with side shields (EN166).


* Protective Clothing Type: Impervious.

Storage: Store in a cool, dry and well ventilated place. Isolate from
incompatible materials. Do not expose to direct light.


Incompatible Materials for Storage: strong oxidizing agents.


Do Not Store at temperatures Above: 25 Deg. C. 77 Deg. F.

Packaging of the substance and or preparation: Ship in tightly sealed containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Not regulated.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Reactive Properties: Not sensitive to mechanical shock.
Product is sensitive to electrical static discharge.


Hazardous Polymerization: Will not occur.


Chemical Incompatibility: strong oxidizing agents.

Chemical reaction with water: None.

Dust explosion: See test report section 3.1.40



Repeat 1:

Dust Explosion Class : 1 Weak Dust Explosion.

Coded Comment Dust Explosion : with inductivity

Test Method Dust Explosion : 20 lt ball at 10'000 Joule
Minimal Ignition Energy : > 3 and <= 10 mJ

1. Residue of sieve > 63 æ : 44 %


Repeat 2:

Coded Comment Dust Explosion : not milled 1.

Median value : 69 æ

**********************************************************

Assessment Dust Explosion : Positive

Test Method Dust Explosion : Modified Hartmann tube

Minimal Ignition Energy : < 1 J

**********************************************************

Coded Comment Dust Explosion : without inductivity

Test Method Dust Explosion : Mike III (minimal ignition
energy test)

Minimal Ignition Energy : > 30 and <= 100 mJ

Dust explosion determined by test: Y

Disposal considerations

Industry - Possibility of recovery/recycling: None

Industry - Possibility of neutralisation: No hazardous effects

Industry - Possibility of destruction - incineration: Possible