Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air and seek medical attention.
Emergency measure - Eyes: Flush with copious amounts of water for at least 15 minutes.
Seek immediate medical attention.
Emergency measure - Skin: Wash affected area efficient with water, take off
contaminated clothes.
Emergency measure - Ingestion: After swallowing, seek immediatly medical attention.

Fire-fighting measures

Recommended extinguishing agent: Foam, water scatter jet, carbon dioxide, dry powder

Product arising from burning: Kohlenmonoxid, Kohlendioxid, Stickstoffoxide,


Carbon monoxide, carbon dioxide, nitrogen oxides, hydrogen

Product determined by test: N

Protective equipment: Air circulation independent respirator

Accidental release measures

Emergency measures in case of spillage: Avoid dust creation. Absorb the released substance
mechanically and compile it in a well closed container.

To take the substance up, priority should be given to the
use of an industrial vacuum cleaner of approved design.

The compiled material has to be disposed properly.
Adequately label the containes filled with the substance
that hs been taken up (if applicable, in accordance with
Technical Rule 201).

The cleaning workforce has to follow the protective
measures, which are descriped in chapter "handling".

Prevent substance form attaining into the sewage system or
surface water (dike, blocking-out, collect).

Handling and storage

Handling: For all operations the methods and principles of 19 ChemG
and 19 Gefahrenstoffverordnung will be complied. The
conventional precautions for the chemical industry for the
handling with chemicals have to be considered:

All working methods must be designed so that exposure by
inhalation of the substance is minimised. In addition, skin
contact with the substance should be avoided. Closed, or at
least dustproof, equipment should be used during filling and
metered feeding as well as, if applicable, during sampling.
In the case of handling in open systems, any dust that can
form must be extracted directly at the point of origin. If
technical extraction or ventilation measures are not
possible or are insufficient, respiratory protection to the
standard EN 149 (see below) should be worn. To avoid skin
contact, tested protective gloves according to standard EN
368 (see below) should be worn. Outdoor clothing should be
kept separate from working clothes.

- respiratory protection: (particle filtering half mask P 3)
- eye protection: glasses

- hand protection: butyl or nitrile gloves

- one-way-protective clothing

Open and handle the container with care. Take care of
sufficient suction and ventilation. Dust formation has to be

If dust can develop, due to the potential of explosion risk,
potential ignition sources should be removed from the work
area. In addition, measures such as earthing all equipment
and plant parts should be taken to prevent electrostatic
discharge. Do not use any spark-producing equipment or

Storage: Keep dry and cool on a well conditioned place.

Storage only in the original container.

Keep away from light.

Keep containers tightly closed and secure against falling.
Containers label accoring to the regulations.

Packaging of the substance and or preparation: Fiber barrel with PE-inner sack.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport code: UN-Nr. 3077
Transport: The transport of the substance is permitted only in fail-
safed, audited container. The general principals for charge
protection as well as the hazardous goods regulation have to
be applied.

Further Transport-codes:

IMDG-Code: Kl. 9 Ziff. III

ADR/RID: Kl. 9 Ziff. III

SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: When safety treatment is applied, no danger has to be

Chemical reaction with water: Unknown

Dust explosion: Not expected

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance will be completely transformed. A chemical
recovery over fractional crystallisation would be

Industry - Possibility of neutralisation: Unknown

Industry - Possibility of destruction: controlled discharge: Combustion with flue gas scrubber.

Industry - Possibility of destruction - incineration: Residues and not cleanable packages requires special

Industry - Possibility of destruction - water purification: Unknown

Industry - Possibility of destruction - other: Unknown

Public at large - Possibility of recovery/recycling: Not relevant, because the substance is an industrial
intermediate for internal purpose only and will not be
emitted to the public.