Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 25th August 2011 to 17th November 2011
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 011
- Report date:
- 2011
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying Ocular Corrosives and Severe Irritants)
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Qualifier:
- according to guideline
- Guideline:
- other: The Ocular Toxicity Working Group (OTWG) of the Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) and the National Interagency Centre for the Evaluation of Alternative Toxicological Methods (NICEATM), Background Review D
- Qualifier:
- according to guideline
- Guideline:
- other: In Vitro Techniques in Toxicology Database (INVITTOX) protocol 127. Bovine Opacity and Permeability (BCOP) Assay, 2006.
- Qualifier:
- according to guideline
- Guideline:
- other: Gautheron P., Dukic M., Alix D. and Sina J.F., Bovine corneal opacity and permeability test: An in vitro assay of ocular irritancy. Fundam Appl Toxicol 18:442-449, 1992.
- GLP compliance:
- yes
Test material
- Reference substance name:
- (2E)-N-(5-Cyano-4-{(E)-[(dimethylamino)methylene]amino}-2-methoxyphenyl)-4-(piperidin-1-yl)but-2-enamide
- Molecular formula:
- C20 H27 N5 O2
- IUPAC Name:
- (2E)-N-(5-Cyano-4-{(E)-[(dimethylamino)methylene]amino}-2-methoxyphenyl)-4-(piperidin-1-yl)but-2-enamide
Constituent 1
Test animals / tissue source
- Species:
- cattle
- Details on test animals or tissues and environmental conditions:
- SOURCE OF COLLECTED EYES
- Source: slaughterhouse (Vitelco, 's Hertogenbosch, The Netherlands)
- Transport: Eyes were collected and transported in physiological saline in a suitable container.
- Indication of any existing defects or lesions in ocular tissue samples: All eyes were carefully examined for defects by holding the eyes submersed in physiological saline. Those exhibiting unacceptable defects, such as opacity, scratches, pigmentation and neovascularization were discarded.
-- Selection and preparation of corneas: The isolated corneas were stored at 32 +/-1 C in a petri dish with cMEM (Eagle’s Minimum Essential Medium (Invitrogen Corporation, Breda, The Netherlands) containing 1% (v/v) L-glutamine (Invitrogen Corporation) and 1% (v/v) Foetal Bovine Serum (Invitrogen Corporation)). The isolated corneas were mounted in a corneal holder (one cornea per holder) of MC2 (Clermont, France) with the endothelial side against the O-ring of the posterior half of the holder. The anterior half of the holder was positioned on top of the cornea and tightened with screws. The compartments of the corneal holder were filled with cMEM of 32 1 C. The corneas were incubated for the minimum of 1 hour at 32 +/-1 C.
- Quality check of the isolated corneas: After the incubation period, the medium was removed from both compartments and replaced with fresh cMEM. Opacity determinations were performed on each of the corneas using an opacitometer (OP-KIT, MC2, Clermont, France). The opacity of each cornea was read against an air filled chamber, and the initial opacity reading thus determined was recorded. Corneas that had an initial opacity reading higher than 7 were not used.
Test system
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- 300 to 307 mg
- Duration of treatment / exposure:
- 240 +/-10 minutes
- Number of animals or in vitro replicates:
- Three corneas per treatment group
- Details on study design:
- Opacity measurement
The opacitometer determined the difference in the light transmission between each control or treated cornea and an air filled chamber. The numerical opacity value (arbitrary unit) was displayed and recorded. The change in opacity for each individual cornea (including the negative control) was calculated by subtracting the initial opacity reading from the final post-treatment reading. The corrected opacity for each positive control or test substance treated cornea was calculated by subtracting the average change in opacity of the negative control corneas from the change in opacity of each positive control or test substance treated cornea. The mean opacity value of each treatment group was calculated by averaging the corrected opacity values of the treated corneas for each treatment group.
Application of sodium fluorescein
Following the final opacity measurement, permeability of the cornea to Na-fluorescein was evaluated. The medium of both compartments (anterior compartment first) was removed. The posterior compartment was refilled with fresh cMEM. The anterior compartment was filled with 1 ml of 5 mg Na-fluorescein/ml cMEM solution. The holders were slightly rotated, with the corneas maintained in a horizontal position, to ensure uniform distribution of the sodium-fluorescein solution over the entire cornea. Corneas were incubated in a horizontal position for 90 +/- 5 minutes at 32 +/-1 C.
Permeability determinations
After the incubation period, the medium in the posterior compartment of each holder was removed and placed into a sampling tube labelled according to holder number. 360 ul of the medium from each sampling tube was transferred to a 96-well plate. The optical density at 490 nm (OD490) of each sampling tube was measured in triplicate using a microplate reader. Any OD490 that was 1.500 or higher was diluted to bring the OD490 into the acceptable range (linearity up to OD490 of 1.500 was verified before the start of the experiment). OD490 values of less than 1.500 were used in the permeability calculation. The mean OD490 for each treatment was calculated using cMEM corrected OD490 values. If a dilution was performed, the OD490 of each reading was corrected for the mean negative control OD490 before the dilution factor was applied to the readings.
Results and discussion
In vitro
Resultsopen allclose all
- Irritation parameter:
- cornea opacity score
- Run / experiment:
- mean, three replicates
- Value:
- -1
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- mean, three replicates
- Value:
- 0.2
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- It is concluded that this test is valid and that PF-05201372 is not severe irritant or corrosive in the Bovine Corneal Opacity and Permeability test under the experimental conditions described in this report.
- Executive summary:
Screening for the eye irritancy potential of PF-05201372 using the Bovine Corneal Opacity and Permeability test (BCOP test).
This report describes the ocular irritation properties of PF-05201372 on an isolated bovine cornea. The possible ocular irritancy of PF-05201372 was tested through topical application for approximately 240 minutes.
The study procedures described in this report were based on the most recent OECD and EC guideline.
Batch 902/299804/G/2/1 of PF-05201372 was an off-white powder with a purity of 98.2%. Since no workable suspension in physiological saline could be obtained, the test substance was used as delivered and added pure on top of the corneas (300 to 307 mg).
The negative control responses for opacity and permeability were less than the upper limits of the laboratory historical range indicating that the negative control did not induce irritancy on the corneas, except the permeability of one of the corneas. However since the permeability of the other two eyes were within the historical control data and the permeability of the third eye was just above the upper limit, this deviation in the permeability had no effect on the results of the study.
The mean in vitro irritancy score of the positive control (20% (w/v) Imidazole) was 116 and within the historical positive control data range. It was therefore concluded that the test conditions were adequate and that the test system functioned properly.
PF-05201372 did not induce ocular irritation through both endpoints, resulting in a mean in vitro irritancy score of 0.2 after 240 minutes of treatment.
Finally, it is concluded that this test is valid and that PF-05201372 is not severe irritant or corrosive in the Bovine Corneal Opacity and Permeability test under the experimental conditions described in this report.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)