Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2019-03-21 to 2019-05-09
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2019
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- other: MatTek Corporation Protocol: EpiOcular™ Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals
- Version / remarks:
- 2015-06-29
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- 2018-06-25
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- reaction mass of diethyl (E)-2-methylbut-2-enedioate, diethyl (Z)-2-methylbut-2-enedioate and diethyl 2-methylenebutanedioate
- Cas Number:
- 2245967-74-0
- Molecular formula:
- C9H14O4
- IUPAC Name:
- reaction mass of diethyl (E)-2-methylbut-2-enedioate, diethyl (Z)-2-methylbut-2-enedioate and diethyl 2-methylenebutanedioate
Constituent 1
Test animals / tissue source
- Species:
- human
- Strain:
- other: not applicable
- Details on test animals or tissues and environmental conditions:
- - Justification of the test method and considerations regarding applicability: The EpiOcular™ tissue consists of human-derived epidermal keratinocytes ressembling the human cornea. The EpiOcular ™ Eye Irritation Test (EIT) was validated by the European Union Reference laboratory for Alternatives to Animal Testing (EURL ECVAM) and cosmetics Europe between 2008 and 2013. Laboratory technical proficiency with the test system according to OECD Test Guideline 492 was demonstrated at Envigo CRS GmbH as documented in Envigo CRS project No. 1729900.
- Description of the cell system used, incl. certificate of authenticity and the mycoplasma status of the cell live: The EpiOcular™ tissue consists of normal, human-derived epidermal keratinocytes which have been cultured to form a stratified squamous epithelium similar to that found in the human cornea. EpiOcular™ kits (Lot No: 27098) and MTT-100 kits are purchased from MatTek Corporation (82105 Bratislava, Slovakia). The EpiOcular™ tissues (surface 0.6 cm²) were cultured on specially prepared cell culture inserts (MILLICELL, 10 mm ∅). A certificate of analysis is available, confirming that cells have been screened for potential biological contaminants (HIV-1 virus, Hepatitis B virus, Hepatitis C virus, bacteria yeast, and other funghi).
- RhCE tissue used, including batch number: All cells used to produce EpiOcular™ are purchased or derived from tissue obtained by MatTek Corporation from accredited institutes. The keratinocyte strain number used was 4F1188 and the Lot No was 27098.
Test system
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount applied: 50 µL of the undiluted test item - Duration of treatment / exposure:
- 30 minutes
- Duration of post- treatment incubation (in vitro):
- After rinsing, the tissues were immersed in pre-warmed assay medium at room temperature for 12 minutes (post-soak). Afterwards, the tissues were incubated for 120 minutes at 37 ± 1.5 °C in a humidified atmosphere of 5 ± 0.5% CO2.
- Number of animals or in vitro replicates:
- 2 in vitro replicates
- Details on study design:
- - Details of the test procedure used: The Reconstructed human Cornea-like Epithelium (RhCE) test method was used. 50 µL of the test item were applied topically on pre- equilibrated EpiOcular™ tissues. The tissues were incubated at 37 ± 1.5 °C and 5 ± 0.5% CO2 (standard culture conditions) for 30 minutes. Afterwards, the tissues were rinsed three times with PBS (approx. 100 mL). After rinsing, the tissues were immersed in 5 mL of Assay Medium for 12 minutes. At the end of the post-soak immersion, the inserts were transferred into the wells of a 6-well plate containing 1 mL of warm Assay Medium. The tissues were incubated under standard culture conditions for about 120 minutes. At the end of the post-treatment incubation, tissues were placed into a 24-well plate containing 0.3 mL of MTT solution and incubated for 180 minutes under standard culture conditions. Inserts were removed from the 24-well plate after 180 minutes and then transferred to a 24-well plate containing 2 mL isopropanol in each well. The plates were sealed with parafilm and a standard plate sealer, and were stored at 2-8 °C in the dark for about 16.5 h. To extract the MTT, the plates were placed on an orbital plate shaker and shaken for about 2 hours at room temperature. Then, the tissues were pierced. The extract solution was mixed and two 200 μL aliquots were transferred to the appropriate wells of a pre-labelled 96-well plate. The absorbance at 570 nm (OD570) of each well was measured with a plate reader (Versamax® Molecular Devices, 85737 Ismaning, Germany, Software Softmax Pro Enterprise, version 4.7.1). No reference wavelength measurement was used.
- Doses of test chemical and control substances used: 50 µL of undiluted test item and controls
- Duration and temperature of exposure, post-exposure immersion and post-exposure incubation periods: 30 minutes under standard culture conditions (exposure), 12 minutes at room temperature (post-exposure immersion) and 120 minutes under standard culture conditions (post-exposure incubation)
- Indication of controls used for direct MTT-reducers and/or colouring test chemicals: Isopropanol and deionized water (colouring test chemicals), deionized water (direct MTT-reduction)
- Number of tissue replicates used per test chemical and controls: Duplicates (test chemical, positive and negative control, freeze-killed tissues), not specified for MTT reduction
- Wavelength and band pass used for quantifying MTT formazan, and linearity range of measuring device: The absorbance at 570 nm (OD570) of each well was measured using a plate reader (Versamax® Molecular Devices, 85737 Ismaning, Germany, Software Softmax Pro Enterprise, version 4.7.1). No reference wavelength measurement was used.
- Description of the method used to quantify MTT formazan:
Data evaluation included:
1) The mean OD value of the blank control wells (ODblank) for each experiment was calculated.
2) The mean value of the two replicates for each tissue was calculated.
3) The mean ODblank from each mean OD value of the same experiment was subtracted (blank corrected values).
4) The mean value of the two relating tissues for each control (negative control (NC) and positive control (PC) and test item (TI) was calculated (ODTI, ODNC, ODPC).
5) The mean OD value of the negative control corresponds to 100% viability. Corrected negative control OD = Negative Control OD - ODblank = 100% viability
6) The percent viability of each test group relative to the negative control (= 100%) was calculated: Viability (%) = 100 * (ODTI / ODPC / ODNC) / mean ODNC
7) The difference of the viability values between duplicate tissues was calculated. If the difference is > 20 percentage points (p.p) the test is considered as non-qualified.
- Description of evaluation criteria used including the justification for the selection of the cut-off point for the prediction model: If the test item-treated tissue viability is > 60% relative to the negative control treated tissue viability, the test item is identified as not requiring classification and labelling according to UN GHS (No Category). If the test item-treated tissue viability is ≤ 60% relative to negative control treated tissue viability, no prediction can be made from this result in isolation and requires additional information for classification purposes. A single test composed of at least two tissue replicates should be sufficient for a test chemical, when the result is unequivocal. However, in cases of borderline results, such as non-concordant replicate measurements and/or mean percent tissue viability equal to 60±5%, a second test should be considered, as well as a third one in case of discordant results between the first two tests.
- Reference to historical positive and negative control results demonstrating suitable run acceptance criteria: See “Any other information on materials and methods incl. tables” and “Attached background material”
- Complete supporting information for the specific RhCE tissue construct used: See “Attached background material”
- Reference to historical data of the RhCE tissue construct: See “Attached background material”
- Demonstration of proficiency in performing the test method before routine use by testing of the proficiency chemicals: Yes, see “Attached background material”
- Positive and negative control means and acceptance ranges based on historical data: OD 0.107- 1.174, mean: 0.666 ± 0.276 (positive control) and OD 1.27 – 2.49, mean: 1.94 ± 0.310 (negative control)
- Acceptable variability between tissue replicates for positive and negative controls: See “Any other information on materials and methods incl. tables”
- Acceptable variability between tissue replicates for the test chemical: See “Any other information on materials and methods incl. tables”
Results and discussion
In vitro
Results
- Irritation parameter:
- mean percent tissue viability
- Run / experiment:
- Mean of run 1 and 2
- Value:
- 80.18
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Remarks:
- Mean viability of test item after data correction procedure
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: Not indicated
DEMONSTRATION OF TECHNICAL PROFICIENCY: See "Attached background material"
ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: Yes (The OD of the tissues treated with the negative control is > 0.8 and < 2.5 (1.911 and 1.968)).
- Acceptance criteria met for positive control: Yes (The tissue viability of the positive control is below 50% of the negative control viability (21.74%)).
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- It can be stated that in this study and under the experimental conditions reported, the test item was considered non-irritating and, thus, does not need to be classified according UN GHS.
- Executive summary:
This GLP compliant in vitro study was performed according to OECD guideline 492 to assess the eye irritation potential of the test item by means of the Human Cornea Model Test. The test item proved to be an MTT reducer in the MTT pre-test, but did not have intrinsic colour or proved to dye water or isopropanol in the colour interference pre-test. Therefore, additional tests with freeze-killed tissues had to be performed. The viability values resulted in these additional tests were used to correct the values gained in the main experiment. Tissues of the human cornea model EpiOcular™ were treated with the test item, the positive and the negative control for 30 minutes each in duplicate. 50 μL of the test item and of the controls, respectively, were applied to each tissue, spread to match the tissue size. Treatment with the positive control induced a decrease in the mean tissue viability compared with the negative control to 21.74%, thus the validity of the test system is ensured. The acceptance criteria were met. The difference of relative viability between the two relating tissues was < 20 p.p. in the same run (for test item tissues, positive and negative control tissues). Irritating effects were not observed following incubation with the test item. Compared with the value of the negative control, the mean absorption value corresponding to the tissue viability did not decrease below 60% (determined value for the test item: 80.18%).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.