Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice: Remove contaminated clothing and wash before reuse
IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position of comfort able for breathing. Keep patient warm. Get medical advice/attention if you feel unwell.
IF ON SKIN: Remove contaminated clothing immediately and wash affected skin with soap and water. If irritation (redness, rash, blistering) develops, get medical attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
IF SWALLOWED: Do not induce vomiting wash out mouth with water. Drink two glasses of water. Never give anything by mouth to an unconscious person. If symptoms occur obtain medical attention.
Symptoms: None known
Medical treatment: Treat symptomatically
Note to physician: Not applicable.

Fire-fighting measures

Suitable extinguishing media:
small scale: In case of fire, use water spray, foam, dry powder or CO2 to extinguish
Large Scale: In case of fire use foam or alcohol resistant foam.
Unsuitable extinguishing media: Do not use water jet. Direct water jet may spread the fire.
Special hazards arising from the substance: None known
Advice for firefighters: Firefighters should wear complete protective clothing including self-contained breathing apparatus. Do not breathe fumes. Keep containers cool by spraying with water if exposed to fire.

Accidental release measures

- Personal precautions: Ensure adequate ventilation. Avoid breathing dust. Keep upwind. Keep public away from affected area. Wear suitable protective clothing.
- Environmental precautions: Avoid release to the environment. Do not allow to enter drains, sewers or watercourses.
- Methods and material for containment and cleaning up: For small spills, soak up material with absorbent e.g paper towels. For large spills, cordon of spill area and minimise the spreading of spilled material. Soak up material with absorbent. Use water to flush spill area. Do not flush into sewer. Collect spilled material, absorbent and rinse water into suitable containers for proper disposal.

Handling and storage

- Precautions for safe handling: Good hygiene practices and housekeeping measures. Do not eat, drink or smoke during work. Ensure adequate ventilation. Avoid breathing dust. Avoid contact with skin, eyes and clothes. Contaminated clothing should be thoroughly cleaned.
- Conditions for safe storage, including any incompatibilities: Store in freezer away from sources of heat and UV light. Avoid contact with heat and ignition sources and oxidizers. Keep container tightly closed and in a well ventilated place.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Hygiene measures: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. Wash hands before breaks and after work. Ensure adequate ventilation. Remove contaminated clothing and wash before re-use.
Respiratory Protection: Based upon current information and in the absence of occupational exposure, limits the use of a dust mask to a minimum standard of EN149 FFPI.
Hand Protection: If repeated and/or prolonged skin exposure to the substance is likely, then wear suitable gloves. Recommended: EN374 type A.
Eye Protection: If exposure to the eye is likely, use eye protection according to EN166.
Skin and body protection: Wear impervious protective clothing, including boots, lab coat, apron or coveralls, as appropriate, to prevent skin contact. Recommended EN368.
Environmental Exposure Controls: Avoid release to the environment. Do not allow to enter drains, sewers or watercourses.

Stability and reactivity


Chemical stability: Stable under normal conditions
Possibility of hazardous reactions: None known. Thermal decomposition is unlikely
Conditions to avoid: Avoid contact with heat and ignition sources and oxidisers
Incompatible materials: Strong oxidising agents

Disposal considerations

Product disposal methods: Avoid release to the environment. Disposal should be in accordance with local, state or national legislation.
Packaging disposal methods: Ensure all packaging is disposed of safely.

Categories Display