Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air.
Emergency measure - Eyes: Rinse immediately with plenty of water for at least 15
minutes. Seek medical advice if symptoms persist.
Emergency measure - Skin: Wash immediately with plenty of water and soap if available.
Emergency measure - Ingestion: Seek medical advice.

Fire-fighting measures

Recommended extinguishing agent: Water spray, alcohol foam ,carbon dioxide or dry chemical.

Water stream may be ineffective.

Product arising from burning: Could contain the following: carbon monoxide, carbon
dioxide, oxides of sulphur (includes sulphur di and tri
oxides), oxides of nitrogen.

Product determined by test: N

Protective equipment: Self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Personnel should avoid conatct with skin and eyes.


Remove sources of ignition.

Wear appropriate personal protective equipment (as in
Section 2.3.10), impermeable boots and respirator.

Cover spills with some inert absorbent.

Sweep up into containers for disposal.

Flush spill area with water.

Handling and storage

Handling: Before eating, drinking or smoking, wash face and hands
thoroughly with soap and water.

Avoid unnecessary skin contact.

Impervious gloves and apron are recommended to avoid skin
contact.

For operations where eye or face contact can occur, wear eye
protection such as chemical splash proof goggles or face
shield.

Where exposures are below the Permissible Exposure Limit
(PEL), no respiratory protection is required.

Where exposures exceed the PEL, use respirator approved by
NIOSH for material and level of exposure.

Keep away from heat and flame. Wash thoroughly after
handling.

Storage: Storage areas should have fire-safe practises and electrical
equipment in accordance with Electrical and Fire Protection
codes (NFPA-30) governing Class III A combustible liquids.


Store in a cool, dry, well ventilated room away from sources
of ignition.

Packaging of the substance and or preparation: 55 gallon (250 kg) high density polyethylene (HDPE) drums.

275 gallon (1000 litre) tote bins constructed of a HDPE
bladder in a galvanised steel cage.

18,000 to 25,000 litres isotainers of 316 stainless steel.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN 1993
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Avoid strong acids and bases and also oxidising agents.

Chemical reaction with water: None reported.

Dust explosion: Not applicable as test substance is a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Aqueous waste streams containing the test substance can be
recycled in the use process.


There is no known method for recovery of the test substance.

Industry - Possibility of neutralisation: Incineration.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: This is the preferred method of disposal.


Code 660

Industry - Possibility of destruction - water purification: Not recommended.

Industry - Possibility of destruction - other: None known.

Public at large - Possibility of recovery/recycling: Not applicable as the test substance is not used in the
public domain.