Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove casualty to fresh air. If breathing is difficult,
give oxygen. If breathing ceases give artificial
respiration. If signs of toxicity occur seek immediate
medical attention.
Emergency measure - Eyes: Flush affected eye with copious amounts of water for at
least 15 minutes. Seek medical attention.
Emergency measure - Skin: Remove contaminated clothing. Wash affected area with
copious amounts of water for at least 15 minutes. If signs
of irritation persist seek medical attention.
Emergency measure - Ingestion: Drink copious amounts of water, seek medical advice
immediately or consult the poison information centre.

Fire-fighting measures

Recommended extinguishing agent: Water

Product arising from burning: Carbonmonoxid, carbondioxid, oxides of nitrogen, oxides of

Product determined by test: N

Protective equipment: Fire-fighters should wear full protective clothing and
self-contained breathing apparatus. Fire exposed containers
should be cooled using a water spray.

Accidental release measures

Emergency measures in case of spillage: As a minimum a dust/mist respirator, chemical safety goggles
and gloves should be worn when cleaning a spill. A
disposable suit and self-contained breathing apparatus
should be worn when cleaning large spills. Sweep material
onto paper. Place in a fibre drum.

Use an industrial vacuum cleaner. The spill area should be
ventilated and decontaminated after material has been
cleared. Material should be disposed of in accordance with
national regulations.

Handling and storage

Handling: SQ 29,707 should only be used in areas with adequate
ventilation. Local exhaust ventilation should be used in
areas where the material is handled to minimise dust

Skin and eye contact should be avoided so latex gloves and
chemical safety goggles should be worn. Inhalation of dust
should be avoided so a NIOSH approved and properly fitted
dust/mist respirator should be worn.

Hands and face should be thoroughly washed after handling of
the substances.

In order to avoid any dust formation, use dust proof
filling/refilling systems.

Storage: SQ 29,707 should be stored in sealed unbreakable containers
in a cool, dry place. The substance should be protected from
heat, moisture and air.

Avoid product residues on the containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport: SQ 29,707 should be transported in the above storage
conditions. Containers should be labelled accordingly and
secured against falling.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known

Chemical reaction with water: None known

Disposal considerations

Industry - Possibility of recovery/recycling: not possible

Industry - Possibility of neutralisation: No chemical neutralisation method is known.

Industry - Possibility of destruction: controlled discharge: Not recommended

Industry - Possibility of destruction - incineration: Incineration is acceptable provided that a closed-cycle

incenerator with scrubbers is employed. National

regulations must be observed

(661) Incinerator with flue gas scrubbing

Industry - Possibility of destruction - water purification: Not recommended

Industry - Possibility of destruction - other: Not recommended

Public at large - Possibility of recovery/recycling: SQ 29,707 is not intended for public use.