Registration Dossier

Administrative data

First-aid measures

Inhalation: Remove victim to fresh air and keep at rest in a position
comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact: Remove/Take off immediately all contaminated clothing.
Gently wash with plenty of soap and water. If skin irritation
or rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Ingestion: Get medical advice/attention if you feel unwell. Rinse
mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such
as rubber gloves and airtight goggles.

Fire-fighting measures

Suitable extinguishing
Media: Dry chemical, foam, water spray, carbon dioxide.
Specific hazards arising
from the chemical: Take care as it may decompose upon combustion or in high
temperatures to generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the
suitable fire-extinguishing method according to the
surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings:
Remove movable containers if safe to do so.
Special protective
equipment for firefighters: When extinguishing fire, be sure to wear personal protective
equipment.

Accidental release measures

Personal precautions,
protective equipment and
emergency procedures:
Use personal protective equipment. Keep people away from
and upwind of spill/leak.
Entry to non-involved personnel should be controlled
around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for containment
and cleaning up:
Sweep dust to collect it into an airtight container, taking care
not to disperse it.
Adhered or collected material should be promptly disposed
of, in accordance with appropriate laws and regulations.

Handling and storage

Technical measures: Handling is performed in a well ventilated place. Wear
suitable protective equipment.
Prevent dispersion of dust. Wash hands and face
thoroughly after handling.
Use a local exhaust if dust or aerosol will be generated.
Handling: Avoid contact with skin, eyes and clothing.
Storage conditions: Keep container tightly closed. Store in a dark and dry place.
Be sure not to give the container unexpected impacts, such
as falling down or falling off.
Store away from incompatible materials such as oxidizing
agents.
Packaging material: Comply with laws.

Transport information

Land transport (ADR/RID)

UN number:
none
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls: Install a closed system or local exhaust as possible so
that workers should not be exposed directly. Also install
safety shower and eye bath.
Personal protective equipment
Respiratory protection Dust respirator. Follow local and national regulations.
Hand protection Protective gloves.
Eye protection Safety glasses. A face-shield, if the situation requires.
Skin and body protection Protective clothing. Protective boots, if the situation
requires.

Stability and reactivity

Stability: Stable under proper conditions.
Possibility of hazardous
reactions:
Dust explosion possible if in powder or granular form, mixed with air.
No special reactivity has been reported.
Incompatible materials: Oxidizing agents
Hazardous Decomposition
Products: Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)

Disposal considerations

Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or
mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner
and scrubber system.Observe all federal, state and local regulations when disposing of the substance.