Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 695-930-2 | CAS number: 13676-53-4
Boiling point
Administrative data
Link to relevant study record(s)
- Endpoint:
- boiling point
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-03-14 to 2017-05-16
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 103 (Boiling Point)
- Version / remarks:
- adopted 27 July 1995
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.2 (Boiling Temperature)
- Version / remarks:
- 30 May, 2008
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- differential scanning calorimetry
- Key result
- Decomposition:
- yes
- Remarks:
- as indicated by one sharp peak at 250°C
- Decomp. temp.:
- > 250 °C
- Remarks on result:
- other: Partial decomposition and possible boiling thereafter; due to incomplete mass loss no boiling point was detected
- Conclusions:
- In the present study according to OECD Guideline 103, the test item is considered to decompose before boiling.
Reference
Preliminary test:
Three steps were registered with maxima at 120 °C, 270 °C resp. 470 °C. A total mass loss of 53.2 % at the final temperature could be observed (mass change in the range until 180 °C: 0.9 %; mass change in the range from 180 to 360 °C: 2.0 %, mass change in the range from 360 °C to 600 °C: 50.4 %;). No significant mass loss occurred due to purging.
Main test:
The DSC measurements were performed twice in the temperature range from 20 - 600 °C resp. from 20 - 350 °C.
Upon further heating, i.e. above the melting point, the DSC-curve showed two more peaks: one exothermic peak (peak maximum: 250 °C/ 251 °C) followed by an endothermic peak (peak maximum: 471 °C).
The first one is probably due to exothermic decomposition after melting. The second one may be a result of a partial boiling of the decomposed test item.
Due to the fact that the thermogravimetric measurement as well as the DSC-measurement did not show a complete mass loss in that temperature range, no normal boiling point could be observed.
Description of key information
- OECD 103 guideline study, GLP, test item decomposes, no Boiling Point determinable.
Key value for chemical safety assessment
Additional information
In the present study according to OECD Guideline 103, the test item is considered to decompose before boiling.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
