Registration Dossier

Diss Factsheets

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point of flammable liquids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Completed on 26 March 2018
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study without detailed documentation
Qualifier:
according to guideline
Guideline:
EU Method A.9 (Flash-Point)
Deviations:
no
Qualifier:
according to guideline
Guideline:
ISO 3679 (Determination of flash point - Rapid equilibrium closed cup method)
Deviations:
no
GLP compliance:
not specified
Type of method:
closed cup
Flash point apparatus:
other: Normlab Flash Point – NPV 310 Model
Key result
Flash point:
168 °C
Atm. press.:
1 007.8 hPa

Measurement 1: 168 °C

Measurement 2: 168 °C

Measurement 3: 168 °C

Mean value: 168 °C

Interpretation of results:
other: Not classified in accordance with EU Criteria.
Conclusions:
Under the conditions of this study the flash point of the test material was 168 °C.
Executive summary:

The flash point of the test material was investigated in accordance with the standardised guidelines EU Method A.9 and ISO 3679.

The Normlab Flash Point NPV 310 Model was used to perform three replicate tests using the test material to calculate a mean value. The test material was heated at 1 °C/minute at 1007.8 hPa.

Under the conditions of this study the flash point of the test material was 168 °C.

Description of key information

Under the conditions of the study the flash point of the test material was 168 °C.

Key value for chemical safety assessment

Flash point at 101 325 Pa:
168 °C

Additional information

The flash point of the test material was investigated in accordance with the standardised guidelines EU Method A.9 and ISO 3679. The study was awarded a reliability score of 2 in accordance with the criteria set forth by Klimisch et al. (1997).

The Normlab Flash Point NPV 310 Model was used to perform three replicate tests using the test material to calculate a mean value. The test material was heated at 1 °C/minute at 1007.8 hPa.

Under the conditions of this study the flash point of the test material was 168 °C.