Registration Dossier

Administrative data

First-aid measures

If inhaled:Remove from exposure site to fresh air and keep at rest. If victim is unconscious, remove foreign bodies from the mouth. If victim has stopped breathing, give artificial respiration. Obtain medical advice.
In case of skin contact:Remove contaminated clothes. Wash thoroughly with water (and soap). Contact physician if symptoms persist.
In case of eye contact:Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist.
If swallowed:Rinse mouth with water and obtain medical advice.
Most important symptoms and effects, both acute and delayed
Symptoms:No information available.
Risks:No information available.
Indication of any immediate medical attention and special treatment needed
Treatment:No information available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:Carbondioxide, dry chemical, foam.
Unsuitable extinguishing media:Do not use a direct waterjet on burning material.
Special hazards arising from the substance or mixture
Specific hazards during firefighting:Water may be ineffective.
Advice for firefighters
Further information:Standard procedure for chemical fires.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:Avoid inhalation and contact with skin and eyes. A self-contained breathing apparatus is recommended in case of a major spill.
Environmental precautions:Keep away from drains, surface- and groundwater and soil.
Methods and materials for containment and cleaning up
Methods for cleaning up:Clean up spillage promptly. Remove ignition sources. Provide adequate ventilation or exhaust. Avoid excessive inhalation of dust and vapours. Contain and recover free product. Dispose of according to the local regulations.
Prevent spreading over a wide area (e.g. by containment or oil barriers).

Handling and storage

Precautions for safe handling
Advice on safe handling:Avoid excessive inhalation of concentrated vapors. Follow good manufacturing practices for housekeeping and personal hygiene. Wash any exposed skin immediately after any chemical contact, before breaks and meals, and at the end of each work period. Contaminated clothing and shoes should be thoroughly cleaned before re-use.
If appropriate, procedures used during the handling of this material should also be used when cleaning equipment or removing residual chemicals from tanks or other containers, especially when steam or hot water is used, as this may increase vapor concentrations in the workplace air. Where chemicals are openly handled, access should be restricted to properly trained employees.
Keep all heated processes at the lowest necessary temperature in order to minimize emissions of volatile chemicals into the air.
Advice on protection against fire and explosion:Keep away from ignition sources and naked flame.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:Store in a cool, dry, ventilated area away from heat sources. Keep containers upright and tightly closed when not in use.
Specific end use(s)
Specific use(s):No information available.

Transport information

Land transport (ADR/RID)

UN number:
Not applicable: Not dangerous goods
Proper shipping name and description:
Not applicable: Not dangerous goods
Language:
English
Class:
Not applicable: Not dangerous goods
Classification code:
Not applicable: Not dangerous goods
Packaging group:
Not applicable: Not dangerous goods
Labels:
Not applicable: Not dangerous goods
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable: Not dangerous goods
Proper shipping name and description:
Not applicable: Not dangerous goods
Language:
English
Class:
Not applicable: Not dangerous goods
Classification code:
Not applicable: Not dangerous goods
Packaging group:
Not applicable: Not dangerous goods
Labels:
Not applicable: Not dangerous goods
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable: Not dangerous goods
Proper shipping name and description:
Not applicable: Not dangerous goods
Class:
Not applicable: Not dangerous goods
Packaging group:
Not applicable: Not dangerous goods
EmS code:
Not applicable: Not dangerous goods
Labels:
Not applicable: Not dangerous goods
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable: Not dangerous goods
Proper shipping name and description:
Not applicable: Not dangerous goods
Class:
Not applicable: Not dangerous goods
Packaging group:
Not applicable: Not dangerous goods
Labels:
Not applicable: Not dangerous goods
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Engineering measures
Where appropriate, use closed systems to transfer and process this material.
If appropriate, isolate mixing rooms and other areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the rest of the plant.
Personal protective equipment
Respiratory protection:Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce possible worker exposures.
No respiratory protection is required during normal operations in a workplace where engineering controls such as adequate ventilation, etc. are sufficient.
If engineering controls and safe work practices are not sufficient, an approved, properly fitted respirator with organic vapor cartridges or canisters and particulate filters should be used:
a)while engineering controls and appropriate safe work practices and/or procedures are being implemented; or
b)during short term maintenance procedures when engineering controls are not in normal operation or are not sufficient; or
c)if normal operational workplace vapor concentration in the air is increased due to heat ;
d)during emergencies; or
e)if engineering controls and operational practices are not sufficient to reduce airborne concentrations below an established occupational exposure limit.
Hand protection:Avoid skin contact. Use chemically resistant gloves.
Eye protection:Use tight-fitting goggles, face shield or safety glasses with side shields if eye contact might occur.
Hygiene measures:To the extent deemed appropriate, implement pre-placement and regularly scheduled ascertainment of symptoms and spirometry testing of lung function for workers who are regularly exposed to this material.
To the extent deemed appropriate, use an experienced air sampling expert to identify and measure volatile chemicals that could be present in the workplace air to determine potential exposures and to ensure the continuing effectiveness of engineering controls and operational practices to minimize exposure.
Environmental exposure controls
General advice:Keep away from drains, surface- and groundwater and soil.

Stability and reactivity

Reactivity
No hazards to be specially mentioned.
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
Hazardous reactions:Note: Presents no significant reactivity hazard, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidizing agents.
Conditions to avoid:Direct sources of heat.
Incompatible materials
Materials to avoid:Avoid contact with strong acids, alkali or oxidizing agents.
Hazardous decomposition products:Carbon monoxide and unidentified organic compounds may be formed during combustion.

Disposal considerations

Waste treatment methods
Product:Dispose of according to local regulations. Avoid disposing into drainage systems and into the environment.
Contaminated packaging:Empty containers should be taken to an approved waste handling site for recycling or disposal.