Registration Dossier

Administrative data

First-aid measures

- General information: Remove/Take off immediately all contaminated clothing.
- After inhalation: If inhaled, remove to fresh air; Get medical advice/ attention.
- After contact with skin: In case of contact, immediately flush skin with soap and plenty of water.
- After contact with eyes: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- After ingestion: If swallowed, seek medical advice immediately and show this container or label; Do NOT induce vomiting.
- Most important symptoms and effects, both acute and delayed:
Symptoms: No symptoms known currently.
Hazards: No hazards known at this time.
- Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.

Fire-fighting measures

- Suitable extinguishing media: Water spray jet; Foam; Carbon dioxide (CO2); Dry powder
- Special hazards arising from the substance or mixture: In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO); Nitrogen oxides (NOx); Hydrogen chloride
- Advice for firefighters:
Special protective equipment for firefighting: Self-contained breathing apparatus; Wear suitable protective equipment.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures: Wear suitable protective equipment.
- Environmental precautions: Do not allow to enter drains or waterways
- Methods and material for containment and cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
- Information regarding Safe handling, see below section on 'Handling and storage'.
- For personal protection, see below section on exposure controls/personal protection.
- Information regarding Waste Disposal, see below section on 'Disposal considerations'.

Handling and storage

Precautions for safe handling
- Advice on safe handling: Handle and open container with care.
- Hygiene measures:
- Wash hands before breaks and at the end of workday.
- Use protective skin cream before handling the product.
- Take off immediately all contaminated clothing and wash it before reuse.
- Advice on protection against fire and explosion: Observe the general rules of industrial fire protection

Conditions for safe storage, including any incompatibilities
- Requirements for storage areas and containers: Do not use steel containers.
- Further information on storage conditions:
- sensitive to frost
- In case of the product becoming opaque, thickening or being frozen due to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use.

Transport information

Land transport (ADR/RID)

UN number:
UN 1760
Proper shipping name and description:
Corrosive liquid, n.o.s
Chemical name:
Cocosalkyltrimethylammonium chloride
Language:
English
Class:
8
Packaging group:
II
Special Provisions:
environmentally hazardous
Remarks:
Shipment permitted

Inland waterway transport (ADN(R))

UN number:
UN 1760
Proper shipping name and description:
Corrosive liquid, n.o.s
Chemical name:
Cocosalkyltrimethylammonium chloride
Language:
English
Class:
8
Packaging group:
II
Remarks
Environment hazard: Special marking provision: environmentally hazardous
Shipment permitted

Marine transport (IMDG)

UN number:
UN 1760
Proper shipping name and description:
Corrosive liquid, n.o.s
Chemical name:
Cocosalkyltrimethylammonium chloride
Class:
8
Packaging group:
II
EmS code:
F-A S-B
Remarksopen allclose all
Shipment permitted
Marine pollutant = true

Air transport ICAO/IATA

UN number:
UN 1760
Proper shipping name and description:
Corrosive liquid, n.o.s
Chemical name:
Cocosalkyltrimethylammonium chloride
Class:
8
Packaging group:
II
Remarks
Environment hazard: Special marking provision: environmentally hazardous
Shipment permitted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
- General protective measures
- Avoid contact with skin.
- Avoid contact with eyes.
- Respiratory protection:
- Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
- Full mask to standard DIN EN 136
- Filter A (organic gases and vapours) to standard DIN EN 141
- The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.
- Hand protection :
- Long-term exposure
- Impervious butyl rubber gloves
- Minimum breakthrough time / gloves : 480 min
- Minimum thickness / gloves 0,7 mm
- For short-term exposure (splash protection):
- Nitrile rubber gloves.
- Minimum breakthrough time / gloves : 30 min
- Minimum thickness / gloves 0.4 mm
- These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
- Eye protection :
- Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)
- Body protection :
- Depending on the degree of hazard, when handling corrosive substances, aprons, boots or full protective clothing made of suitable materials (e.g. rubberized or PVC-coated) must also be worn.

Stability and reactivity

- Reactivity: See below section: "Possibility of hazardous reactions"
- Chemical stability: table under normal conditions.
- Possibility of hazardous reactions: Corrodes aluminium.
- Conditions to avoid: None known.
- Incompatible materials: not known
- Hazardous decomposition products: When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

- Waste treatment methods: In accordance with local authority regulations, take to special waste incineration plant
- Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste