Registration Dossier

Administrative data

First-aid measures

The manufacturing/use of the registered substance fulfils strictly controlled conditions. Therefore, no exposure of man or the environment is expected. In the case of accidental exposure, the following measures should be taken (as reported by the Safety Data Sheet):
Eye contact
- rinse immediately with tap water for 10 minutes - open eyelids forcibly
- consult a physician
Skin contact
- remove contaminated clothing immediately and drench affected skin with plenty of water
- consult physician
Inhalation
- remove the casualty to fresh air and keep him/her calm
- in the event of symptoms get medical treatment
Note to physician
- treat symptomatically

Fire-fighting measures

Suitable extinguishing media
- water spray jet, dry powder, foam, carbon dioxide
Specific hazards
- heating of container(s) will cause pressure rise with risk of bursting and subsequent explosion
- may form explosive mixture with air at elevated ambient temperature
- Material is combustible
Protection of fire-fighters
- precipitate gases/vapours/mists with water spray
Special method of fire-fighting
- cool endangered containers with water spray

Accidental release measures

The manufacturing/use of the registered substance fulfils strictly controlled conditions. Therefore, no exposure of man or the environment is expected. In the case of accidental exposure, the following measures should be taken (as reported by the Safety Data Sheet):
Personal precautions
- do not use tools which produce sparks, make use of explosion proof equipment
- if this does not endanger the action force or other people, air sewers and cellars
Environmental protection
- if possible close leaks
- do not allow to enter drains or waterways
- if the substance reaches waters or the sewer system, inform the competent authority
Methods for cleaning up
- collect liquid by means of sand, earth or another suitable material or cover it with foam
- during the pouring by a pump bear in mind adequate earthing
- collect the product spilled out into ventilated containers equipped with absorption filters

Handling and storage

Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- take precautionary measures against electrostatic charging
- local exhaust ventilation necessary

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
not classified by transport regulations

Marine transport (IMDG)

Remarks
not classified by transport regulations

Air transport ICAO/IATA

Remarks
not classified by transport regulations

Additional transport information

Additional transport information
not classified by transport regulations

Exposure controls / personal protection

Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- take precautionary measures against electrostatic charging
- local exhaust ventilation necessary

Personal protective equipment
Respiratory protection
- in case of open handling or accidental release: respirator with independent air supply or protective mask with combined filter
Hand protection
- protective gloves (eg made of neoprene, nitrile or butyl rubber)
Eye protection
- safety glasses

Stability and reactivity

Please note, with only small amounts of a highly flammable solvent the flash point drops significantly to the region of this solvent!

Disposal considerations

Waste from residues
- observe local/national regulations regarding waste disposal
- incinerate in qualified installation with flue gas scrubbing