Registration Dossier

Administrative data

First-aid measures

After inhalation:
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
In case of unconsciousness, place the victim in recovery position and call medical assistance.
If breathing is difficult, immediately call medical assistance. Give oxygen or artificial respiration.

After skin contact:
IF ON SKIN: Wash with plenty of soap and water for 15 minutes.
Take off contaminated clothing and wash it before reuse.
If skin irritation occurs: Get medical advice/attention.

After eyes contact:
IF IN EYES: Rinse cautiously with water for 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.

After ingestion:
Call medical assistance.
Never induce vomiting an unconscious person to avoid any respiratory tracts obstruction. In this case, place the person in recovery position and keep warm until the arrival of the medical assistance.
If person is conscious, rinse out mouth with water.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media: Water spray, carbon dioxide, dry chemical powder or polymer foam.
Unsuitable extinguishing media: Water jet

Special hazards arising from the substance or mixture:
Substance is lightly flammable. However, in a fire, it can decompose, giving off toxic fumes of carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx).

Advice for firefighters / responders:
Firefighting responders should equip themselves with a complete body and heat resistant protective equipment and self contained breathing apparatus (EN 137 / EN 14593 / EN 14594).
Water should be applied to cool containers of the substance that are exposed to flames.
Keep run-off water out of sewers and water sources.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Ventilate contaminated area.
Avoid contact with the released substance.
Avoid inhalation.
Remove from spill site any person whose presence is not necessary. Keep upwind.
The others should wear protective cloth, breathing apparatus, chemical safety goggles, rubber boots and rubber gloves.

Environmental precautions:
Shut off leaks if without risk. Prevent liquid from entering the environment.
Do not flush spill area with plenty of water before picking-up, to avoid contamination of the watercourses and low areas.

Methods and materials for containment and cleaning up:
Pump the largest quantity of spilled product in a drum (use an explosion proof pump). This product should be disposed.
Absorb the last traces of liquid on sand or vermiculite and place in tightly closed and labelled drums/containers for disposal.
Collect spilled solid material in tightly closed and well-labelled container. This material should be retreated or disposed.
Wash spill site with plenty of water after material pickup is complete.

Handling and storage

Precautions for safe handling:
Handle and use only in well-ventilated areas.
Safety shower and eyewash fountain should be available.
Avoid contact with skin, eyes and clothes.
Avoid inhalation.
Avoid repeated or prolonged exposure.
Wash thoroughly after handling this substance. Keep apart working clothes.

Conditions for safe storage, including any incompatibilities:
Technical measures: The ground of the storage area must be waterproof and form retention basin.
Storage conditions: Keep containers tightly closed. Store in a cool, dry and well-ventilated area. The substance is hygroscopic.

Incompatible materials: Keep away from oxidising agents or strong bases.

Transport information

Land transport (ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Class:
Not regulated
Classification code:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Class:
Not regulated
Classification code:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Class:
Not regulated
Packaging group:
Not regulated
EmS code:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Class:
Not regulated
Packaging group:
Not regulated
Labels:
Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical protection measures:
The use of local exhaust is recommended to avoid vapour emissions.

Eye protection:
Chemical safety goggles with side shields (EN 166)

Body protection / Skin protection:
Suitable protective body clothing (EN 14605 in case of splashes)

Hand protection:
In case of limited contact or for a protection against splashes: gloves with minimum protection index of 2 (permeation time > 30 min according to EN 374-3): nitrile rubber, PVC
In case of direct prolonged exposure: gloves with minimum protection index of 4 (permeation time > 120 min according to EN 374-3): butyl rubber, PVC

Respiratory protection:
Respirator (EN 140 / EN 136) with filter (EN 14387/A1 – Type A) when risk of inhalation.
Self-contained breathing apparatus (EN 137 / EN 14593 / EN 14594) in case of important risk or prolonged exposure, for example in case of fire fighting.

Stability and reactivity

Reactivity: No data available.

Chemical Stability: The substance is stable at room temperature and under normal storage and handling conditions

Possibility of hazardous reactions: No dangerous reaction has been identified.

Conditions to avoid: Avoid wet or humid conditions.

Incompatible materials: Strong oxidizing agents and strong bases.

Hazardous decomposition products: toxic fumes of carbon oxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx).
Decomposition in water: not concerned.

Disposal considerations

Waste treatment methods:
Product residues: Do not reject in natural environment.
Dissolve or mix with a combustible solvent and burn in an adequate incinerator.

Contaminated packaging: Empty containers/drums should be handled with the same precautions than the full ones.
Contaminated packaging have to be disposed in a site approved for chemical and hazardous waste or burned in a specialised burning centre.