Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information
When in doubt or if symptoms are observed, get medical advice. If unconscious place in recovery position and seek
medical advice.
After inhalation
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial
In case of skin contact
Wash immediately with: Water. Do not wash with: Solvents/Thinner. In case of skin reactions, consult a physician.
After eye contact
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an
ophthalmologist immediately.
After ingestion
Do not induce vomiting. Keep at rest. Call a physician immediately.
Self-protection of the first aider
No mouth-to-mouth or mouth-to-nose resuscitation. Use Ambu bag or ventilator.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Alcohol resistant foam. Carbon dioxide (CO2). Dry extinguishing powder. Water mist
Unsuitable extinguishing media
High power water jet.
Special hazards arising from the substance or mixture
Hazardous combustion products
In case of fire may be liberated: Carbon monoxide (CO). Carbon dioxide (CO2). Sulphur oxides (SOx). Hydrogen fluoride (HF).
Advice for firefighters
In case of fire: Wear self-contained breathing apparatus.
Special protective equipment for firefighters
In case of fire: Wear self-contained breathing apparatus.
Additional information
Burning produces heavy smoke. Do not allow run-off from fire-fighting to enter drains or water courses.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid generation of dust. Remove all sources of ignition. Provide adequate ventilation.
Environmental precautions
Do not allow to enter into surface water or drains.
Methods and material for containment and cleaning up
For cleaning up
Take up mechanically. Avoid generation of dust. Collect in closed and suitable containers for disposal. Clean with detergents. Avoid solvent cleaners

Handling and storage

Protective measures
All work processes must always be designed so that the following is excluded: inhalation of dust/particles, skin contact,eye contact, generation/formation of dust. Only use the material in places where open light, fire and other flammable sources can be kept away. After use replace the closing cap immediately. Wear personal protection equipment. Use only in well-ventilated areas.
Fire prevent measures
Keep away from sources of ignition - No smoking. Dust can form an explosive mixture with air. Take precautionary measures against static discharges.
Measures to prevent aerosol and dust generation
Provide adequate ventilation as well as local exhaustion at critical locations.
Conditions for safe storage, including any incompatibilities
Requirements for storage rooms and vessels
Keep container tightly closed. Ensure adequate ventilation of the storage area. Restrict access to stockrooms.
Hints on storage assembly
Storage class : 13
Keep away from
Strong acid. Strong alkali. Oxidising agent.
Further information on storage conditions
Keep only in the original container in a cool, well-ventilated place.
Protect against : Heat. UV-radiation/sunlight. Humidity.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
No dangerous good in sense of transport regulation.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
No dangerous good in sense of transport regulation.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
No dangerous good in sense of transport regulation.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
No dangerous good in sense of transport regulation.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eye / face protection
Eye glasses with side protection
Do not wear contact lenses.

Skin protection
Hand protection
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place
concentration and quantity of hazardous substances.
Required properties : Antistatic, dust-tight.
Additional hand protection measures : Check leak tightness / impermeability prior to use. Do not wear gloves
near rotary machines and tools. Use gloves only once.
Remark : For special purposes, it is recommended to check the resistance to chemicals of the protective gloves
mentioned above together with the supplier of these gloves.

Body protection
For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working
Suitable protective clothing : Overall.
Required properties : Antistatic.
Remark : Only wear fitting, comfortable and clean protective clothing. Barrier creams are not substitutes for body

Respiratory protection
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Respiratory protection necessary at: exceeding exposure limit values, handling larger quantities, dust formation.
The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that
may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be

General health and safety measures
Wash hands before breaks and after work. When using do not eat, drink, smoke, sniff. Wash contaminated clothing
prior to re-use. Thorough skin-cleansing after handling the product.

Additional information
Preventive industrial medical examinations are to be offered.

Stability and reactivity

No information available.
Chemical stability
No information available.
Possibility of hazardous reactions
No information available.
Conditions to avoid
Stable under recommended storage and handling conditions.
Incompatible materials
Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.
Hazardous decomposition products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and
dioxide, smoke, oxides of nitrogen.

Disposal considerations

Waste treatment methods
Product/Packaging disposal
Waste treatment options
Appropriate disposal / Product
Waste disposal according to EC directives 75/442/EEC and 91/689/EEC in the corresponding versions, covering
waste and dangerous waste.
Appropriate disposal / Package
Contaminated packages must be completely emptied and can be re-used following proper cleaning. Handle
contaminated packages in the same way as the substance itself.