Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
For emergency responders: Use personal protection recommended in Section 8
- General information:
Immediately remove any clothing soiled by the product.
Take affected persons out into the fresh air.
Seek immediate medical advice.
- After inhalation:
In case of unconsciousness place patient stably in side position for transportation.
Provide oxygen treatment if affected person has difficulty breathing.
If not breathing, give artificial respiration.
- After skin contact: After contact with skin, wash immediately almost 15 minutes with plenty of water.
- After eye contact: Rinse opened eye for almost 15 minutes under running water.
- After swallowing: Rinse mouth out with water.

Most important symptoms and effects, both acute and delayed
For more information on the consequences in terms of health, refer to Section 11

Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Emergency equipment Provide wash facilities for eyes and skin near work area.

Fire-fighting measures

Extinguishing media
- Suitable extinguishing agents:
Carbon dioxide, dry chemicals, foam, water spray (mist).
Use fire extinguishing methods suitable to surrounding conditions.

Special hazards arising from the substance or mixture
High temperatures may liberate toxic or corrosive gases. Do not breathe smoke or vapours.

Advice for firefighters
- Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
For emergency responders: Use personal protection recommended in Section 8

Environmental precautions: No special measures required.

Methods and material for containment and cleaning up:
Residue may be washed down with water.
Pick up mechanically.
May require excavation of contaminated soil. Shovel up residues and place in a labelled sealable container for
subsequent safe disposal. Put leaking container into a labelled drum or overdrum.
Methods for Containment: Contain the spill or leak if it can be done safely.

Handling and storage

Precautions for safe handling
Handle in accordance with good industrial hygiene and safety procedures.
Avoid contact with the eyes and skin.
- Information about fire - and explosion protection: No special measures required.

Conditions for safe storage, including any incompatibilities
- Storage:
- Requirements to be met by storerooms and receptacles:
Store in dry, cool, well-ventilated area.
Mechanical ventilation is recommended.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions:
Keep container tightly sealed.
Open receptacle only under localised extractor facilities.

Specific end use(s) No further relevant information available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
- Ingredients with limit values that require monitoring at the workplace: Not required.
- Additional information: The lists valid during the making were used as basis.

Exposure controls
- Personal protective equipment:
- General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
- Respiratory protection: Use suitable respiratory protective device in case of insufficient ventilation.
- Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
- Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
- Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
- For the permanent contact gloves made of the following materials are suitable:
Material of gloves : LLDPE (under gloves)
Thickness : 0.062 mm
Breakthrough Time : > 480’
- Not suitable are gloves made of the following materials:
Material of gloves : PVC
Thickness : : 1.35 mm
Breakthrough Time : < 10’

- Eye protection:
Tightly sealed goggles

- Body protection:
Use protective suit.
Personal protective equipment for the body should be selected based on the task being performed and the risks
involved. It is recommended to be approved by a specialist before handling.

Limitation and supervision of exposure into the environment
Air emissions should be treated by systems of purification and controlled according to the characteristics of
the product. (VOCs, Acidity, Other)
Air emissions should be treated by systems of purification and controlled according to the characteristics of
the product. (VOCs, Acidity, Other)

Stability and reactivity

10.1 Reactivity No further relevant information available.
- 10.2 Chemical stability
- Thermal decomposition / conditions to be avoided: Stable under normal conditions of use.
- 10.3 Possibility of hazardous reactions No dangerous reactions known.
- 10.4 Conditions to avoid No further relevant information available.
- 10.5 Incompatible materials:
Reacts with oxidising agents.
Avoid contact with metals.
Reacts with strong alkali.
- 10.6 Hazardous decomposition products:
Halogenated compounds.
Hydrogen bromide
Carbon monoxide and carbon dioxide

Disposal considerations

Waste treatment methods
- Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- European waste catalogue
HP 4 Irritant - skin irritation and eye damage
- Uncleaned packaging:
- Recommendation: Disposal must be made according to official regulations.