Registration Dossier

Administrative data

First-aid measures

DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Rinse immediately with plenty of water for at least 15 minutes.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Material is not expected to be harmful by ingestion. No specific first aid measures are required.
Inhalation:
Material is not expected to be harmful if inhaled. Remove to fresh air.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Fire-fighting measures

EXTINGUISHING MEDIA
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Dust may be explosive if mixed with air in critical proportions and in the presence of a source of ignition.
ADVICE FOR FIREFIGHTERS
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Environmental Precautions:
None known
Methods and material for containment and cleaning up:
Sweep up into containers for disposal. Flush spill area with water. Dust deposits should not be allowed to accumulate on
surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING
Precautionary Measures: Contains finely divided material. Dust suspended in air may ignite with static discharge,
sparks or flame. Equipment, including venting systems, should be grounded. Provide adequate ventilation in areas
of use to remove dust.
Special Handling Statements: Maintain good housekeeping to control dust accumulations. DUST EXPLOSION
HAZARD CLASS - 3. Dry powders can build static electricity charges when subjected to the friction of transfer and
mixing operations. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres.
Handling of material should be in accordance with standards for venting of deflagrations (e.g. NFPA-68). If handled
with flammable or combustible materials the explosion hazard may increase.
Conditions for safe storage, including any incompatibilities:
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
Storage Class (TRGS 510): 11

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

CONTROL PARAMETERS
No OEL values have been established.
EXPOSURE CONTROLS
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended.
Eye protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact.
Wear impermeable gloves.
Hand protection:
Nitrile or fluorinated rubber gloves. Consider the porosity and elasticity data of the glove manufacturer and the
specific conditons in the work place. Replace gloves immediately when torn or any change in appearance
(dimension, colour, flexibility etc) is noticed.
The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves
need to be changed when in contact with chemicals.
Due to many conditions (e.g. temperature, abrasion) the practical usage of a chemical protective glove in practice
may be much shorter than the permeation time determined through testing.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Stability and reactivity

Reactivity: No information available
CHEMICAL STABILITY
Stability: Stable
Conditions To Avoid: None known
POSSIBILITY OF HAZARDOUS REACTIONS
Polymerization: Will not occur
Conditions To Avoid: None known
Incompatible materials: Strong oxidizing agents.
Hazardous Decomposition
Products:
Carbon dioxide
Carbon monoxide (CO)

Disposal considerations

Waste Treatment Methods
The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary, The
Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal
treatment or incineration at approved facilities. All local and national regulations should be followed.