Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 242-684-5 | CAS number: 18933-33-0
Guidance on Safe Use
Administrative data
First-aid measures
- Description of first aid measures:
EYES: Remove any contact lenses, if present. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. If problem persists, seek medical advice
SKIN: Remove contaminated clothing. Wash immediately with plenty of water. If irritation persists, get medical advice/attention. Wash contaminated clothing before using it again.
INHALATION: Remove to open air. In the event of breathing difficulties, get medical advice/attention immediately.
INGESTION: Get medical advice/attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person, unless authorised by a doctor.
- Most important symptoms and effects, both acute and delayed:
Specific information on symptoms and effects caused by the product are unknown.
Indication of any immediate medical attention and special treatment needed:
Information not available.
Fire-fighting measures
- EXTINGUISHING MEDIA
SUITABLE EXTINGUISHING EQUIPMENT
The extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray.
UNSUITABLE EXTINGUISHING EQUIPMENT
None in particular.
- Special hazards arising from the substance or mixture.
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products. The product is combustible and, when the powder is released into the air in sufficient concentrations and in the presence of a source of ignition. It can create explosive mixtures with air. Fires may start or get worse by leakage of the solid product from the container, when it reaches high temperatures or through contact with sources of ignition.
- Advice for firefighters.
GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).
Accidental release measures
- PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
If there are no contraindications, spray powder with water to prevent the formation of dust.
Wear suitable protective equipment (including personal protective equipment referred below) to prevent any contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
HAND PROTECTION
In the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374).
Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivity reactions.
SKIN PROTECTION
Wear category II professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.
EYE PROTECTION
Wear airtight protective goggles (see standard EN 166).
In the presence of risks of exposure to splashes or squirts during work, adequate mouth, nose and eye protection should be used to prevent accidental absorption.
RESPIRATORY PROTECTION
Use a type P filtering facemask (see standard EN 149) or equivalent device, whose class (1, 2 or 3) and effective need, must be defined according to the outcome of risk assessment.
- ENVIRONMENTAL PRECAUTIONS:
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
- METHODS AND MATERIAL FOR CONTAINTMENT AND CLEANING UP
Collect the leaked product and place it in containers for recovery or disposal. If the product is flammable, use explosion-proof equipment. If there are no contraindications, use jets of water to eliminate product residues.
Make sure the leakage site is well aired. Evaluate the compatibility of the container to be used, by checking "Stability and reactivity" section information. Contaminated material should be disposed of in compliance with the provisions set forth in point "Disposal Considerations".
Handling and storage
- PRECAUTIONS FOR SAFE HANDLING:
Before handling product consult all other sections of the safety data sheet. Avoid dispersal of the product in the environment. Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which peopkle eat.
- CONDITIONS FOR SAFE STORAGE, INCLUDING INCOMPATIBILITIES.
Store only in the original container. Store the containers sealed, in a well ventilated place, away from direct sunlight. Keep containers away from any incompatible materials, see "Stability and reactivity"section for details.
- SPECIFIC END USE:
Information not available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- N.A.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- N.A.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- N.A.
Shipping information
- Proper shipping name and description:
- N.A.
- Chemical name:
- N.A.
- Labels:
- N.A.
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- N.A.
Shipping information
- Proper shipping name and description:
- N.A.
- Chemical name:
- N.A.
- Labels:
- N.A.
Remarksopen allclose all
Additional transport information
Additional information
- Special provisions / remarks / other:
- The product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.
Exposure controls / personal protection
We declare that the substance is manufactured and used under strictly controlled conditions during its whole lifecycle as described under Article 18(4) and Section 2.1 of the Guidance for intermediates. We have received confirmation from the user that the synthesis of the other substance from this intermediate takes place under strictly controlled conditions during its whole lifecycle as described under Article 18(4) and Section 2.1 of the Guidance for intermediates.
Effectivenes:
Prevention of exposure since the substance is rigorously contained by means during its whole lifecycle and procedural and control technologies are used to minimise emission and any resulting exposure as described under Article 18(4).
- Personal protection
HAND PROTECTION
In the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374).
Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivity reactions.
SKIN PROTECTION
Wear category II professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.
EYE PROTECTION
Wear airtight protective goggles (see standard EN 166).
In the presence of risks of exposure to splashes or squirts during work, adequate mouth, nose and eye protection should be used to prevent accidental absorption.
RESPIRATORY PROTECTION
Use a type P filtering facemask (see standard EN 149) or equivalent device, whose class (1, 2 or 3) and effective need, must be defined according to the outcome of risk assessment.
Stability and reactivity
- Reactivity.
There are no particular risks of reaction with other substances in normal conditions of use.
- Chemical stability.
The product is stable in normal conditions of use and storage.
- Possibility of hazardous reactions.
The powders are potentially explosive when mixed with air.
- Conditions to avoid.
Avoid environmental dust build-up.
- Incompatible materials.
Information not available.
- Hazardous decomposition products
Information not available.
Disposal considerations
- WASTE TREATMENT METHODS
Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
- CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
