Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Contact with skin
Rinse skin with plenty of water with soap for at least 10 minutes
having removed contaminated shoes and clothing. Wash clothes
before wearing again. Consult a physician.

Contact with eyes
Rinse immediately eyes with plenty of water for at least 15
minutes; lift upper and lower eyelids from time to time. Consult
an ophthalmologist.

Do not induce vomiting. Wash out mouth with plenty of water. Do
not give someone who is unconscious anything to swallow.
Consult a physician.

Remove to fresh air, away from exposed locations. If breathing
becomes difficult, trained personnel should administer oxygen. If
not breathing give artificial respiration. Consult a physician.

Fire-fighting measures

Suitable extinguishing media
Water spray, chemical powder or foam, carbon dioxide

Unsuitable extinguishing media

Special hazards arising from the substances
Can release hazardous products in the event of fire (Carbon oxides, nitrogen oxides)

Advice for fire-fighters / Protective measures
Wear a self-contained high-pressure respirator. Avoid contaminating the environment with fire-fighting waste

Accidental release measures

Personal precautions, protective equipment and emergency procedures
see Precaution for handling
Wear the personal protective gear defined below

Environmental precautions
Do not dispose of down drains or into the environment.

Methods and material for containment and cleaning up
Mechanically recovered product, re-packaged into suitable and sealed containers. Avoid dust-producing conditions

Handling and storage

Precautions for safe handling
Avoid inhalation, contact with eyes, skin and clothing. Adequate ventilation of premises. Wear suitable personal protection gear. Avoid dust-producing conditions Wash after handling.

Fire and explosion prevention
Take all measures necessary to prevent built up of static electricity and the production of sparks or hot points during handling.

Conditions for safe storage, including any incompatibilities
Store in a dry place and corrosives area, at room temperature but protected from excessive temperature. Keep container tightly closed in a dry and well-ventilated place away from incompatible substances.
Any opened packaging must be carefully closed and stored upright.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3263
Shippingopen allclose all
8 Corrosive solide
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3263
Shipping information
Proper shipping name and description:
Corrosive solide, basic, organic, n.o.s
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Hazardous substance
Code restriction de Tunnel : E

Exposure controls / personal protection

Control parameters (limits values)
No data available

Exposure controls:
Industrial hygiene. Keep area well ventilated. Eye rinsing facilities and safety showers must be installed close to all sources of potential

Personal protective equipment
• Respiratory protection Wearing of a suitable mask (EN136) with P3-type filter (EN143)
• Protection of hands Wearing of suitable protective gloves (EN374)
• Eye protection Wearing of suitable safety glasses (EN166)
• Protection of skin and body
other than hands
Wear suitable protective clothing to avoid skin contact.
(category III, type 5 protective overalls)
• Thermal hazards NA

Stability and reactivity

No data available

chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
No data available.

Conditions to avoid
Excess heat, incompatible materials, dust condition.

Incompatibles materials
Strong oxidising agents.

Hazardous decompositionproducts
Carbon oxides, carbon monoxide, nitrogen oxides

Disposal considerations

Have destroyed by an authorised specialist company.
Incineration recommended Contaminated packaging should be considered hazardous waste.
They must be disposed of in compliance with current regulations.