Registration Dossier

Diss Factsheets

Physical & Chemical properties

Endpoint summary

Administrative data

Description of key information

Additional information

Appearance

The substance is a dark yellow viscous liquid with no reported odour.

 

Pour point

The pour point of the test item was determined to be 15 ± 3°C (288 ± 3 K) (OECD 201 and EU Method A.1).

 

Boiling point

The boiling temperature of the test item was determined to be from 190°C (463K) at 102 kPa. The test item had a broad boiling range with an extrapolated onset of approximately 245 °C (518 K). (OECD 103 and EU Method A.2).

 

Relative density

The density of the test item has been determined to be 938 kg/m3 at 20.0 ± 0.5°C, with a relative density of 0.938 (OECD 109 and EU Method A.3).

 

Granulometry

This study has been omitted in accordance with Column 2 of Annex VII Section 7.14. The substance is not marketed or used in a solid or granular form and as such this study is not required.

 

Vapour pressure

The vapour pressure of the test item has been determined to be 2.7E-02 Pa at 25°C (298K) and 21 Pa at 150 °C (423K) (OECD 104 and EU Method A.4)

 

Octanol-water partition coefficient

The partition coefficient of the test item has been determined to be in the range of 5.75E05 to > 1.0E10 with a log Pow of 5.75 to > 10 (OECD 117 and EU Method B.8)

 

Water solubility

The water solubility of the test item has been determined to be approximately 1E-05 g/L of solution at 20 ± 0.5 °C (OECD 105 and EU Method A.6)

 

Surface tension

The water solubility was determined to be less than 1 mg/L, therefore a study for surface activity is scientifically unjustified.

 

Flash point

The flash point of the test item has been determined to be 214 °C ± 2 °C (EU Method A.9; closed cup)

 

Autoflammability

The test item has been determined to be have an auto-ignition temperature of 340 ± 5 °C The test item has been determined to be have an auto-ignition temperature of 340 ± 5 °C (EU Method A.15)

 

Flammability

The substance is non-flammable based on a flash point of 214 °C.

 

Explosivity

There are no structural alerts for explosive properties within the chemical structure of the test item.

 

Oxidising

Predicted negative based on the chemical structure of the test item.

Categories Display