Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air. Symptomatic treatment. Seek
medical attention.
Emergency measure - Eyes: Rinse thoroughly with water for at least 15 minutes. Seek
medical attention if irritation persists.
Emergency measure - Skin: Wipe off excess material and then wash affected area with
soap and plenty of water. If irritation develops seek
medical attention.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide or dry powder may be used. The substance is
water soluble so water may not be suitable.

Product arising from burning: Products of combustion may contain oxides of carbon and
nitrogen.

Product determined by test: N

Protective equipment: Full personal protective equipment and a self-contained
breathing apparatus should be worn.

Accidental release measures

Emergency measures in case of spillage: Contain spillages of solutions with a dike or trench and
pump into drums or absorb with inert material (e.g. sand)
and shovel into clean-up drums. Gloves, eye protection and
protective clothing should be worn. New drums should be
clearly labelled and the contents disposed of in accordance
with local regulations. Avoid release to drain.

Handling and storage

Handling: The substance should be stored, handled and used in
condtions of good industrial hygiene practice and in
conformity with any local regulations in order to avoid
exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374.

Chemical resistant clothing to Standard EN368.

Eye protection to Standard EN166.


When necessary, appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.

Storage: Store in a cool, dry, well-ventilated area, away from
sources of ignition.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 55 gallon lined steel drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None
Transport: The substance does not meet any of the criteria for
classification as hazardous in transport.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: The substance will only ever be supplied as a liquid
preparation and so will not present a dust explosion hazard.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: In principle, it may be possible to recover uncontaminated
substance.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Incineration is possible at a suitable facility. Waste gas
scrubbing to remove oxides of carbon and nitrogen is
required.

Industry - Possibility of destruction - water purification: Not recommended.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.