Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Move the person away from the contaminated area into fresh air. Consult a doctor in the event of any complaints.
Skin contact:
Remove all contaminated clothing and footwear. Wash off with water. Use appropriate protective equipment when treating a contaminated person. Consult a doctor in the event of any complaints.
Eye contact:
Rinse with running water whilst keeping the eyes wide open (at least 15 minutes). After initial flushing, remove any contact lenses and continue flushing. If irritation persists, consult a doctor. Show this sheet to the doctor.
NEVER attempt to induce vomiting. Wash out mouth with water. Do not give anything to drink. Consult a doctor in the event of any complaints.
Protection of first-aiders:
Avoid exposure. If a great quantity of dust is formed: 1 respiratory protection with a particle filter. 2 appropriate gloves 3 goggles and 4 protective clothing.
Further information: place contaminated cloting in a sealed bag for disposal.

Fire-fighting measures

Suitable extinguishing media: preferable use: water or foam. All types of extinguishing agents are permitted.
Not suitable extinguishing media: None. If there is a fire close by, use suitable extinguishing agents.
Specific hazards: Not combustible. Does not present any particular risk in the event of a fire.

Accidental release measures

Personal precautions:
Prevent formatio of clouds of dust. Do NOT intervene without a dust mask.
Personal protective equipment: 1 Safety spectacles, goggles. 2 Suitable protective clothing 3 Appropriate gloves 4 Respiratory protection device with a particle filter.
Environmental precautions.
This product does not present any particular risk for the environment. Prevent dispersion.
Methods for cleaning up:
- Recovery: Collect up the product and place it in a spare container, suitable labelled.
- Cleaning/Decontamination: Wash contaminated area with large amounts of water.

Handling and storage

Technical measures: Does not necessitate any specific/particular technical measures, other than those concerning the handling of powders.
Measures: Avoid the formation of spread of dust in the atmosphere.
Safe handling advice: Only use in well-ventilated areas.
Technical measures: Does not require any specific or particular technical measures.
Storage conditions: Stable under normal storage conditions
Incompatible products: Acids; H2O2
Packaging: Product must only be kept in the supplier's packaging.
Packaging materials: Plastic materials.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures: Ensure good ventilation of the work station.
Occupational exposure limits: TWA: 5 mg/m3; STEL: 10 mg/m3
Personal protective equipment:
- Respiratory protection: If dust is generated: respiratory protective device with a particle filter (type 1)
- Hand protection: Appropriate gloves. Protective gloves must be chosen accordig to the function of the work station: other chemicals which may be handled, physical protection necessary (resistance to cutting, puncture, heat), dexterity required. Use suitable chemical-resistant protective gloves (compliant with Standard EN 374-1)
- Eye protection: Safety spectacles
- Skin and body protection: protective clothing.

Stability and reactivity

Stability: stable under normal conditions of use.
Conditions to avoid: No dangerous reactions known under normal conditions of use. Keep away from moisture and heat. Avoid generation of dust.
Materials to avoid: acids.
Hazardous decomposition products: none.

Disposal considerations

Residues from product:
Destruction/Disposal: Dispose of materials or solid residues at a licensed site. Keep waste separate. Because of possible pollution, remove as industrial waste or hazardous waste.
Contaminated packaging:
Decontamination/cleaning: clean with water.
Destruction/disposal: Entrust the thoroughly decontaminated packaging to a licensed waste-contractor.
Methods of disposal: disposal according to the local legislation.