Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:
Move out of dangerous area.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

If inhaled:
Move to fresh air.
Do not leave the victim unattended.
Causes asphyxiation in high concentrations. The victim will not realize that he/she is suffocating.
Keep warm and at rest and provide fresh air.
Seek medical advice immediately.
Give oxygen or artificial respiration if needed.
If unconscious place in recovery position and seek medical advice.
In case of breathing difficulties, apply mouth to mouth

In case of skin contact:
Wash frost-bitten areas with plenty of water. Do not remove contaminated clothing.
Do not rub affected area.
Seek medical advice.

In case of eye contact:
Remove contact lenses.
Rinse immediately with plenty of water for at least 15 minutes.
Keep eye wide open while rinsing.

If swallowed:
Not probable:The product evaporates readily.

Most important symptoms and effects, both acute and delayed
Inhalation may provoke the following symptoms:

Skin contact may provoke the following symptoms:

Indication of any immediate medical attention and special treatment needed
Treat frost-bitten areas as needed.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Dry powder, carbon dioxide, foam and water mist.

Unsuitable extinguishing media:
Do NOT use water jet.

Special hazards arising from the substance or mixture

Specific hazards during firefighting:
Incomplete combustion may produce:
Carbon monoxide
Vapours may form explosive mixtures with air.

Advice for firefighters
Special protective equipment for firefighters:
Wear self-contained breathing apparatus and protective suit.

Further information:
Attempt to stop leakage without personal risk.
If conditions permit, let fire burn itself out.
Cool containers/tanks with water spray.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Personal precautions:
Keep people away from and upwind of spill/leak.
Vapours can cause suffocation by reducing oxygen available
for breathing.
Use personal protective equipment.
Eliminate all ignition sources if safe to do so.
Attempt to stop leakage without personal risk.

Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Prevent product from entering environment and drains.
Observe the risk of explosion.
If major spillage occurs, contact the proper local authorities.

Methods and material for containment and cleaning up:
Allow to evaporate.
Ensure adequate ventilation, especially in confined areas.

Handling and storage

Precautions for safe handling

Advice on safe handling:
Refill and handle product only in closed system.
Prevent leaks by checking valves, pipelines and joints regularly.

Advice on protection against fire and explosion:
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. To avoid ignition of vapours by static electricity discharge, all metal parts of the equipment must be grounded. Ensure adequate ventilation. Risk of explosion if heated under confinement. Vapours may form explosive mixtures with air. High risk of fire in case of leakage.

Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers:

Keep container tightly closed in a cool, well-ventilated place. Keep product and empty container away from heat and sources of ignition. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Advice on common storage:
Keep away from combustible material.

Specific end use(s)
Specific use(s):
Not applicable.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations