Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

4.1. Description of first aid measures

General information
Remove soiled or soaked clothing immediately
After inhalation
Ensure supply of fresh air.
Take medical treatment.

After contact with skin
After contact with skin, wash immediately with plenty of water and soap.
Consult a doctor if skin irritation persists.

After contact with eyes
Immediately rinse eyes under running water (approximately 15 minutes, or use an emergency
eyewash). Always consult a physician.

After ingestion
Rinse mouth thoroughly with water.
Call in a physician immediately and show him the Safety Data Sheet.

4.2. Most important symptoms and effects, both acute and delayed

No symptoms known currently.

No hazards known at this time.

4.3. Indication of any immediate medical attention and special treatment needed

Treat symptomatically.

Fire-fighting measures

5.1. Extinguishing media

Suitable extinguishing media
water spray jet
dry powder
carbon dioxide

5.2. Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed:
carbon oxides
nitrogen oxides
Sulphur oxides
Hydrogen chloride (HCl)

5.3. Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus

Further information
Cool container and metallic parts with a water spray jet

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Wear personal protective equipment. Unprotected persons must be kept away.

6.2. Environmental precautions
Do not allow entry to drains,water courses or soil

6.3. Methods and material for containment and cleaning up
Take up mechanically
Avoid raising dust
Dispose of absorbed material in accordance with the regulations.

6.4. Reference to other sections
Additional information
Combustible solid

Handling and storage

7.1. Precautions for safe handling

Advice on safe handling
Keep containers tightly closed
Avoid the formation and deposition of dust.
Provide good ventilation of working area (local exhaust ventilation if necessary).
Preferably handle in closed system.
Ventilation, local exhaust required.

Hygiene measures
Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Wash hands before breaks and after work.
Use barrier skin cream.

Advice on protection against fire and explosion
Avoid formation of dust.
Keep away from sources of ignition.
Observe the usual precautionary measures required for chemicals with dust explosive
properties (Observe national regulations).

7.2. Conditions for safe storage, including any incompatibilities

7.3. Specific end use(s)
No further recommendations.

Transport information

Land transport (ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not restricted
Remarksopen allclose all

Additional transport information

Additional transport information
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International
Bulk Chemicals Code):

No transport as bulk according IBC - Code.

Exposure controls / personal protection

8.1. Control parameters
Exposure limit values
Exposure limit values are not available.

DNEL/DMEL values
DNEL/DMEL values are not available.

PNEC values
PNEC values are not available.

8.2. Exposure controls
General protective measures
Do not inhale dust
Avoid contact with eyes and skin
Respiratory protection : In case of dust formation, use a fine dust face mask.
Hand protection : Chemical resistant gloves
Observe the information of the glove manufacturers on
permeability and breakthrough times and other workplace
Eye protection : safety glasses
Body protection : working clothes

Stability and reactivity

10.1. Reactivity
See section 10.3. "Possibility of hazardous reactions"

10.2. Chemical stability

10.3. Possibility of hazardous reactions
Risk of dust explosions.

10.4. Conditions to avoid
Strong oxidizing agents.

10.5. Incompatible materials
not known

10.6. Hazardous decomposition products
When used and handled as intended, none.

Disposal considerations

13.1. Waste treatment methods

In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging
For disposal local regulation is binding.

C (37,9%)
H (3,6%)
N ( 6,3%)
O ( 21,7%)
Cl (16,0%)
S (14,5%)