Registration Dossier

Administrative data

First-aid measures

Emergency Measure - Inhalation: - If inhalation of the product is suspected, remove exposed person to fresh air, and give rest. If the patient continues to feel unwell, obtain medical attention. For respiratory irritation or difficulties in breathing seek immediate medical attention. (Treat symptomatically).
Emergency Measure - Eyes: - In case of contact with eyes, irrigate with water for 10 minutes, occasionally lifting eyelids, and removing contact lenses if easy to do. Seek medical advice if irritation (pain, redness, or swelling) or other symptoms persist.
Emergency Measure - Skin: - Remove contaminated clothing and wash affected area with soap and water. Get medical attention if irritation occurs. Launder contaminated clothing before re-use.
Emergency Measure - Ingestion is not considered a potential route of exposure. If swallowed, wash out mouth thoroughly and give water to drink. Seek immediate medical attention if ingested occurs. Do not induce vomiting, unless instructed by medical personnel. (Treat symptomatically).

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide, dry chemical powder and alcohol-resistant foam are recommended. Remove containers away from fire or cool them with water.
Unsuitable extingushing agents: None specified.
Product arising from burning: - The substance is combustible and will burn if involved in a fire, evolving noxious fumes including oxides of carbon.
Product determined by test: No


Protective equipment:
Full protective clothing and self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) must be worn.
Fight the fire from a safe distance or protected location.
Avoid breathing smoke, fumes and decomposition products.

Accidental release measures

Emergency measures in case of spillage:
Evacuate personnel from immediate vicinity.
Wear appropriate personal protective equipment conforming to the relevant national or international standards.
For the substance as such (not anticipated to be applicable under current supply route)
Avoid dust formation. Sweep up powder or absorb spillages of solutions with a suitable inert material (eg. sand or soil). Carefully transfer the spillage to waste containers, or use a sealed industrial vacuum machine. Containers filled with waste material must be labelled in the same way as the original substance containers.
For the substance as imported into the EU as a component of a mixture
For large-scale spills, ensure full personal protection is worn. Keep unauthorised personnel from the spillage area.
Prevent product from entering water-courses or drainage system.
Stop the source of leak or release. Clean up spill as soon as possible. Small spills can be mopped up with cloth or paper. Collect larger spill using an inert sorbant, or pumping techniques. Place material in suitable container for disposal in accordance with local and national regulations.
Wash contaminated surfaces with water and detergent, and collect washings for safe disposal. Follow prescribed procedures for responding to large spills and reporting to appropriate authorities.
Dispose of waste material resulting from a spill in accordance with local regulations by incineration.

Handling and storage

HANDLING:

The substance should be stored, handled and used under conditions of good industrial hygiene and in conformity with any local regulations in order to avoid exposure.
Avoid prolonged contact with skin or eyes. Do not handle in a manner that creates excessive dust. Provide appropriate ventilation and secure container after each use.
Engineering controls are necessary to reduce exposure to the substance.
When exposure cannot be prevented or adequately controlled appropriate personal protective equipment should be worn. Such protective equipment should conform to the appropriate international or national standards as follows;
*Chemical protective gloves to Standard EN374
*Chemical protective clothing to Standard EN368
*Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be used, it must be capable of adequately controlling exposure, be suitable for the purpose, and conform to the appropriate international or national standards, such as a dust mask conforming to EN149 FFP1.
These measures should be regarded as minimum.

STORAGE
Should be stored at room temperature in a dry, well ventillated area. Container should be closed after use.
Avoid extreme temperatures and direct sunlight.

Transport information

Land transport (ADR/RID)

UN number:
Not applicable.
Shippingopen allclose all
Class:
Not applicable.
Classification code:
Not applicable.
Packaging group:
Not applicable.
Labels:
Not applicable.
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable.
Shippingopen allclose all
Class:
Not applicable.
Classification code:
Not applicable.
Packaging group:
Not applicable.
Labels:
Not applicable.
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable.
Proper shipping name and description:
Not applicable.
Chemical name:
Not applicable.
Class:
Not applicable.
Packaging group:
Not applicable.
EmS code:
Not applicable.
Labels:
Not applicable.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable.
Proper shipping name and description:
Not applicable.
Chemical name:
Not applicable.
Class:
Not applicable.
Packaging group:
Not applicable.
Labels:
Not applicable.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

The need for personal protective equipment should be based on a workplace risk assessment for the particular use. Avoid skin and eye contact by wearing chemical resistant gloves (eg nitrile, neoprene, PVC) and safety goggles. Where more extensive contact may occur, wear suitable protective clothing (eg apron, sleeves, boots).
Wear suitable respiratory protective equipment if exposure to spray or vapour is likely.
Consult manufacturers concerning breakthrough times. PPE should be to European (EN) standards
*Chemical protective gloves to Standard EN374
*Chemical protective clothing to Standard EN368
*Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be used, it must be capable of adequately controlling exposure, be suitable for the purpose, and conform to the appropriate international or national standards, such as a dust mask conforming to EN149 FFP1.
The above standards should be regarded as a minimum.

Stability and reactivity

Danger other than fire: Material is not known to be reactive towards water or other solvents.

Chemical reaction with water: None which is hazardous.

Dust explosion: Under normal conditions of use this material does not present a significant explosion hazard as it is only ever imported into the EU as a component of a liquid preparation/mixture. However, as with most organic powder samples, explosive mixtures can be formed with sufficient concentrations of dust combined with air.

Dust explosion determined by test: No

Materials to avoid: Acids and oxidising agents

Disposal considerations

Industry - Possibility of recovery / recycling: - Under normal application the substance is a component of a mixture and it is not thought possible/appropriate to recycle the substance. Spillages should be recovered for disposal at an appropriate licensed incineration facility.

Industry - Possibility of neutralization: - No known method.

Industry - Possibility of destruction: controlled discharge: - Not recommended.

Industry - Possibility of destruction - incineration: The substance should be disposed of by incineration in a proper installation, Stack gases should be scrubbed.

Industry - Possibility of destruction - water purification: --- no data

Industry - Possibility of destruction - other: --- no data

Public at large - Possibility of recovery / recycling: - Under normal application the substance is a component of a mixture and it is not thought possible/appropriate to recover/recycle the substance. Due to the likely maximum quantity of the substance involved (12ml of ink containing the substance at 5%) spillages should be recovered for disposal along with general household waste.

Public at large - Possibility of neutralization: - Dilution with water.

Public at large - Possibility of destruction: controlled discharge: - Not applicable.

Public at large - Possibility of destruction - incineration: - Not applicable.

Public at large - Possibility of destruction - water purification - Not applicable.

Public at large - Possibility of destruction - others: - Not applicable.