Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 232-401-3 | CAS number: 8016-11-3
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- calculation (if not (Q)SAR)
- Adequacy of study:
- supporting study
- Study period:
- 29 July 2010
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
- Qualifier:
- according to guideline
- Guideline:
- other: SPARK estimate
- Principles of method if other than guideline:
- A Rigorous Test for SPARC's Chemical Reactivity Models: September 2009 release w4.5 1529-s4.5.1529
- GLP compliance:
- no
- Type of method:
- other: SPARK estimate
- Key result
- Type:
- density
- Density:
- ca. 0.95 g/cm³
- Conclusions:
- According to the SPARC (ibmlc2.chem.uga.edu/sparc) calculation tool, the predicted density of Epoxidised linseed oil (ELO) was 0.95 g/mL
- Executive summary:
According to the SPARC (ibmlc2.chem.uga.edu/sparc) calculation tool, the predicted density of Epoxidised linseed oil (ELO) was 0.95 g/mL
- Endpoint:
- density
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 18 August 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Qualifier:
- according to guideline
- Guideline:
- other: No guideline listed
- GLP compliance:
- no
- Type of method:
- oscillating densitimeter
- Key result
- Type:
- density
- Density:
- > 1.031 - < 1.038 g/cm³
- Temp.:
- 25 °C
- Conclusions:
- The density of Epoxidised Linseed Oil was measured to be 1.035 g/mL at 25 oC.
- Executive summary:
The density of Epoxidised Linseed Oil was measured to be 1.035 g/mL at 25 oC.
Referenceopen allclose all
No further information
Description of key information
The density of Epoxidised Linseed Oil was measured to be 1.035 g/mL at 25 oC.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.035
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
