Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 939-350-2 | CAS number: 85409-22-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial Use of Me-salts in conversion coating - Nickel
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial Use of Me-salts in conversion coating - Zinc, Chromium, Copper, Manganese
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial uses; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Long term
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 14: Metal surface treatment products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Sector of end use:
- SU 0: Other: SU3: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2a: Mining (without offshore industries)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Automated task; Semi-automated task; Dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Long term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Short term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance (PROC28 assessed as);
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Conditions and measures related to external treatment of waste (including article waste)
- Particular considerations on the waste treatment operations:
- other:
Other conditions of use
Other conditions affecting environmental exposure
- Place of use:
- indoor
OtherConditionsEnvirExpRepopen allclose all
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v3: Industrial use of Water-borne Processing Aids
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v3: Industrial use of Water-borne Processing Aids
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v3: Industrial use of Water-borne Processing Aids
Release to external waste
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- General industrial use of lubricants and greases in vehicles or machinery
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- General industrial use of lubricants and greases in vehicles or machinery
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use as lubricant/grease in a closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Initial factory fill from header tank: lubricating oil
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Initial factory fill by pouring from containers: lubricating oil
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Initial factory fill by injection of greases
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Initial factory fill by injection of greases
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Maintenance activities at industrial settings
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Regulatory status:
- use in cosmetics products
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial processing
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Processing
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 4: Manufacture of food products
- SU 6a: Manufacture of wood and wood products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use in offshore and onshore systems
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed Batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Transfer of substance or preparation (charching/discharging) from/to vessels/large Containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 40: Extraction agents
- PC41: Oil and gas exploration or production products
- Sector of end use:
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Process with opportunity for exposure
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer activities at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer activities at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC41: Oil and gas exploration or production products
- Sector of end use:
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Offshore use
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Process with opportunity for exposure
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch process
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer activities at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer activities at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC41: Oil and gas exploration or production products
- Sector of end use:
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of mixtures at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
ATIEL Group A - Industrial use of formulations including lubricant additives, lubricants and greases
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of formulations including lubricant additives, lubricants and greases
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed continuous processes at elevated temperature with sampling, including grease manufacture
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed batch process with sampling, blending and filling including small and bulk quantity additions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Open batch processes including blending, filling, mixing and addition of both bulk and small quantities
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Open batch processes including blending, filling, mixing and addition of both bulk and small quantities
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Sample collection of formulation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Sample collection of incoming raw materials
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Bulk transfers by fixed pipe or flexible hose
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Small pack (drum/bag) transfers - dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Small pack (drum/bag) transfers - non dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Top filling of bulk containers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Filling of drums and small packages
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- QC & Laboratory
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Maintenance & cleaning
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 17: Hydraulic fluids
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Offshore use
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Transfer of substance or mixture (charging/discharging) at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Use as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 21: Laboratory chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed Batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing or blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of substance or preparation (charching/discharging) from/to vessels/large Containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 14: Metal surface treatment products
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of non-reactive processing aid
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial use, used in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use, used in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; semi-automated Task; dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Long term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance;
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 4: Manufacture of food products
- SU 6a: Manufacture of wood and wood products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use as intermediate registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of processing aids
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of chemicals from/to vessels/ large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of chemicals into small containers (dedicated filling line)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC41: Oil and gas exploration or production products
- Sector of end use:
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Technical and organisational conditions and measures
Other technical and organisational conditions
Effectiveness
- Route affected:
- water
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- no
Conditions and measures related to external treatment of waste (including article waste)
- Particular considerations on the waste treatment operations:
- no
Other conditions affecting environmental exposure
OtherConditionsEnvirExpRepopen allclose all
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- estimated release factor
- Remarks:
- Site specific information
- Release from the site to::
- ambient air
- Release estimation method:
- estimated release factor
- Remarks:
- Site specific information
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Automated task; Semi-automated task; Dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Long term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Brushing; Automated task; medium RMM
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Transfer and dilution of concentrated product by using dedicated dosing system
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Use in closed process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial use; Automated task; Semi-automated task; Dedicated equipment
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Long term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying; Automated task; Open systems; Short term
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Brushing; Automated task
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial uses; Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Equipment maintenance;
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
- Place of use:
- indoor
OtherConditionsEnvirExpRepopen allclose all
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v2: Industrial use of water-borne Processing Aids - no RMM
- Release from the site to::
- ambient air
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v2: Industrial use of water-borne Processing Aids - no RMM
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- SpERC
- Remarks:
- AISE 4.1.v2: Industrial use of water-borne Processing Aids - no RMM
Release to external waste
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) short-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) local concentration on skin
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of lubricants and greases in open systems
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Material storage
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Manual filling of lubricant container i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated filling of lubricant container i.e. bath or tank
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Automated filling of lubricant container i.e. bath or tank
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Automated roller application or brushing of coatings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Spraying onto equipment or article
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping or pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Draining, maintenance and cleaning of equipment
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 24: Lubricants, greases, release products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
