Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Toxicological information

Dermal absorption

Currently viewing:

Administrative data

dermal absorption, other
in silico
Type of information:
calculation (if not (Q)SAR)
Adequacy of study:
key study
Study period:
January 17, 2019
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
accepted calculation method
Justification for type of information:
See the attached justification.

Data source

Referenceopen allclose all

Reference Type:
other: software
IH SkinPerm v2.04
AIHA Exposure Assessment Strategies Committee (EASC) and the Dermal Project Team (DPT) in collaboration with Wil ten Berg
Bibliographic source:
Tibaldi, R., ten Berge, W., Drolet, D.. IH SkinPerm v2.0 Reference Manual.
Reference Type:
other company data
Report date:

Materials and methods

Test guideline
other: ECHA Guidance on information requirements and chemical safety assessment - Chapter R.06: QSARs and grouping of chemicals
Principles of method if other than guideline:
See the justification for type of information.

Test material

Constituent 1
Chemical structure
Reference substance name:
1,2,4-trinonyl benzene-1,2,4-tricarboxylate
EC Number:
Cas Number:
Molecular formula:
not applicable, UVCB substance
1,2,4-trinonyl benzene-1,2,4-tricarboxylate
Test material form:
Details on test material:
- Other: The constituent is an UVCB substance that, for the scope of (Q)SAR estimations, starting from the original composition was characterized by a PCA (Principal Component Analysis) in 15 representative components as follows:


trinonyl benzene-1,2,4-tricarboxylate

1-(2-methyloctyl) 2,4-dinonyl benzene-1,2,4-tricarboxylate

2-(2-methyloctyl) 1,4-dinonyl benzene-1,2,4-tricarboxylate

4-(2-methyloctyl) 1,2-dinonyl benzene-1,2,4-tricarboxylate

1-(2-ethylheptyl) 2,4-dinonyl benzene-1,2,4-tricarboxylate

2-(2-ethyheptyl) 1,4-dinonyl benzene-1,2,4-tricarboxylate

4-(2-ethyheptyl) 1,2-dinonyl benzene-1,2,4-tricarboxylate

1-(2-propylhexyl) 2,4-dinonyl benzene-1,2,4-tricarboxylate

2-(2-propylhexyl) 1,4-dinonyl benzene-1,2,4-tricarboxylate

4-(2-propylhexyl) 1,2-dinonyl benzene-1,2,4-tricarboxylate

2-undecyl 1,4-dinonyl benzene-1,2,4-tricarboxylate

1-(2-propylhexyl) 2-(2-methyloctyl) 4-nonyl benzene-1,2,4-tricarboxylate

1-octyl 2,4-dinonyl benzene-1,2,4-tricarboxylate

1-decyl 2-nonyl 4-(2-methyloctyl) benzene-1,2,4-tricarboxylate

tris(2-methyloctyl) benzene-1,2,4-tricarboxylate

Results and discussion

Percutaneous absorption
Time point:
2 h
Deposition dose: 4694 mg (instantaneous)
<= 0 mg cm-2 h-1

Any other information on results incl. tables


As seen in the test materia definition, ‘Esterification products of 1,3-dioxo-2-benzofuran-5-carboxylic acid with nonan-1-ol’ is an UVCB substance that can be characterized in significant and reliable way, after a PCA (Principal Component Analisys) statistical procedure, by 15 principal components.

As key values for the dermal absorption of the above substance, we can select the endpoints related to trinonyl benzene-1,2,4-tricarboxylate, quantitatively the main component of the UVCB, which values are within the estimated range of the 15 principal components.


EC name: trinonyl benzene-1,2,4-tricarboxylate

CAS number: 35415-27-1

Molecular weight: 588.86

Temperature: 20 deg C

Vapour Pressure (extrap. from exp.): 3.4E-08 Pa

Water solubility (calc.): 5.89E-7 mg/L

Log Kow (exp., skin, pH= 5.5): 10.8

Density (exp.): 978 mg/cm3

Melting Point (exp.): -53 deg C

Scenario parameters

Instantaneous deposition

- Istantaneous deposition dose(1): 4694 mg

- Affected skin area(2): 1000 cm2

- Maximum skin adherence(3): 7 mg/ cm2

- Thickness of stagnant air(4): 1 cm

- Weight fraction(5): 1

Timing parameters

- Start deposition: 0 hr

- End time observation: 2 hr

Report parameters

- Calculation intervals/hours: 7200

- Report intervals/hours: 60

(1) The instantaneous dose may occur by a splash or direct contact. The maximum amount of substance remaining on the skin is limited to 25 times the affected skin area (cm2). In case of instantaneous exposure, the duration of deposition and the dermal deposition rate are not considered in the calculation.

Approximately 2 mL of a liquid having a viscosity similar to water will practically wet the palms of two hands (ca. 420 cm2). So 4.8 mL will wet all the skin surface of both hands; the expected more liquid will be excess and wash/fall off.

(2) Estimated skin surface of two hands of an adult. The assumed maximum full body surface of an adult, is 2000 cm2. The minimum is set to 0.1 cm2, the fingertip in contact with liquid or solid.

(3) In case of liquids any value between 0 and 7 mg/cm2, and in case of solids any value between 0 and 3 mg/cm2 is allowed. This value means that the mass of the substance on the skin surface will not exceed the input value. If deposition results in an increased mass on the skin above the input vale, it is assumed that the surplus gets lost from the skin.

(4) Average thickness of air layer around the body accounting for diffusive resistance of substance in air through work clothing. Apply 3 cm. in case of light clothes and 1 cm in case of nude skin.

(5) The fraction of the substance within the mixture based on weight. It means the weight of the substance divided by the weight of the solution it is in. An example may be 0.8 for a highly concentrated solution.


Deposition: Instantaneous

Tot. Deposition: 4694 mg

End time observation: 2 hr


Fraction absorbed: 0.0%

Amount absorbed: 0.0 mg

Lag time stratum corneum: 32.5 min.


Max. derm. abs.: 1.15E-08 mg/cm2/hr

Max. derm. abs. for 2000 cm2in 1 hour (from liquid): 0.00 mg

Dermal/Respiratory uptake ratio (from airborne vapour): R= 0.803


RX: total dermal absorption by dermal exposure to airborne vapour

X: total inhalation absorption from airborne vapour

Assuming that Fully Respiratory Protection provides 100% efficiency:

Protection from respirator= 100*X/(RX+X)= 100/(R+1)= 100/1.803=55.5%

protection against overexposure to the substance in the form of vapour due to dermal vapour absorption over whole body surface.

Applicant's summary and conclusion

The dermal absorption of ‘Esterification products of 1,3-dioxo-2-benzofuran-5-carboxylic acid with nonan-1-ol’ leads to the following results, obtained using the SkinPerm v2.04 model according to the input data:

Fraction absorbed: 0.0%
Amount absorbed: 0.0 mg
Lag time stratum corneum: 32.5 min.

Max. derm. abs.: 1.15E-08 mg/cm2/hr
Max. derm. abs. for 2000 cm2 in 1 hour (from liquid): 0.00 mg

Dermal/Respiratory uptake ratio (from airborne vapour): R= 0.803
Executive summary:

In-silico evaluation of dermal absorption shows that after 2 hours only practically no amount of deposited substance are absorbed within viable epidermis and therefore could enter in systemic circulation.