Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 214-192-0 | CAS number: 1112-55-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 2019-08-23 to 2019-09-04
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to same study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC))
- Version / remarks:
- 2001
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- HPLC estimation method
- Specific details on test material used for the study:
- Batch No.: 707001
Purity: 98.5% - Radiolabelling:
- no
- Details on study design: HPLC method:
- EQUIPMENT
- Apparatus: HPLC 2695 system (C2019-003)
- Column: ECLIPSE XDB-CN (4.6×250 mm, 5 μm)
- Oven temperature: 30℃
- Detection wavelength: 210 nm
- Mobile phase: Methanol/Water =60/40
- Flow rate: 1.2 mL/min
- Injection volume: 5.0 µL
DETERMINATION OF DEAD TIME
- Method: The NaNO3 solution was injected for three times at the HPLC condition, and the average value of three retention times was considered to be the dead time t0
REFERENCE SUBSTANCES
- Identity: N,N-dimethylbenzamide, atrazine, naphthalene, triazophos, phenanthrene and p,p'-DDT
DETERMINATION OF RETENTION TIMES
REPETITIONS
- Number of determinations:
The injection sequence was as below:
(1) Inject reference substance individually for the first time, and record the tR1;
(2) Inject test item for one time, and record the tR;
(3) Inject reference substance individually for the second time, and record tR2;
The average value of tR1 and tR2 is calculated to be the tR of reference substance, which was employed in the k' calculation.
EVALUATION
- Calculation of capacity factors k': k'=(tR-t0)/t0
- Determination of the log Koc value: log Koc = a x lgk' + b - Type:
- log Koc
- Value:
- 2.75 dimensionless
- Details on results (HPLC method):
- - Retention times of reference substances used for calibration: 2.791, 3.165, 4.019, 4.442, 5.773, 9.615 min for N,N-dimethylbenzamide, atrazine, naphthalene, triazophos, phenanthrene and p,p'-DDT, respectively.
- Details of fitted regression line (log k' vs. log Koc): First calibration plot was log Koc=5.1954 × log k' + 1.6673, R2=0.9609; The second calibration plot: log Koc=5.2153 × log k' + 1.6688, R2=0.9610. The estimated log Koc of test item was 2.75.
- Average retention data for test substance: tR =3.999 - Validity criteria fulfilled:
- not specified
- Conclusions:
- The estimated log Koc of test item was 2.75.
- Executive summary:
The HPLC method on the basis of OECD Test No. 121 was employed to estimate the Koc of test item. Six reference points including N,N-dimethylbenzamide, atrazine, naphthalene, triazophos, phenanthrene and p,p'-DDT were employed in the HPLC method. The estimated log Koc of test item was 2.75.
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 2019-08-23 to 2019-09-04
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 106 (Adsorption - Desorption Using a Batch Equilibrium Method)
- Version / remarks:
- 2000
- Deviations:
- yes
- Remarks:
- The recovery rate of moist soil exceeded the acceptable range. But the extent of deviation was little. It did not affect the test
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- batch equilibrium method
- Media:
- soil
- Specific details on test material used for the study:
- Batch No.: 707001
Purity: 98.5% - Radiolabelling:
- no
- Test temperature:
- 20-25 °C
- Analytical monitoring:
- yes
- Details on sampling:
- Both the concentration of aqueous phase and soil phase were measured on the 2nd and 4th hour to calculate the adsorption percentage and mass balance rate.
- Matrix no.:
- #1
- Matrix type:
- other: Paddy Soil
- % Org. carbon:
- 1.14
- pH:
- 6.88
- Matrix no.:
- #2
- Matrix type:
- other: Aquic brown soil
- % Org. carbon:
- 1.19
- pH:
- 5.47
- Matrix no.:
- #3
- Matrix type:
- other: Red Soil
- % Org. carbon:
- 1.13
- pH:
- 4.93
- Matrix no.:
- #4
- Matrix type:
- other: Black Soil
- % Org. carbon:
- 1.16
- pH:
- 6.54
- Matrix no.:
- #5
- Matrix type:
- other: Black Soil
- % Org. carbon:
- 0.71
- pH:
- 787
- Details on matrix:
- Soil type Batch No. Soil location
Paddy Soil 20170206 Huai'an, Jiangsu province
Aquic brown soil 20170901 Shenyang, Liaoning province
Red Soil 20170119 Qidong, Hunan province
Black Soil 20170308 Suihua, Heilongjiangprovince
Moisture soil 20150906-3 Heze, Shandong province - Details on test conditions:
- Tier 1-preliminary test (Solution/soil ratio 5:1)
5.0 g soil with 25.0 mL solution (0.01mol/L CaCl2 solution) was agitated at 160rpm for at least 12h at 20~25°C in order to achieve pre-equilibrium. After pre-equilibration, 68 μLworking solution of 1814 mg/Lwas added into the aqueous phase to achieve a nominal concentration of 5 mg/L. And then another 4 hours agitation was run to reach adsorption equilibrium.
Both the concentration of aqueous phase and soil phase were measured on the 2nd and 4th hour to calculate the adsorption percentage and mass balance rate.
The two control units were also performed in same condition, 1) blank soil with 0.01mol/L CaCl2 solution but without the test item; 2) 0.01mol/L CaCl2 solution with the test item of 5 mg/L but without soil. - Computational methods:
- The percentage of the chemical adsorbed (A, %) is calculated as:
A=Mad/MR x 100
Where:
A—Adsorption percentage, expressed as %
Mad—Mass of test item adsorbed on soil (μg)
MR—Residual mass of test item (μg)
The mass balance (MB, %) is calculated as follow:
MB=(Mt + Ce x Ve)/M0 x 100
Where:
Ce—Concentration of substance remaining in CaCl2 solution after adsorption equilibrium reached (µg/mL)
Ve—Volume of supernatant recovery after adsorption equilibriumreached (mL)
Mt—Mass of test item extracted from both the soil and aqueous phases in a tube after adsorption equilibrium reached (μg)
M0—Nominal mass of test item (μg) - Remarks on result:
- not determinable
- Remarks on result:
- not determinable
- Details on results (Batch equilibrium method):
- PRELIMINARY TEST
The concentration in water and soil phases on the 2nd and 4th hour were all lower than the LOD, i.e.0.05 mg/L, so the adsorption percentage and mass balance were not able to be calculated. The test item was extremely unstable in the water/soil system. The initial concentration was set as 5mg/L, the control unit without soil on the 2nd hour was 4.140 and 4.045 mg/L, while that of the 4th hour was 3.360 and 3.350 mg/L, respectively.This also indicated that the test item was not stable in aquatic solution, which may be attributed into the volatility of the test item.
- Validity criteria fulfilled:
- not applicable
- Conclusions:
- The test item was extremely unstable in the water/soil system. The batch equilibrium method was not suitable the present test item.
- Executive summary:
A batch equilibrium method was performed on the basis of OECD Guidelines No.106.
5.0 g soil with 25.0 mL solution (0.01mol/L CaCl2 solution) was agitated at 160 rpm for at least 12h at 20~25°C in order to achieve pre-equilibrium. After pre-equilibration, 68 μLworking solution of 1814 mg/Lwas added into the aqueous phase to achieve a nominal concentration of 5 mg/L. And then another 4 hours agitation was run to reach adsorption equilibrium.
However, the test item in the water/soil system was severely unstable during test period, the test item in both soil and water phases cannot be determined on the 2ndand 4thhour. The batch equilibrium method was not suitable the present test item.
Referenceopen allclose all
Description of key information
The test item in the water/soil system was extremely unstable within 4 hours, which maybe attributed into the volatility of the test item. Due to batch equilibrium method was not suitable the present test item, the HPLC method was subsequently employed to estimate the Koc of test item. The estimated log Koc of test item was 2.75.
Key value for chemical safety assessment
- Koc at 20 °C:
- 562.34
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)