Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 02 July 2016 - 10 October 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Justification for type of information:
- An EU A. 10 study for a similar substance is available and is used within a read-across approach. The composition of source and target substance is described and discussed in detail in the attached supporting information as well as the read-across justification.
- Reason / purpose for cross-reference:
- read-across source
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- Method A.10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
- GLP compliance:
- yes (incl. QA statement)
- Other quality assurance:
- ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
- Specific details on test material used for the study:
- Target substance:
Amidoamine 2 (UVCB, low nitrogen):
Former chemical name: Amides, from diethylenetriamine and hydrogenated palm oil
CAS No.: 1618093-67-6
New chemical name: Glycerides, C16-18 (even numbered) and their amidation products with diethylenetriamine
Physical state: pale yellowish solid at 20 °C
Batch No.: PU50070067
Purity: 100 % (UVCB)
Storage condition of test material: Room temperature, protected from light
Stability: stable under test conditions - Key result
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- 4 min
- Moisture (wt %):
- 0.1
- Remarks on result:
- not measured/tested
- Remarks:
- Estimated water content
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test. It is considered likely, that the target substance Amidoamine 2 (UVCB, low nitrogen) will have comparable flammability properties as Amidoamine (UVCB) based on the similar chemical composition.
- Executive summary:
A preliminary screening test was conducted. The pile failed to ignite during the 4 minutes that the Bunsen flame was applied. The result of the preliminary screening test obviated the need to perform the main test. The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test. It is considered likely, that the target substance Amidoamine 2 (UVCB, low nitrogen) will have comparable flammability properties as Amidoamine (UVCB) based on the similar chemical composition. It is expected that the higher concentration of saturated mono- and diglycerides and the presence of saturated triglycerides in Amidoamine 2 (UVCB, low nitrogen) will not significantly influence the flammability.
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 02 July 2016 - 10 October 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- Method A.10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
- GLP compliance:
- yes (incl. QA statement)
- Other quality assurance:
- ISO/IEC 17025 (General requirements for the competence of testing and calibration laboratories)
- Specific details on test material used for the study:
- Test item without emulsifier was investigated.
Source substance:
Amidoamine (UVCB)
Pulcra ID: DE07_2014_012_BEL66 (amidoamine without emulsifier)
Former chemical name: Amides, from diethylenetriamine and hydrogenated palm oil
Former CAS No.: 1618093-67-6
New chemical name: Triglycerides, C16-18 (even-numbered), reaction products with diethylenetriamine
Physical state: pale yellowish solid at 20 °C
Batch No.: K8 4309 L481
Expiry date of batch: 09 March 2018
Purity: 100 % (UVCB)
Stability: stable under test conditions
Storage condition of test material: Room temperature, protected from light
Target substance:
Amidoamine 2 (UVCB, low nitrogen):
Former chemical name: Amides, from diethylenetriamine and hydrogenated palm oil
CAS No.: 1618093-67-6
New chemical name: Glycerides, C16-18 (even numbered) and their amidation products with diethylenetriamine
Physical state: pale yellowish solid at 20 °C
Batch No.: PU50070067
Purity: 100 % (UVCB)
Storage condition of test material: Room temperature, protected from light
Stability: stable under test conditions - Key result
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- 4 min
- Moisture (wt %):
- 0.1
- Remarks on result:
- not measured/tested
- Remarks:
- Estimated water content
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
- Executive summary:
A preliminary screening test was conducted. The pile failed to ignite during the 4 minutes that the Bunsen flame was applied. The result of the preliminary screening test obviated the need to perform the main test.
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
Referenceopen allclose all
Description of key information
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test. It is considered likely, that the target substance Amidoamine 2 (UVCB, low nitrogen) will have comparable flammability properties as Amidoamine (UVCB) based on the similar chemical composition.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test. It is considered likely, that the target substance Amidoamine 2 (UVCB, low nitrogen) will have comparable flammability properties as Amidoamine (UVCB) based on the similar chemical composition.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.