Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 852-824-2 | CAS number: 1404220-73-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Administrative data
First-aid measures
SECTION 4: First aid measures
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
General information
4.1. Description of first aid measures
Inhalation Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact Wash off with soap and water. Get medical attention if irritation develops and persists.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Eye contact
Ingestion Rinse mouth. Get medical attention if symptoms occur.
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision.
4.2. Most important symptoms
and effects, both acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
4.3. Indication of any
immediate medical attention
and special treatment needed
Fire-fighting measures
SECTION 5: Firefighting measures
General fire hazards No unusual fire or explosion hazards noted.
5.1. Extinguishing media
Suitable extinguishing Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
media
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
5.2. Special hazards arising During fire, gases hazardous to health may be formed.
from the substance or mixture
5.3. Advice for firefighters
Special protective Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
equipment for firefighters
Special fire fighting Move containers from fire area if you can do so without risk.
procedures
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
Accidental release measures
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not touch damaged containers
or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation.
Local authorities should be advised if significant spillages cannot be contained. For personal
protection, see section 8 of the SDS.
For non-emergency
personnel
Keep unnecessary personnel away. Use personal protection recommended in Section 8 of the
SDS.
For emergency responders
Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into
drains, water courses or onto the ground.
6.2. Environmental precautions
Prevent product from entering drains.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
6.3. Methods and material for
containment and cleaning up
6.4. Reference to other For personal protection, see section 8 of the SDS. For waste disposal, see section 13 of the SDS.
sections
Handling and storage
SECTION 7: Handling and storage
Avoid contact with eyes. Provide adequate ventilation. Wear appropriate personal protective
equipment. Avoid release to the environment. Observe good industrial hygiene practices.
7.1. Precautions for safe
handling
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
7.2. Conditions for safe
storage, including any
incompatibilities
7.3. Specific end use(s) Not available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Chemical name:
- Para-Cumyl Phenol
- Language:
- English
- Labels:
- 9
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN3082
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Chemical name:
- Para-Cumyl Phenol
- Labels:
- 9
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN3082
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Chemical name:
- Para-Cumyl Phenol
- Labels:
- 9
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.2. Exposure controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Provide
eyewash station.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
General information
Eye/face protection Wear safety glasses with side shields (or goggles).
Skin protection
- Hand protection Wear appropriate chemical resistant gloves.
- Other Wear suitable protective clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
Stability and reactivity
SECTION 10: Stability and reactivity
10.1. Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability Material is stable under normal conditions.
10.3. Possibility of hazardous No dangerous reaction known under conditions of normal use.
reactions
10.4. Conditions to avoid Contact with incompatible materials.
10.5. Incompatible materials Strong oxidising agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular
weight hydrocarbons.
10.6. Hazardous
decomposition products
Disposal considerations
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Residual waste
Since emptied containers may retain product residue, follow label warnings even after container is
emptied. Empty containers should be taken to an approved waste handling site for recycling or
disposal.
Contaminated packaging
EU waste code The Waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with
local/regional/national/international regulations.
Disposal methods/information
Special precautions Dispose in accordance with all applicable regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.