Registration Dossier

Administrative data

First-aid measures

Emergency measure - Eyes: Flush eyes with water for at least 15 mins, call a
physician.
Emergency measure - Skin: Wash exposed areas with water.
Emergency measure - Ingestion: Do not induce vomiting. Obtain medical attention. In all
cases, remove contaminated clothing.

Fire-fighting measures

Recommended extinguishing agent: Extinguishing media : water, chemical foam, carbon dioxide.
May emit oxides of nitrogen and cyanide fumes on
combustion. SCBA respiratory protection required for
fire-fighting personnel.

Accidental release measures

Emergency measures in case of spillage: Material is phytotoxic. Avoid contamination of water
supplies or outfall. Control and clean up as for any
non-reactive organic solid. If spill area is on ground near
trees or other valuable plants, remove top two inches of
soil and send to incineration.

Handling and storage

Handling: Protect eyes and skin. Use approved pesticide dust
respirator if the possibility exists of inhaling dust.
Handle only in well ventilated area.

Storage: Store in cool place. Keep container tightly closed. Keep
dry.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: No hazard.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Decomposes slowly on exposure to water to give triazine and
sulphonamide. Polymerisation will not occur.

Disposal considerations

Industry - Possibility of recovery/recycling: Uncontaminated material may be reworked to meet product
specifications. Contaminated product must be destroyed (see
6.1.3).

Industry - Possibility of neutralisation: L5300 Technical may be neutralised by treatment with
caustic soda or commercial bleaching agent (sodium
hypochlorite solution) followed by conventional biological
treatment.

Industry - Possibility of destruction: controlled discharge: No.

Industry - Possibility of destruction - incineration: Dry product should be converted to an aqueous slurry before
incineration. Incineration should be carried out at 950 deg
C.

Industry - Possibility of destruction - water purification: In conjunction with preliminary neutralisation this is an
effective means of destruction.